Comparative Analysis of Properties and Behaviour of Scaffolding Joints and Anchors
Source abstract
Abstract
Scaffolds are temporary structures that workers usually use during building or repair work. These structures can be built in different shapes and types depending on the type of joints to which the beams and columns of the scaffolds are connected. Due to their temporary nature, they are very sensitive to vibration under dynamic or static actions, and this causes many accidents and unstable behaviours in them. This unstable behaviour has different reasons, including bracing conditions and slenderness of the columns, stiffness of joints and anchors, imperfections in the construction, damage and corrosion due to climate change, etc. This article aims to reanalyse the mechanical properties of scaffold joints and anchors and obtain some critical factors in the overall stability of the mentioned structures, including load-bearing capacity, initial stiffness, energy absorption, and ductility. To this aim, some recent research on scaffolds has been summarised and discussed, and then the failure mode and mechanical behaviour of the scaffolds in different types of scaffold joints and anchors have been estimated and considered from previous studies. Moreover, some mechanical properties, including ductility, initial stiffness, and energy absorption, have been estimated and developed based on the force-displacement curves of previous studies. The results highlight the crucial importance of the mechanical properties and behaviour of anchors and joints in estimating the behaviour and stability of scaffolds. The results also revealed that determining the mechanical characteristics of the mentioned elements can have a significant influence on the optimisation and design of scaffolds more accurately and predictably. Moreover, determining the mechanical properties of the anchors and joints can enhance our insights and understanding of how the mentioned parameters can improve the behaviour, stability, and safety of the scaffold structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Construction Engineering and Safety · BIM and Construction Integration · Structural mechanics and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Civil Engineering, Wrocław University of Science and Technology, ul. Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
Faculty of Civil Engineering and Architecture, Lublin University of Technology, ul. Nadbystrzycka 40, 20-618 Lublin, Poland
Funding
Lublin University of Technology · Wroclaw University of Technology
References (46)
Show source-provided references
1. Błazik-Borowa, E., Jamińska-Gadomska, P., and Pieńko, M. (2020). Influence of foundation quality on the stress in the elements of steel façade scaffolding. Buildings, 10.10.3390/buildings10070130 ↗
2. Experimental and theoretical studies on the stability of steel tube–coupler scaffolds with different connection joints10.1016/j.engstruct.2015.10.015 ↗
3. Chandrangsu, T., and Rasmussen, K.J.R. (2009, January 16–18). Geometric imperfection measurements and joint stiffness of support scaffold systems. Proceedings of the Sixth International Conference on Advances in Steel Structures, Hong Kong, China.
4. Investigation of geometric imperfections and joint stiffness of support scaffold systems10.1016/j.jcsr.2010.12.004 ↗
5. Scaffold research—A review10.1016/j.jcsr.2014.01.016 ↗
6. Influence of dynamic properties on scaffoldings safety10.1007/s43452-021-00295-3 ↗
7. Design of new scaffold anchor based on the updated finite element model10.1016/j.engstruct.2016.03.064 ↗
8. (2003). Temporary Works Equipment–Part 1: Scaffolds–Performance Requirements and General Design (Standard No. EN 12811-1).
9. Methodology based on causes of accidents for forcasting the effects of falls from scaffoldings using the construction industry in Poland as an example10.1016/j.ssci.2022.105945 ↗
10. (2003). Façade Scaffolds Made of Prefabricated Components—Part 1: Products Specifications (Standard No. EN 12810-1).
11. Problems of monitoring critical elements of scaffolding10.24425/ace.2024.151890 ↗
12. (2022). Couplers, Spigot Pins and Baseplates for Use in Falsework and Scaffolds—Part 1: Couplers for Tubes—Requirements and Test Procedures (Standard No. EN 74-1:2022).
13. (2022). Couplers, Spigot Pins and Baseplates for Use in Falsework and Scaffolds—Part 2: Special Couplers—Requirements and Test Procedures (Standard No. EN 74-2:2022).
