journal article·2025-10-10Open access

An Asymmetric SiC Power Module Directly Integrated with Vapor Chamber for Thermal Balancing in MMC

Binyu Wang, Xiwei Zhou, Yawen Zhu, Mengfei Qi, Hai Lin, Bobin Yao, Shaohua Huang, Xuetao Wang, Qisheng Wu, Weiyu Liu

Applied Sciences· Volume 15· Issue 20

Abstract

Power modules in silicon carbide (SiC)-based modular multilevel converters (MMCs) suffer from notably severe thermal imbalance and localized overheating. This paper puts forward an asymmetric SiC power module with direct integration of a vapor chamber (VC), designed to balance the thermal distribution inside MMC SMs. Specifically, the chips on the lower side of the HBSM are soldered onto a VC, which is additionally mounted on the direct bonding copper (DBC). Endowed with merits such as favorable temperature uniformity, exceptional thermal conductivity, compact size, flexible design, high integration level, and reasonable cost, the VC serves as an outstanding heat diffuser significantly expanding the effective thermal conduction area and reducing thermal resistance. Moreover, in this structure, the VC also functions as a conductor for device current. Finite element method (FEM) simulation results reveal that the proposed structure can notably reduce the hotspot temperature (from 109 °C to 71.8 °C), the maximum temperature difference among chips (from 45 °C to 13.89 °C), and the low-frequency temperature swing (TSL) (from 68 °C to 38 °C). Consequently, the issues of localized overheating and thermal imbalance in SiC-MMC SMs are effectively addressed. Lifetime analysis further indicates that the proposed structure can reduce the annual damage rate of the chip solder layer by 92.6%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · HVDC Systems and Fault Protection · Thermal Analysis in Power Transmission

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Electronics and Control Engineering, Chang’an University, Xi’an 710064, China

School of Automobile, Chang’an University, Xi’an 710064, China

School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China

Funding

Fundamental Research Funds for the Central Universities, Chang’an University · National Natural Science Foundation of China

References (53)

