Bulk Electrical Resistivity as an Indicator of the Durability of Sustainable Concrete: Influence of Pozzolanic Admixtures
Source abstract
Abstract
Premature deterioration of concrete structures in coastal areas requires a careful evaluation based on durability criteria. Electrical Resistivity (ER) serves as a valuable indicator of concrete durability, as it reflects how easily aggressive agents can penetrate its pores. This testing method offers several advantages; it is non-destructive, rapid, and more cost-effective than the chloride permeability test (RCPT). Furthermore, durable concrete typically necessitates larger quantities of cement, which contradicts the goals of sustainable concrete development. Thus, a significant challenge is to create concrete that is both durable and sustainable. This research explores the effects of pozzolanic additives, specifically Volcanic Ash (VA) and Sugarcane Bagasse Ash (SCBA), on the electrical resistivity of eco-friendly concretes exposed to the coastal conditions of the Gulf of Mexico. The electrical resistivity (ER) was measured at intervals of 3, 7, 14, 21, 28, 45, 56, 90, and 180 days across 180 cylinders, each with dimensions of 10 cm × 20 cm. The sustainability of the concrete was evaluated based on its energy efficiency. Three types of mixtures were developed using the ACI 211.1 method, maintaining a water-to-cement (w/c) ratio of 0.57 with CPC 30 R RS cement and incorporating various additions: (1) varying percentages of VA (2.5%, 5%, and 7.5%), (2) SCBA at rates of 5%, 10%, and 15%, and (3) ternary mixtures featuring VA-SCBA ratios of 1:1, 1:2, and 1:3. The findings indicated an increase in ER of up to 37% and a reduction in CO2 emissions ranging from 4.2% to 16.8% when compared to the control mixture, highlighting its potential for application in structures situated in aggressive environments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Smart Materials for Construction · Concrete and Cement Materials Research · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Postgraduate Department, Faculty of Engineering, Construction and Habitat, Universidad Veracruzana, Bv. Adolfo Ruiz Cortinez 455, Costa Verde Boca del Río, Veracruz 94294, Mexico
Drilling Fluids Laboratory, Exploration and Production Technologies Center, Mexican Petroleum Institute, Camino de Terracería No. 800, San José Novillero, Boca del Rio, Veracruz 94286, Mexico
Department of Civil Engineering, National Technology of Mexico/ITSM, Km. 1.8 Carretera a la Loma del Cojolite, Misantla, Veracruz 93821, Mexico
References (100+)
Show source-provided references
1. Matallana, R. (2019). Concrete. Fundamentals and New Technologies, Constructora Concreto & Corona. [1st ed.].
2. Spanish Institute of Cement and its Applications (IECA) (2013). Technical Guide: Concrete in Marine Environment, IECA. [1st ed.].
3. Garcés, P., Climent, L., and Zornoza, G. (2008). Corrosion of Reinforcement in Reinforced Concrete Structures, Club Americano. [1st ed.].
4. Deterioration of concrete structures in the environment of the middle east
5. Rivera, G. (2005). Simple Concrete, Digital Version. [1st ed.]. Available online: https://www.academia.edu/13569512/CONCRETO_SIMPLE.
6. Mehta, K., and Monteiro, P. (2006). Concrete, Microstructure, Properties and Materials, McGraw Hill. [3rd ed.].
7. Electrical resistivity of concrete. Concepts, applications, and measurement techniques
8. (2018). Building Industry- Durability- General Standard of Reinforced Concrete Structures Durability- Criteria and Specifications (Standard No. NMX-C-530-ONNCCE). Available online: https://www.onncce.org.mx/tienda?view=item&mc=65&mi=872.
9. Recent advances in the concrete industry to reduce its carbon dioxide emissions10.1016/j.envc.2020.100004 ↗
10. Global CO2 emissions from cement production, 1928–201810.5194/essd-11-1675-2019 ↗
11. Strength and microstructure of CO2 cured low-calcium Clinker10.1016/j.conbuildmat.2018.08.134 ↗
12. International Energy Agency (IEA) (2025, July 08). Technology Roadmap. Low-Carbon Transition in the Cement Industry, Available online: https://www.iea.org/reports/technology-roadmap-low-carbon-transition-in-the-cement-industry.
13. European Cement Association (CEMBOREAU) (2025, July 10). Activity Report. Available online: https://cembureau.eu/media/dnbf4xzc/activity-report-2023-for-web.pdf.
14. Computation of the environmental performance of ready-mix concrete for reducing CO2 emissions: A case study in Egypt10.1016/j.egyr.2023.09.125 ↗
15. Global Cement and Concrete Association (GCCA) (2025, July 16). GCCA Roadmap: Towards a Carbon-Neutral Cement and Concrete Industry by 2050. Available online: https://gccassociation.org/concretefuture/wp-content/uploads/2022/10/GCCA-Concrete-Future-Roadmap-Document-AW-2022.pdf.