14. Analysis of scaffolds with connections containing looseness10.1016/j.compstruc.2011.03.016 ↗
15. Experimental and analytical studies on the stability of structural steel tube and coupler scaffolds without X-bracing10.1016/j.engstruct.2009.12.027 ↗
16. Experimental studies of ringlock scaffolding joint10.1016/j.jcsr.2020.106265 ↗
17. Kim, H., Lim, J., Won, J.-H., Kwon, J.-H., and Kim, S. (2021). Suggestion of safety certification standards and performance evaluation methods for fabricated mobile scaffold in South Korea. Int. J. Environ. Res. Public Health, 19.10.3390/ijerph19010133 ↗
18. Experimental and analytical investigations of scaffolds with anchor rod and plank10.1142/S0219455409003041 ↗
19. Properties of tube and fitting scaffold connections under cyclical loads10.1016/j.jcsr.2020.106008 ↗
20. Nondestructive testing procedure to evaluate the load-carrying capacity of concrete anchors10.1061/(ASCE)CO.1943-7862.0001105 ↗
21. Latin hypercube sensitivity analysis and non-destructive test to evaluate the pull-out strength of steel anchor bolts embedded in concrete10.1016/j.conbuildmat.2021.123256 ↗
22. Schmidt-hammer exposure-age dating: A review of principles and practice10.1016/j.earscirev.2022.104038 ↗
23. Investigation of joint behaviour of disk-lock and cuplok steel tubular scaffold10.1016/j.jcsr.2020.106415 ↗
24. A numerical study on rotational stiffness characteristics of the disk lock joint10.1016/j.jcsr.2023.107968 ↗
25. The dynamics of loosely jointed structures10.1016/S0020-7462(02)00219-6 ↗
26. System reliability-based limit state design of support scaffolding systems10.1016/j.engstruct.2020.110677 ↗
27. Experimental study on joint stiffness with vision-based system and geometric imperfections of temporary member structure10.3846/jcem.2018.299 ↗
28. Experimental study on bearing capacity of reinforced steel tubular scaffold under uniform loads
29. Analysis of ledger-stand joints in the aluminum modular scaffold10.1515/ace-2017-0002 ↗
30. Health status monitoring of cuplock scaffold joint connection based on wavelet packet analysis
31. Research on the tensile performance of plug-pin scaffold joints in low-temperature10.1016/j.jcsr.2024.108589 ↗
32. Research on the bi-directional bending performance of plug-pin scaffold joints in low-temperature10.1016/j.jcsr.2023.108343 ↗
33. Research on the compressive performance of plug-pin scaffold joints in low-temperature10.1016/j.jcsr.2024.108497 ↗
34. Experimental studies of the sorbite stainless steel plug-pin scaffold joint
35. Progressive collapse of system scaffolds with accidental removal of bracing members10.1016/j.jcsr.2024.108720 ↗
36. Alqattan, H.F., El Aghoury, I.M., and Ibrahim, S.A.-B. (2024). Experimental investigation and analytical modeling of steel falsework systems. Structures, Elsevier.10.1016/j.istruc.2024.107623 ↗
37. Influence of anchoring and bracing system on dynamic characteristics of façade scaffolding
38. Wind Load Analysis on Temporary Scaffolding Structures in High-Altitude Venues Based on Numerical Simulation: A Case Study From the 2022 Beijing Olympics10.1155/2024/3746675 ↗
39. Wind load on façade scaffolding without protective cover–Eurocode and in-situ measurement approaches10.1016/j.jobe.2021.102516 ↗
40. Zhang, C., Yang, J., Jiang, L., and He, Y. (2024). Experimental Studies and Finite Element Analysis of Socket-Type Keyway Steel Pipe Scaffolding. Buildings, 14.10.3390/buildings14010245 ↗
41. Continuous monitoring of a large movable scaffolding under operation10.1016/j.autcon.2023.105084 ↗
42. Image hashing-based shallow object tracker for construction worker monitoring in scaffolding scenes10.1016/j.autcon.2024.105604 ↗
43. Point cloud registration considering safety nets during scaffold installation using sensor fusion and deep learning10.1016/j.autcon.2024.105277 ↗
44. The influence of the dimension and configuration of geometric imperfections on the static strength of a typical façade scaffolding10.1016/j.acme.2015.11.003 ↗
45. (2002). Temporary Works Equipment—Part 3: Load Testing (Standard No. EN 12811-3:2002).
46. Jia, S., Zhou, F., and Chen, Z. (2021). Analysis on the Mechanical Performance of the Joints of the Wheel-Coupler Type Formwork Support. E3S Web of Conferences, EDP Sciences.10.1051/e3sconf/202126102070 ↗