Show source-provided references
1. Alyami, H., and Mohamed, Y. (May, January 30). Review and development of MMC employed in VSC-HVDC systems. Proceedings of the 2017 IEEE 30th Canadian Conference on Electrical and Computer Engineering (CCECE), Windsor, ON, Canada.10.1109/CCECE.2017.7946676 ↗
2. Song, S., Liu, J., Ouyang, S., and Chen, X. (2018, January 4–8). An improved high-frequency common-mode voltage injection method in modular multilevel converter in motor drive application. Proceedings of the 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), San Antonio, TX, USA.10.1109/APEC.2018.8341368 ↗
3. Reliability-Oriented Design of Modular Multilevel Converters for Medium-Voltage STATCOM10.1109/TIE.2019.2937050 ↗
4. Efficiency Evaluation of the Modular Multilevel Converter Based on Si and SiC Switching Devices for Medium/High-Voltage Applications10.1109/TED.2014.2375875 ↗
5. Research on Capacitor-Switching Semi-Full-Bridge Submodule of Modular Multilevel Converter Using Si-IGBT and SiC-MOSFET10.1109/JESTPE.2020.3034451 ↗
6. Flexible PCB-Based 3-D Integrated SiC Half-Bridge Power Module with Three-Sided Cooling Using Ultralow Inductive Hybrid Packaging Structure10.1109/TPEL.2018.2866404 ↗
7. A Hybrid Modular Multilevel Converter Comprising SiC MOSFET and Si IGBT with Its Specialized Modulation and Voltage Balancing Scheme10.1109/TIE.2021.3118372 ↗
8. A Novel Voltage Balancing Control With dv/dt Reduction for 10-kV SiC MOSFET-Based Medium Voltage Modular Multilevel Converter10.1109/TPEL.2020.2987962 ↗
9. 7-kV 1-MVA SiC-Based Modular Multilevel Converter Prototype for Medium-Voltage Electric Machine Drives10.1109/TPEL.2020.2978657 ↗
10. A SiC MOSFET and Si IGBT Hybrid Modular Multilevel Converter with Specialized Modulation Scheme10.1109/TPEL.2020.2993366 ↗
11. Thermal Performances and Annual Damages Comparison of MMC Using Reverse Conducting IGBT and Conventional IGBT Module10.1109/TPEL.2021.3062620 ↗
12. Direct Integration of Optimized Phase-change Heat Spreaders into SiC Power Module for Thermal Performance Improvements Under High Heat Flux10.1109/TPEL.2021.3125329 ↗
13. Comparison of the Heat Transfer Capabilities of Conventional Single- and Two-Phase Cooling Systems for an Electric Vehicle IGBT Power Module10.1109/TPEL.2018.2862943 ↗
14. Failure and Reliability Analysis of a SiC Power Module Based on Stress Comparison to a Si Device10.1109/TDMR.2017.2766692 ↗
15. Lifetime Estimation of MMC for Offshore Wind Power HVDC Application10.1109/JESTPE.2015.2477109 ↗
16. Lifetime estimation of IGBT modules for MMC-HVDC application10.1016/j.microrel.2018.01.009 ↗
17. Wang, B., Wang, J., Ma, D., Wang, L., Yang, F., Li, X., and Tan, Y. (2019, January 1–5). A Lifetime Estimation Method of MMC Submodules based on the Combination of FEA and Physical Lifetime Model. Proceedings of the 2019 10th International Conference on Power Electronics and ECCE Asia (ICPE 2019—ECCE Asia), Busan, Republic of Korea.10.23919/ICPE2019-ECCEAsia42246.2019.8796932 ↗
18. Farias, J.V.M., Cupertino, A.F., Ferreira, V.N., Seleme, S.I., Pereira, H.A., and Teodorescu, R. (2017, January 19–22). Design and lifetime analysis of a DSCC-MMC STATCOM. Proceedings of the 2017 Brazilian Power Electronics Conference (COBEP), Juiz de Fora, Brazil.10.1109/COBEP.2017.8257312 ↗
19. On lifetime evaluation of medium-voltage drives based on modular multilevel converter10.1049/iet-epa.2018.5897 ↗
20. Ye, Y., Lutz, J., Zeng, G., Alvarez, R., and Correa, P. (2017, January 16–18). Thermal Calculation Methodology for Lifetime Estimation of Semiconductor Devices in MMC Application. Proceedings of the PCIM Europe 2017; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nuremberg, Germany.
21. Zhang, Y., Wang, H., Wang, Z., Yang, Y., and Blaabjerg, F. (November, January 29). The impact of mission profile models on the predicted lifetime of IGBT modules in the modular multilevel converter. Proceedings of the IECON 2017—43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China.10.1109/IECON.2017.8217399 ↗
22. Zhang, Y., Wang, H., Wang, Z., Yang, Y., and Blaabjerg, F. (2017, January 1–5). Impact of lifetime model selections on the reliability prediction of IGBT modules in modular multilevel converters. Proceedings of the 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, USA.10.1109/ECCE.2017.8096728 ↗
23. Mission Profile-Based System-Level Reliability Prediction Method for Modular Multilevel Converters10.1109/TPEL.2019.2957826 ↗
24. Khanzadeh, B., Tang, C., and Thiringer, T. (2020, January 10–12). A Study on the Lifetime of Q2L-MMC-DAB’s Switches for Wind Turbine Applications. Proceedings of the 2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Monte-Carlo, Monaco.10.1109/EVER48776.2020.9243073 ↗
25. Fu, W., and Wang, L. (2020, January 6–9). Reliability Evaluation for the Press-pack Submodule in MMC-HVDC Application. Proceedings of the 2020 4th International Conference on HVDC (HVDC), Xi’an, China.10.1109/HVDC50696.2020.9292680 ↗