16. The Potential of Sustainable Materials for Green Building Practices
17. Effect of treated and untreated rice husk ash, palm oil fuel ash, and sugarcane bagasse ash on the mechanical, durability, and microstructure characteristics of blended concrete—A comprehensive review10.1016/j.jobe.2023.107500 ↗
18. Carbon sequestration and storage in concrete: A state-of-the-art review of compositions, methods, and developments10.1016/j.jcou.2023.102443 ↗
19. The reaction of fly ash in concrete a critical examination10.1016/0008-8846(89)90088-4 ↗
20. Role of the filler on Portland cement hydration at early ages10.1016/j.conbuildmat.2011.07.021 ↗
21. Gálvez, A. (2000). Advantages of Pozzolans in the Degradation Reactions of Concrete. [Bachelor’s Thesis, University of Sonora].
22. Ríos, F.J. (2005). Effect of High Fines Content on the Impermeability of Concrete. [Master’s Thesis, Federico Santa María Technical University]. Available online: https://repositorio.usm.cl/handle/11673/12301.
23. Effect of natural pozzolans on porosity and pore connectivity of concrete over time
24. Ecological concrete by partially substitution of cement with Cameroonian corn stover ash10.1016/j.heliyon.2024.e41424 ↗
25. An experimental investigation on mechanical characteristics of steel-fiber-reinforced volcanic concrete10.1016/j.nxmate.2024.100308 ↗
26. Assessing the engineering properties and environmental impact with explainable machine learning analysis of sustainable concrete utilizing waste banana leaf ash as a partial cement replacement10.1016/j.clet.2025.100886 ↗
27. Enhancing concrete strength and durability through incorporation of rice husk ash and high recycled aggregate
28. Engineering characteristics of ultra-high performance concrete containing basil plant ash
29. Evaluation of the optimal concrete mix design with coconut shell ash as a partial cement replacement10.1016/j.conbuildmat.2023.132978 ↗
30. Characterization and investigation of the use of oat husk ash as supplementary cementitious material as partial replacement of Portland cement: Analysis of fresh and hardened properties and environmental assessment10.1016/j.conbuildmat.2022.129762 ↗
31. Influence of cashew leaf ash as partial replacement for cement on the properties of fresh and hardened concrete10.1016/j.clwas.2022.100063 ↗
32. Echeverri, P., and Pérez, A. (2003). Compendium on the Durability of Concrete. [Bachelor’s Thesis, University of Antioquia]. Available online: https://repository.eia.edu.co/server/api/core/bitstreams/14e69a67-160f-4f13-a53c-a5aa479d9d30/content.
33. (2022). Standard Test Method for Electrical Indication of the Ability of Concrete to Resist Chloride Ion Penetration (Standard No. ASTM C 1202-22). Available online: https://www.astm.org/c1202-22.html.
34. Electrical Resistivity as Durability Index for Concrete Structures
35. Test methods for on-site measurement of resistivity of concrete—A RILEM TC-154 technical recommendation10.1016/S0950-0618(00)00061-1 ↗
36. The Atmospheric Corrosiveness in Veracruz, Mexico
37. Parra, A. (1999). Research on Atmospheric Corrosion in the Gulf of Mexico. [Ph.D. Thesis, National Autonomous University of Mexico (UNAM)]. Available online: https://repositorio.unam.mx/contenidos/98950.
38. Hernández, L.P. (2020). Development of an Environmental Corrosivity Map in Various Locations in the Mexican Republic Based on the ISO 9223 Standard. [Master’s Thesis, Center for Research in Advanced Materials (CIMAV)]. Available online: https://cimav.repositorioinstitucional.mx/jspui/handle/1004/2632.
39. (2012). Corrosion of Metals and Alloys—Corrosivity of Atmospheres—Classification, Determination and Estimation (Standard No. ISO 9223).
40. Callister, W., and Retwisch, D. (2016). Materials Science and Engineering, Reverté. [2nd ed.].
41. Andrade, C., and Climent, M.A. (2025, August 03). Technical Recommendation on the Measurement of Electrical Resistivity in test Pieces, J. ALCONPAT. Available online: https://alconpat.org/assets/docs/recomendaciones_tecnicas/04_RT.pdf.
