Surface damage effects on multiaxial fatigue crack behavior in laser powder bed fused 18Ni-300 maraging steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Corrosion behavior of steel parts repaired using additive manufacturing: overview and research perspective10.1016/j.matdes.2025.113769 ↗
2. Comparison of additively manufactured vs. conventional maraging steel in corrosion fatigue performance after various surface treatments10.1016/j.procir.2020.03.003 ↗
3. Effect of powder recycling on powder characteristics and mechanical properties of materials produced by laser powder bed fusion (LPBF): a review
4. Heterogeneous effect of aging temperature on the fatigue life of additively manufactured thin-walled 18Ni300 maraging steel tubular specimen10.1016/j.matdes.2023.112561 ↗
5. Influence of post-processing methods on the fatigue performance of materials produced by selective laser melting (SLM)10.1007/s00170-024-14920-x ↗
6. Fatigue and corrosion fatigue of 18Ni maraging steel
7. Multiscale analysis of corrosion fatigue crack propagation mechanism of high-strength steel in seawater atmospheric environment10.1111/ffe.14600 ↗
8. Review on corrosion performance of laser powder bed fusion printed 316L stainless steel: effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure10.1016/j.matdes.2022.110874 ↗
9. Key role of surface defects in the multiaxial fatigue life of additively manufactured unmachined 18Ni300 maraging steel10.1016/j.ijfatigue.2024.108319 ↗
10. Corrosion properties of powder bed fusion additively manufactured 17-4 PH stainless steel10.5006/2365 ↗
11. Effect of salt concentration on the corrosion behavior of carbon steel in CO2 environment10.5006/1910 ↗
12. Study on corrosion damage mechanisms and fatigue life of corroded steel wires in suspension bridge cable strands
13. Effect of pre-corrosion pits on residual fatigue life for steel
14. Effect of pitting corrosion on fatigue crack initiation and fatigue life10.1016/S0013-7944(98)00101-5 ↗
15. Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM)10.1016/j.matchar.2017.06.029 ↗
16. Corrosion-fatigue performance of 3D-printed (L-PBF) AlSi10Mg10.3390/ma16175964 ↗
17. Effect of pre-corrosion on the fatigue failure of additive manufactured AlSi10Mg alloy10.1007/s11665-021-06225-x ↗
18. Optimum corrosion performance using microstructure design and additive manufacturing process control
19. The pre-corrosion fatigue behavior of 321 steel coated by laser additively manufactured FeCoNiCrMn high entropy alloy10.1016/j.oceaneng.2024.117008 ↗
20. The effect of corrosion on the fatigue crack-growth of 17-4 PH stainless steel specimens made by selective laser melting10.1016/j.ijfatigue.2025.109059 ↗
21. Effect of surface finishing on the corrosion resistivity of 3D printed M300 steel10.3390/ma17246047 ↗
22. Ferreira DFS, Ferro Rocha AM, Proença CS, Bastos AC, Oliveira FJ, Oliveira JM. A preliminary comparison of the corrosion behaviour of additively and conventionally manufactured 18Ni300 maraging steel for moulds. 8-as conferences corrosion and materials protection, 2022. p. 72–4. https://doi.org/10.34637/5tmz-2d46.
23. Effect of shot peening on corrosion resistance of additive manufactured 17-4PH steel10.2478/msp-2022-0038 ↗
24. Effect of post-heat treatments on the corrosion behaviour of additive manufactured M300 maraging steel10.1177/1478422X251314174 ↗
25. Improvement of corrosion resistance of maraging steel manufactured by selective laser melting through intercritical heat treatment10.5006/3972 ↗
26. Corrosion resistance of 18Ni-300 maraging steel manufactured by LPBF
27. X-ray computed tomography in metal additive manufacturing: a review on prevention, diagnostic, and prediction of failure10.1016/j.tws.2024.112736 ↗
28. Qian · Int J Fatigue · 2022 · 15510.1016/j.ijfatigue.2021.106616 ↗
29. EOS GmbH Electro Optical Systems, Material data sheet, EOS Maraging steel MS1, Available: https://www.eos.info/metal-solutions/metal-materials/data-sheets/mds-eos-maragingsteel-ms1 (accessed March 2, 2025).