26. Guo, W., Liu, Z., Ma, D., and Wang, L. (2020, January 23–25). The Reliability of Press-pack IGBT in MMC Based on Electro-Thermo-Mechanical Simulation. Proceedings of the 2020 17th China International Forum on Solid State Lighting & 2020 International Forum on Wide Bandgap Semiconductors China (SSLChina: IFWS), Shenzhen, China.10.1109/SSLChinaIFWS51786.2020.9308685 ↗
27. Active Thermal Control for Hybrid Modular Multilevel Converter Under Overmodulation Operation10.1109/TPEL.2019.2936010 ↗
28. Yang, Q., and Saeedifard, M. (November, January 29). Active thermal loading control of the modular multilevel converter by a multi-objective optimization method. Proceedings of the IECON 2017—43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China.10.1109/IECON.2017.8216772 ↗
29. Device-Level Loss Balancing Control for Modular Multilevel Converters10.1109/TPEL.2020.3020973 ↗
30. Merlin, M.M.C., and Mitcheson, P.D. (2016, January 27–30). Active power losses distribution methods for the modular multilevel converter. Proceedings of the 2016 IEEE 17th Workshop on Control and Modeling for Power Electronics (COMPEL), Trondheim, Norway.10.1109/COMPEL.2016.7556754 ↗
31. Yin, T., Lin, L., and Xu, C. (2020, January 7–11). Adaptive Thermal Control for MOSFET-Based Modular Multilevel Converter. Proceedings of the 2020 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe), Lyon, France.10.23919/EPE20ECCEEurope43536.2020.9215808 ↗
32. Bakhshizadeh, M.K., Ma, K., Loh, P.C., and Blaabjerg, F. (2015, January 15–19). Indirect thermal control for improved reliability of Modular Multilevel Converter by utilizing circulating current. Proceedings of the 2015 IEEE Applied Power Electronics Conference and Exposition (APEC), Charlotte, NC, USA.10.1109/APEC.2015.7104649 ↗
33. Thermal Optimization Strategy Based on Second-Order Harmonic Circulating Current Injection for MMCs10.1109/ACCESS.2021.3084998 ↗
34. Harmonic circulating current injection based power losses optimization control of bottom switch/diode for modular multilevel converters
35. Methodology for active thermal cycle reduction of power electronic modules10.1109/TPEL.2018.2882184 ↗
36. Zhang, J., Du, X., Zeng, C., Sun, P., and Tai, H. (2017, January 26–30). A lifetime extension strategy for power devices in the wind power converters based on the distribution characteristics of consumed lifetime. Proceedings of the 2017 IEEE Applied Power Electronics Conference and Exposition (APEC), Tampa, FL, USA.10.1109/APEC.2017.7930780 ↗
37. Liquid Metal Magnetohydrodynamic Pump for Junction Temperature Control of Power Modules10.1109/TPEL.2018.2806622 ↗
38. Observer based dynamic adaptive cooling system for power modules10.1016/j.microrel.2016.01.020 ↗
39. Wang, X., Wang, Y., and Castellazzi, A. (2015, January 10–14). Reduced active and passive thermal cycling degradation by dynamic active cooling of power modules. Proceedings of the 2015 IEEE 27th International Symposium on Power Semiconductor Devices & IC’s (ISPSD), Hong Kong, China.10.1109/ISPSD.2015.7123451 ↗
40. Castellazzi, A., Onifade, M., Wang, X., and Zanchetta, P. (2012, January 10–13). State-space modeling of power assemblies for advanced thermal management solutions. Proceedings of the 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics (COMPEL), Kyoto, Japan.10.1109/COMPEL.2012.6251774 ↗
41. Air-Cooling System Optimization for IGBT Modules in MMC Using Embedded O-Shaped Heat Pipes10.1109/JESTPE.2021.3054918 ↗
42. Direct Phase-Change Cooling of Vapor Chamber Integrated With IGBT Power Electronic Module for Automotive Application10.1109/TPEL.2020.3031372 ↗
43. An Evaluation on Thermal Performance Improvements for SiC Power Module Integrated with Vapor Chamber in MMC10.1109/JESTPE.2021.3138744 ↗
44. Optimization and Analysis of Thermal Conductivity Structure for IGBT Module Embedded with the Vapor Chamber10.1109/TCPMT.2023.3290086 ↗
45. Avenas, Y., Gillot, C., Bricard, A., and Schaeffer, C. (2002, January 23–27). On the use of flat heat pipes as thermal spreaders in power electronics cooling. Proceedings of the 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289), Cairns, QLD, Australia.
46. A Method to Balance Dynamic Current of Paralleled SiC MOSFETs With Kelvin Connection Based on Response Surface Model and Nonlinear Optimization10.1109/TPEL.2020.3009008 ↗
47. Lifetime Prediction of IGBT Modules in Suspension Choppers of Medium/Low-Speed Maglev Train Using an Energy-Based Approach10.1109/TPEL.2018.2812732 ↗
48. Prediction of Bond Wire Fatigue of IGBTs in a PV Inverter Under a Long-Term Operation
49. Thermal Loading and Lifetime Estimation for Power Device Considering Mission Profiles in Wind Power Converter10.1109/TPEL.2014.2312335 ↗
50. Selected failure mechanisms of modern power modules10.1016/S0026-2714(02)00042-2 ↗
51. A Comprehensive Review Toward the State-of-the-Art in Failure and Lifetime Predictions of Power Electronic Devices10.1109/TPEL.2018.2860587 ↗
52. A Lifetime Estimation Technique for Voltage Source Inverters10.1109/TPEL.2012.2229472 ↗
53. Cumulative damage in fatigue10.1115/1.4009458 ↗