Enhancing the Performance of Polypropylene/High-Density Polyethylene Blends by the Use of a Compatibilizer and Montmorillonite Nanoparticles
Source abstract
Abstract
Nanocomposites composed of compatibilized polyolefin blends and organically modified montmorillonite (OMMT) nanoparticles were produced through melt mixing using a twin-screw extruder. High-density polyethylene (HDPE) and polypropylene (PP) blends were compatibilized with maleic anhydride-grafted PE compatibilizer (COMP). Blends with a 10/25 (w/w) HDPE/PP content were prepared and were reinforced with 1, 2, and 3 phr OMMT. Characterization of nanocomposites was performed using X-ray diffraction (XRD), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Tensile Testing, and Melt Flow Index (MFI) measurements. Preparation of polyolefin blend/OMMT nanocomposites with a twin-screw extruder was successful at low clay levels (1 phr). These nanocomposites presented increased onset temperature of thermal degradation, crystallinity, and stiffness, whereas their MFI values were lower than those of the pure matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Polymer Technology, School of Chemical Engineering, National Technical University of Athens, Zographou, 15780 Athens, Greece
References (29)
Show source-provided references
1. Review Nanocomposites based on polyolefins and functional thermoplastic materials10.1002/pi.2415 ↗
2. Influence of clay exfoliation on the physical properties of montmorillonite/polyethylene composites10.1016/S0032-3861(02)00403-2 ↗
3. Preparation and characterization of PE and PE-g-MAH/montmorillonite nanocomposites10.1016/j.eurpolymj.2004.07.009 ↗
4. Crystallization behavior and properties of exfoliated isotactic polypropylene/organoclay nanocomposites10.1002/adv.20036 ↗
5. Effect of crystallization on intercalation of clay-polyolefin nanocomposites and their performance10.1002/pen.20567 ↗
6. Polyethylene and polypropylene nanocomposites based on a three component oligomerically-mofified clay10.1016/j.polymdegradstab.2005.02.004 ↗
7. Ultrahigh molecular weight polyethylene/polypropylene/organo-montmorillonite nanocomposites: Phase morphology, rheological, and mechanical properties10.1002/app.26913 ↗
8. Effect of different modified clays on the thermal and physical properties of polypropylene-montmorillonite nanocomposites10.1016/j.matlet.2006.02.006 ↗
9. Thermal behaviour of compatibilised polypropylene nanocomposite: Effect of processing conditions10.1016/j.polymdegradstab.2005.05.018 ↗
10. Polyolefin-based nanocomposite: The effect of organoclay modifier10.1002/polb.21604 ↗
11. Effects of Two different maelic anhydride-modified adhesion promoters (PP-g-MA) on the structure and Mechanical properties of nanofilled polyolefins10.1002/app.30394 ↗
12. Characterization of PP/HDPE blend-based nanocomposites using different maleated polyolefins as compatibilizers10.1016/j.polymertesting.2010.01.004 ↗
13. Structure–property relationship in PP/LDPE blend composites: The role of nanoclay localization10.1002/app.46193 ↗
14. Rigail-Cedeño, A., Diaz-Barrios, A., Alban, B., Caceres, J., Pilataxi, J., Molina, V., and Lazo, M. (2020). The effect of Olefin Block Copolymer and Organoclays in Recycled HPE/PP nanocomposites. AIP Conf. Proc., 2205.10.1063/1.5142988 ↗
15. Jeevan, K.P., and Prasad, R.K. (2025). Influence of nanoclay reinforcement on thermal and mechanical properties of high-density polyethylene and polypropylene blends. Bull. Mater. Sci., 48.10.1007/s12034-025-03433-2 ↗
16. Effect of compatibilizing agents on the physical properties of iPP/HDPE organoclay blends10.1515/polyeng-2013-0048 ↗
17. Su, B., Zhou, Y.-G., and Wu, H.-H. (2017). Influence of mechanical properties of polypropylene/low-density polyethylene nanocomposites: Compatibility and crystallization. Nanomat. Nanotechnol., 7.10.1177/1847980417715929 ↗
18. Effect of Olefin-based Compatibilizers on the Formation of Cocontinuous Structure in Immiscible HDPE/iPP blends10.1007/s10118-020-2433-7 ↗
19. Tal, A., and Naveh, N. (2024). Compatibilization of Post-Consumer Recycled Polypropylene/Polyethylene Binary Blends. Polym. Adv. Technol., 35.10.1002/pat.6645 ↗
20. Ajmal, M., and Qaiser, A.A. (2025). Effect of Various Compatibilizer Systems on the Upcycling of Comingled Plastic Waste Through in situ Reactive Compatibilization Technique. J. Appl. Polym. Sci., 142.10.1002/app.57357 ↗
21. Review on modification strategies of polyethylene/polypropylene immiscible thermoplastic polymer blends for enhancing their mechanical behavior10.1177/0095244318783806 ↗
22. Zhan, K., Elder, T., and Peng, Y. (2025). Enhancing Polyoropylene/Polyethylene Blend Performance Through Compatibilization for A sustainable Future: A Mini Review Focusing on Establishing Bio-Derived Filler Based Hybrid Compatibilizer System. Macromol. Rapid Commun., 46.10.1002/marc.202400724 ↗
23. Salehiyan, R., El-Samak, A.A., Kamkar, M., Erfanian, E., Hodge, S.A., Sundararaj, U., and McNally, T. (2024). Unveiling the Significance of Graphene Nanoplatelet (GNP) Localization in Tuning the Performance of PP/HDPE Blends. Materials, 17.10.3390/ma17225673 ↗
24. Triantou, M., Gavriel, M., and Tarantili, P.A. (2023). Effect of Compatibilizer and Organoclay Reinforcement on Morphology and Properties of Styrene Copolymer Blends. J. Compos. Sci., 7.10.3390/jcs7010036 ↗
25. Surface free energy of the chain-folding crystal faces of ethylene-butene random copolymers10.1016/0032-3861(93)90619-L ↗
26. Isotacticity effect on crystallization and melting in polypropylene fractions: 1. Crystalline structures and thermodynamic property changes10.1016/0032-3861(91)90477-Z ↗
27. Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle10.1016/j.polymer.2003.10.100 ↗
28. Elastic Properties of a Single Lamella of Montmorillonite by Molecular Dynamics Simulation10.1021/jp0302818 ↗
29. Reinforcing efficiency of nanoparticles: A simple comparison for polymer nanocomposites10.1016/j.compscitech.2007.10.033 ↗