42. Askeland, D., and Wright, W. (2016). Materials Science and Engineering, Cengage Learning Publishing. [7th ed.].
43. Electrical resistivity measurement, piezoresistivity behavior and compressive strength of concrete: A comprehensive review10.1016/j.mtcomm.2023.106573 ↗
44. Influence of recycled slag aggregates on the conductivity and strain sensing capacity of carbon fiber reinforced cement mortars10.1016/j.conbuildmat.2018.06.218 ↗
45. Electrical resistivity of cement-based materials through ion conduction mechanisms for enhancing resilient infrastructures10.1016/j.cemconcomp.2024.105792 ↗
46. Test methods for on-site measurement of resistivity of concrete10.1007/BF02480599 ↗
47. Tuutti, K. (1982). Corrosion of Steel in Concrete. [Ph.D. Thesis, Lund University]. Available online: https://lucris.lub.lu.se/ws/files/4709458/3173290.pdf.
48. Electrical Resistivity of Concrete for Durability Evaluation: A Review10.1155/2017/8453095 ↗
49. Factors that Influence Electrical Resistivity Measurements in Cementitious Systems10.3141/2342-11 ↗
50. Gjørv, O.E., Vennesland, Ø.E., and El-Busaidy, A. (1977, January 2–5). Electrical resistivity of concrete in the oceans. Proceedings of the 9th Annual Offshore Technology Conference, Houston, TX, USA.10.4043/2803-MS ↗
51. Electrical resistivity as a parameter for controlling concrete and its durability
52. (2019). Electrical Resistivity of Hydraulic Concrete—Specifications and Test Methods (Standard No. NMX-C-514-ONNCCE). Available online: https://www.onncce.org.mx/tienda?view=item&mc=65&mi=893.
53. (2024). Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete (Standard No. ASTM C 1876-24). Available online: https://www.astm.org/c1876-19.html.
54. (2022). Standard Test Method for Surface Resistivity Indicating the Ability of Concrete to Resist Penetration of Chloride Ions (Standard No. AASHTO T 358).
55. (2023). Standard Test Method for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Strength Test (Standard No. AASHTO TP 119).
56. (2020). Standard Test Method for Slump of Hydraulic Cement Concrete (Standard No. ASTM C 143-20). Available online: https://www.astm.org/c0143_c0143m-20.html.
57. (2024). Standard Test Method for Unit Weight, Yield, and Air Content of Concrete (Standard No. ASTM C 138-24). Available online: https://store.astm.org/c0138_c0138m-24a.html.
58. (2023). Standard Test Method for Temperature of Freshly Mixed Hydraulic Cement Concrete (Standard No. ASTM C 1064-23). Available online: https://store.astm.org/c1064_c1064m-23.html.
59. (2023). Standard Test Methods for Compressive Strength of Concrete Cylinders (Standard No. ASTM C 39-23). Available online: https://www.astm.org/c0039_c0039m-23.html.
60. (2023). Standard Test Method for Bulk Density (Unit Weight) and Void Index of Aggregates (Standard No. ASTM C 29-23). Available online: https://www.astm.org/c0029_c0029m-23.html.
61. (2022). Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate (Standard No. ASTM C 128-22). Available online: https://store-astm-org.translate.goog/c0128-22.html?_x_tr_sl=en&_x_tr_tl=es&_x_tr_hl=es&_x_tr_pto=tc.
62. (2022). Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Standard No. ASTM C 127-24). Available online: https://www.astm.org/c0127-24.html.
63. (2019). Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates (Standard No. ASTM C 136-19). Available online: https://www.astm.org/c0136_c0136m-19.html.
64. (2023). Standard Specification for Aggregates in Concrete (Standard No. ASTM C 33-23). Available online: https://www.astm.org/c0033_c0033m-23.html.
65. (2023). Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Standard No. ASTM C 618-25). Available online: https://store.astm.org/c0618-25a.html.
66. (2017). Building Industry – Hydraulic Cements - Specifications and Testing Methods (Standard No. NMX-C-414-ONNCCE). Available online: https://onncce.org.mx/tienda?view=item&mc=65&mi=258.
67. (2022). Standard Specifications for Portland Cement (Standard No. ASTM C 150-22). Available online: https://www.astm.org/c0150_c0150m-22.html.
68. Effect of calcination temperature on the pozzolanic activity of sugar cane bagasse ash10.1016/j.conbuildmat.2009.02.013 ↗
69. IMCYC (2013). Proportioning of Normal, Heavy and Massive Concrete Mixtures ACI 211.1, IMCYC Publishing.
70. (2022). Standard Specification for Mixing Water Used in the Production of Hydraulic Concrete (Standard No. ASTM C 1602-22). Available online: https://www.astm.org/c1602_c1602m-22.html.
71. (2004). Water for Concrete—Specifications (Standard No. NMX-C-122-ONNCCE). Available online: https://onncce.org.mx/tienda?view=item&mc=65&mi=917.
72. (2015). Standard Specification for Molds for Forming Concrete Test Cylinders Vertically (Standard No. ASTM C 470-15). Available online: https://store.astm.org/c0470_c0470m-15.html.
