Factors Influencing the Seismic Collapse of Stratified Steep Cliffs Based on Analytic Hierarchy Process (AHP)
Source abstract
Abstract
Rockfalls from stratified unstable rock masses on cliffs present a significant geological hazard. This study investigates their seismic failure mechanisms and quantifies the influence of key controlling factors through an integrated approach of shaking table tests and UDEC numerical simulations. The introduction of a displacement angle precisely defined failure initiation, with tests revealing that the collapse angle exhibited a strong positive correlation with block size. Numerical simulations on seven factors showed that the collapse displacement angle ranged from 9° to 21°, primarily controlled by joint spacing. The Analytic Hierarchy Process (AHP) quantified the factor priorities, identifying the degree of rock mass fragmentation as the most influential factor with a weight of 0.278, followed by seismic amplitude (0.222) and cliff slope angle (0.167). The results provide a quantitative basis for designing early-warning systems using displacement angle thresholds and prioritize targeted mitigation strategies for the most critical factors in seismic-prone regions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Landslides and related hazards · Rock Mechanics and Modeling · Seismology and Earthquake Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Transportation Engineering, Nanjing Tech University, Nanjing 210009, China
College of Civil Engineering, Kashi University, Kashi 844000, China
Funding
Key Research Projects of Kashi University · Introduction of Talent Research Initiation Fund of Kashi University · Xinjiang Key Laboratory Project of Engineering Materials and Structural Safety
References (57)
Show source-provided references
1. Experimental Field Study of Movement Characteristics of Rock Blocks Falling down a Slope10.1007/s12583-010-0096-y ↗
2. The Varnes classification of landslide types, an update10.1007/s10346-013-0436-y ↗
3. Failure forecast for large rock slides by surface displacement measurements10.1139/t02-085 ↗
4. Zhou, F., Liu, X., Tang, H., Miao, M., Xu, B., and Guo, X. (2024). Analysis of the frequency–response stability and reliability of a tower-column unstable rock mass on a high and steep slope. Sci. Rep., 14.10.1038/s41598-024-70941-2 ↗
5. Simplified analysis of coseismic slope displacement and hillslope weakening10.1016/j.enggeo.2025.108058 ↗
6. The Deformation modes of rock slopes due to excavation in mountain-type mines10.2320/matertrans.M-M2015814 ↗
7. Analysis of natural rock slope deformations under temperature variation: A case from a cool temperate region in Japan10.1016/j.coldregions.2010.11.003 ↗
8. Ning, Y., Shen, Y., Ding, T., Xu, P., Duan, F., Zhang, B., Zhang, B., and Smith, J.V. (2025). Evolution Process of Toppling Deformations in Interbedded Anti-Inclined Rock Slopes. Appl. Sci., 15.10.3390/app15147727 ↗
9. Process analysis of toppling failure on anti-dip rock slopes under seismic load in southwest China10.1007/s00603-019-01855-z ↗
10. Effect of excitation frequency and joint density on the dynamic amplification effect of slope surface on jointed rock slopes10.1016/j.enggeo.2023.107385 ↗
11. Evaluating the dynamic response and failure process of a rock slope under pulse-like ground motions10.1080/19475705.2023.2167613 ↗
12. Damage evolution of rock slopes under seismic motions using shaking table test10.1007/s00603-022-02921-9 ↗
13. Experimental study on seismic response and progressive failure characteristics of bedding rock slopes10.1016/j.jrmge.2022.06.004 ↗
14. Dynamic response characteristics and damage failure process of bedding rock slope in shaking table test10.1007/s10064-024-03843-2 ↗
15. Evaluating instability & failure pattern of landslides, Giri valley, Northwest Himalaya, India10.1007/s10064-024-03767-x ↗
16. Geomechanical field survey to identify an unstable rock slope: The Passo della Morte case history (NE Italy)10.1007/s00603-019-01963-w ↗
17. Luo, W., Liu, S., Tao, Z., Wang, H., and Gan, X. (2025). Nonlinear energy consumption analysis of shallow-buried bias tunnel stability with improvement of failure mode. Sci. Rep., 15.10.1038/s41598-025-10755-y ↗
18. Shaking table test study of homogeneous rock slope model under strong earthquake
19. Synergic use of satellite and ground based remote sensing methods for monitoring the San Leo rock cliff (Northern Italy)10.1016/j.geomorph.2016.04.008 ↗
20. Seismically-induced failure mechanisms in massive rock slopes10.1016/j.enggeo.2025.108046 ↗
21. Trajectory analysis and risk evaluation of dangerous rock mass instability of an overhang slope, southwest of China10.1155/2021/7153535 ↗
