Low cycle fatigue life of Ti–6Al–4V alloy under non-proportional loading
Source abstract
Abstract
Abstract Multiaxial low cycle fatigue life of Ti–6Al–4V under non-proportional loading was studied. Strain-controlled multiaxial fatigue tests at room temperature were carried out using tubular specimens. The strain paths employed were push–pull loading, reversed torsion loading, and two kinds of 90° out-of-phase loadings. The former two loadings are proportional loading tests where the principal directions of stress and strain are fixed in the cycle. The latter two are non-proportional loading tests where there is a 90° phase difference between axial and shear loadings, and the principal directions are cyclically rotated continuously. Failure lives are reduced obviously by non-proportional loadings in comparison with those in proportional loading tests. This paper focuses on determining a suitable fatigue model for evaluating the failure lives of Ti–6Al–4V under multiaxial loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Cyclic deformation of 1%Cr–Mo–V steel under out-of-phase loads10.1111/j.1460-2695.1979.tb01357.x ↗
2. McDowell FL. On the path dependence of transient hardening and softening to stable states under complex biaxial cyclic loading. In: Desai, Gallagher, editors. Proc int conf constitutive laws eng mater; 1983. p. 125–135.
3. Comparison of the stress response of an aluminum alloy tube to proportional and alternate axial and shear strain paths at room temperature10.1016/0167-6636(83)90013-3 ↗
4. Multiaxial fatigue damage models10.1115/1.3225980 ↗
5. The effect of axial-torsional straining phase on elevated-temperature biaxial low-cycle fatigue life in SUS304 stainless steel10.2472/jsms.36.376 ↗
6. Dislocation substructures and nonproportional hardening10.1115/1.2903357 ↗
7. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
8. Non-proportional low cycle fatigue criterion for type 304 stainless steel10.1115/1.2804541 ↗
9. Low-cycle fatigue under non-proportional loading10.1111/j.1460-2695.1996.tb01020.x ↗
10. Non-proportional low cycle fatigue of 6061 aluminum alloy under 14 strain path10.1016/S1566-1369(99)80006-5 ↗
11. Multiaxial fatigue
12. Effect of direction change in maximum principal strain axis on multiaxial low cycle fatigue life of type 304 stainless steel at elevated temperature10.2472/jsms.49.988 ↗
13. A model for evaluation of low cycle fatigue lives under non-proportional straining10.2472/jsms.50.1317 ↗
14. Low-cycle fatigue of 1Cr-18Ni-9Ti stainless steel and related weld metal under axial, torsional and 90°out-of-phase loading10.1111/j.1460-2695.2004.00740.x ↗
15. Multiaxial fatigue of titanium including step loading and load path alteration and sequence effects10.1016/j.ijfatigue.2010.05.006 ↗
16. Material dependence of multiaxial low cycle fatigue lives under non-proportional loading10.1016/j.ijfatigue.2010.12.001 ↗
17. Evaluation of multiaxial fatigue life prediction methodologies for Ti–6Al–4V10.1115/1.1446075 ↗
18. Effects of microstructure on fretting fatigue crack initiation behavior of Ti–6Al–4V10.1016/j.msea.2004.05.019 ↗
19. Fatigue crack Initiation and growth behavior of Ti–6Al–4V under non-proportional multiaxial loading10.1016/j.ijfatigue.2010.12.013 ↗
20. Modified theory of fatigue failure under combined stress
21. A shear stress based critical plane criterion of multiaxial fatigue failure for design and life prediction10.1111/j.1460-2695.1994.tb00789.x ↗
22. A theory for fatigue under multiaxial stress–strain conditions10.1243/PIME_PROC_1973_187_161_02 ↗
23. A path-independent parameter for fatigue under proportional and non-proportional loading10.1111/j.1460-2695.1993.tb00739.x ↗
24. A stress–strain parameter for the fatigue of metals
25. Wu M. Multiaxial fatigue strength of Ti-6Al-4V alloy and life evaluation model under non-proportional loading. Master thesis, University of Fukui; 2011. p. 33.
26. ASME. Boiler and pressure vessel code section III, division 1 NH; 2004.
27. ASME. Boiler and pressure vessel code section VIII, division 3; 2004.
28. Itoh T, Sakane M, Shimizu Y. Determination of stress and strain ranges and mean values under multiaxial loading, In: Proc 12th Int conf pressure vessel tech (ICPVT-12); 2009, CD.