30. Damage localisation in fresh cement mortar observed via in situ (timelapse) X-ray μCT imaging10.1016/j.cemconcomp.2024.105736 ↗
31. Analysis of a 3D tetrachiral auxetic lattice under compression: combining experimental and numerical approaches of 4D X-ray microtomography, digital volume correlation, and finite element modeling10.1007/s42247-024-00973-x ↗
32. Full-field deformation characteristics of preserved sandstone via automated 4D X-ray CT procedure
33. Phase-locked X-ray computed tomography for modal analysis of periodically oscillating structures10.1016/j.measurement.2025.119395 ↗
34. Multi-channel control system for in-situ laboratory loading devices
35. Optimisation of radiographic acquisition parameters for direct digital radiography: a systematic review10.1016/j.radi.2020.08.012 ↗
36. The cone-beam algorithm of Feldkamp, Davis, and Kress preserves oblique line integrals10.1118/1.1759828 ↗
37. Correction of the X-ray tube spot movement as a tool for improvementof the micro-tomography quality10.1088/1748-0221/11/01/C01029 ↗
38. Fast continuous in-situ XCT of additively manufactured carbon fiber reinforced tensile test specimens10.14311/APP.2023.42.0022 ↗
39. Pitting corrosion induced on high-strength high carbon steel wire in high alkaline deaerated chloride electrolyte10.1515/ntrev-2022-0060 ↗
40. Research progress on the corrosion mechanism and protection monitoring of metal in power equipment10.3390/coatings15020119 ↗
41. Corrosion behaviour of weathering steel with high content titanium exposed to simulated marine environment10.20964/2018.06.61 ↗
42. Effect of corrosion characteristics on long term aging of austenitic 304 steel10.3390/app9245557 ↗
43. The effect of long-term operation on fatigue and corrosion fatigue crack growth in structural steels10.1016/j.prostr.2023.10.062 ↗
44. The impact of corrosion on the fatigue strength of steel used in bridge structures10.15199/40.2024.1.1 ↗
45. Defect analysis for additively manufactured materials in fatigue from the viewpoint of quality control and statistics of extremes10.1016/j.prostr.2019.12.014 ↗
46. Size effect in fatigue modelling of defective materials: application of the calibrated weakest-link theory10.1016/j.ijfatigue.2022.107213 ↗
47. Fatigue of additive manufactured Ti-6Al-4V , Part II : the relationship between microstructure, material cyclic properties, and component performanc10.1016/j.ijfatigue.2019.105363 ↗
48. A review of critical plane orientations in multiaxial fatigue failure criteria of metallic materials10.1007/s10704-005-1088-2 ↗
49. Microstructure-based intergranular fatigue crack nucleation model: dislocation transmission versus grain boundary cracking10.1016/j.jmps.2023.105233 ↗
50. Defect-Fatigue correlations of post-processed laser powder bed fused metallic alloys: a review
51. Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions10.1016/j.matdes.2021.110084 ↗
52. Multiaxial fatigue of additive manufactured metals10.1051/matecconf/201930001003 ↗
53. Surface roughness effect on multiaxial fatigue behavior of additive manufactured metals and its modeling10.1016/j.tafmec.2019.102260 ↗
54. Impact of surface post-treatments on corrosion resistance in heat-treated laser-powder bed fused Nickel Aluminum Bronze10.1016/j.cirpj.2025.06.010 ↗
55. Fatigue damage evolution and failure mechanism in pre-corroded AlSi10Mg fabricated by laser powder bed fusion10.1016/j.engfracmech.2025.110926 ↗
56. Characterization of surface roughness and subsurface pores and their effect on corrosion in 3D-printed AlSilOMg10.17159/2411-9717/1053/2020 ↗
57. Influence of surface finishing on corrosion behaviour of 3D printed TiAlV alloy10.3390/met10111547 ↗
58. Corrosion fatigue mechanisms and evaluation methods of high-strength steel wires: a state-of-the-art review10.1111/ffe.14311 ↗
59. Effect of corrosion and fatigue on the remaining life of structures and its implication to additive manufacturing
60. The interaction of corrosion fatigue and stress-corrosion cracking in a precipitation-hardened martensitic stainless steel10.1038/s41529-017-0013-2 ↗
61. Fatigue properties of Scalmalloy® processed by laser powder bed fusion in as-built, chemically and conventionally machined surface condition10.1016/j.jmatprotec.2022.117811 ↗
62. Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: a critical distance approach to defect sensitivity10.1016/j.ijfatigue.2018.12.020 ↗
63. Effects of characteristic parameters of corrosion pits on the fatigue life of the steel wires10.1016/j.jcsr.2019.105879 ↗
64. Two fatigue life prediction models based on the critical plane theory and artificial neural networks10.3390/met14080938 ↗
65. Constant/variable amplitude multiaxial notch fatigue of additively manufactured AISI 316L10.1016/j.ijfatigue.2021.106412 ↗