22. A comparative study on rockfall block motion characteristics using 3-D and 2-D rockfall simulations: A case study from Cappadocia (Mazı, Türkiye)10.1007/s11069-024-06905-6 ↗
23. Study on rockfall trajectory of dangerous rocks based on rocfall numerical simulation: A case study of a section of dangerous rocks in the three gorges reservoir area
24. Application of Rocfall software in engineering design of geological disaster prevention and control of collapse
25. Discussion on prevention and control method of boulder falling in high and steep building slope based on rocfall simulation
26. Rockwall design based on Rocfall
27. Extension of discontinuous deformations analysis method to simulate seismic response of large rock cavern complex10.1061/(ASCE)GM.1943-5622.0000712 ↗
28. Calculation and application of blasting force transport distance based on rocfall numerical simulation
29. Seismic stability analysis of a rock block using the block theory and Newmark method10.1002/nag.2903 ↗
30. Application of rocfall software in the design of dangerous rock collapse
31. A review of geological hazard risk evaluation
32. Risk evaluation and risk management of geological hazards
33. Investigation of the dynamic response pattern and instability mechanism of a bedding rock slope subjected to frequent seismic loads10.1061/IJGNAI.GMENG-8834 ↗
34. On the variability of the site-response parameters of the active rock slope in Brienz/Brinzauls (Switzerland)10.1093/gji/ggae412 ↗
35. Integrating Block Theory and Reliability Methods for Enhanced Stability in Underground Construction: A Case Study
36. Stability assessment of dangerous rock mass of an overhanging slope in Puerdu Town, Southwestern China10.1155/2021/6526417 ↗
37. Review of the main developments in the analytic hierarchy process
38. A scaling method for priorities in hierarchical structures10.1016/0022-2496(77)90033-5 ↗
39. 3D geological suitability evaluation for underground space based on the AHP-cloud model10.1016/j.undsp.2022.03.006 ↗
40. Liu, Y., Ouyang, Z., Yi, H., and Qin, H. (2023). Study of the multilevel fuzzy comprehensive evaluation of rock burst risk. Sustainability, 15.10.3390/su151713176 ↗
41. Zhang, R., Tian, D., Wang, H., Kang, X., Wang, G., and Xu, L. (2023). Risk assessment of compound dynamic disaster based on AHP-EWM. Appl. Sci., 13.10.3390/app131810137 ↗
42. Research on dynamic fuzzy prediction method for surrounding rock stability of mountain tunnels throughout the construction period10.1016/j.tust.2025.106390 ↗
43. Liu, X., Lang, Q., Zhang, J., Zhang, Y., Yu, C., Jin, Q., Liu, Y., and Liu, Z.W.P. (2025). Dynamic failure mechanisms and hazard evaluation of rock collapse induced by extreme rainfall in Changbai County highways. Sci. Rep., 15.10.1038/s41598-025-94756-x ↗
44. 1-g shaking table tests of precast horseshoe segmental tunnel: Experimental design, dynamic properties, deformation mode and damage pattern10.1016/j.tust.2021.103976 ↗
45. 1 g Shaking table test of segmental tunnel in sand under near-fault motions10.1016/j.tust.2021.104080 ↗
46. Effect of frequency on seismic response of reinforced soil slopes in shaking table tests10.1016/j.geotexmem.2012.10.004 ↗
47. Seismic amplification of the anti-dip rock slope and deformation characteristics: A large-scale shaking table test10.1016/j.soildyn.2017.09.010 ↗
48. Experimental study on dynamic characteristics and dynamic responses of accumulation slopes under frequent microseisms10.1007/s12517-020-05781-1 ↗
49. Shaking table tests on polymeric-strip reinforced-soil walls adjacent to a rock slope10.1016/j.geotexmem.2020.12.005 ↗
50. Shaking table model test to determine dynamic response characteristics and failure modes of steep bedding rock slope10.1007/s00603-022-02822-x ↗
51. Identification of co-seismic groundmotion due to fracturing and impact of the Tsaoling landslide, Taiwan10.1016/j.enggeo.2015.07.013 ↗
52. The Hoek–Brown failure criterion and GSI–2018 edition10.1016/j.jrmge.2018.08.001 ↗
53. Jaeger, J.C., Cook, N.G.W., and Zimmerman, R. (2009). Fundamentals of Rock Mechanics, John Wiley & Sons.
54. Scale effect on the shear behaviour of rock joints based on a numerical study10.1016/j.enggeo.2014.07.018 ↗
55. Block theory and its application10.1680/geot.1995.45.3.383 ↗
56. Sewnun, D., Joughin, W.C., Armstrong, R., and Cooper, A. (2017, January 3–5). Keyblock stability analysis of longhole stopes. Proceedings of the ISRM AfriRock-Rock Mechanics for Africa, Cape Town, South Africa. ISRM-AFRIROCK-2017-087.10.17159/2411-9717/2018/v118n3a7 ↗
57. Structurally-controlled instability, damage and slope failure in a porphyry rock mass10.1016/j.tecto.2013.05.033 ↗