73. (2015). Standard Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory (Standard No. ASTM C 192-25). Available online: https://store.astm.org/c0192_c0192m-25.html.
74. (2023). Standard Practice for Capping Cylindrical Concrete Specimens (Standard No. ASTM C 617-23). Available online: https://www.astm.org/c0617_c0617m-23.html.
75. Determination of depassivation in reinforcing steel bars in seawater pore solution by means of electrochemical techniques
76. Effect of the marine environment on reinforced concrete durability in Iberoamerican countries: DURACON project/CYTED10.1016/j.corsci.2007.02.009 ↗
77. 10-year natural carbonation data of concretes with limestone, fly ash, volcanic ash, and slag and exposed to tropical climate in India10.1016/j.dib.2024.111006 ↗
78. (2016). Determination of carbonation depth in hydraulic concrete (Standard No. NMX-C-515). Available online: https://onncce.org.mx/tienda?view=item&mc=65&mi=156.
79. (2021). Standard Test Method for Density, Absorption, and Voids in Hardened Concrete (Standard No. ASTM C 642-21). Available online: https://store.astm.org/c0642-21.html.
80. Sakib, N., Hasan, R., Mutalib, A.A., Jamil, M., Raman, S.N., and Kaish, A.B.M.A. (2023). Utilization of Sugar Mill Waste Ash as Pozzolanic Material in Structural Mortar. Minerals, 13.10.3390/min13030324 ↗
81. Ghanim, A.A.J., Rahman, F.U., Adil, W., Zeyad, A.M., and Magbool, H.M. (2023). Experimental investigation of industrial wastes in concrete: Mechanical and microstructural evaluation of pumice powder and Fly Ash in concrete. Case Stud.Constr.Mater., 18.10.1016/j.cscm.2023.e01999 ↗
82. The effect of content and fineness of natural pozzolana on the rheological, mechanical and durability properties of self-compacting morta10.1016/j.jobe.2021.103276 ↗
83. Efficiency of Portland-pozzolana cements: Water demand, chemical reactivity and environmental impact10.1016/j.conbuildmat.2020.118546 ↗
84. Aranguren, C.E.C., and Ballesteros, V.P.P. (2010). Effects of Settlement Loss on the Strength of 3000 psi Concrete. [Bachelor’s Thesis, Nueva Granada Military University]. Available online: https://repository.unimilitar.edu.co/server/api/core/bitstreams/e9092d57-90ff-4c79-9b8d-ef800118e0e4/content.
85. Sugarcane bagasse ash as supplementary cementitious material in concrete—A review
86. Blended cement using volcanic ash and pumice10.1016/S0008-8846(03)00127-3 ↗
87. Influence of coal bottom ash as fine aggregate on fresh properties of concrete10.1016/j.conbuildmat.2008.05.003 ↗
88. Internal curing in high-performance concrete—A new paradigm
89. Impact of Embodied Energy on materials/buildings with partial replacement of ordinary Portland Cement (OPC) by natural Pozzolanic Volcanic Ash10.1016/j.jclepro.2017.12.234 ↗
90. Effect of silica fume inclusion on the strength, shrinkage and durability characteristics of natural pozzolan-based cement concrete
91. Correlations between water absorption, electrical resistivity and compressive strength of concrete with different pozzolan contents10.21041/ra.v9i2.335 ↗
92. Development and evaluation of basaltic volcanic ash based high performance concrete incorporating metakaolin, micro and nano-silica10.1016/j.dibe.2024.100330 ↗
93. Resistivity Tests for Concrete—Recent Field Experience
94. Use of Supplementary Cementitious Materials (SCM) in Reinforced Concrete Systems—Benefits and Limitations10.21041/ra.v10i2.477 ↗
95. Trocónis, O., Romero, A., Andrade, C., Helene, P., and Díaz, I. (2000). DURAR Inspection Manual, SPAN.
96. Assessing of water absorption on concrete composites containing fly ash up to 30% in regards to structures completely immersed in water
97. Strength, permeability and microstructure of self-compacting concrete containing rice husk ash10.1016/j.biosystemseng.2014.12.005 ↗
98. Green concrete partially comprised of rice husk ash as a supplementary cementitious material—A comprehensive review10.1016/j.rser.2017.10.081 ↗
99. Kosmatka, S.H., Kerkhoff, B., Panarese, W.C., and Tanesi, J. (2004). Design and Control of Concrete Mixtures, Portland Cement Association. [1st ed.].
100. Li, X., Wang, C., Kassem, M.A., Wu, S.-Y., and Wei, T.-B. (2022). Case Study on Carbon Footprint Life-Cycle Assessment for Construction Delivery Stage in China. Sustainability, 14.10.3390/su14095180 ↗