Dynamic Analysis and Force Adaptation in Elastic-Link Mechanical Systems with Two Degrees of Freedom
Source abstract
Abstract
This study presents a comprehensive dynamic analysis of mechanical systems incorporating elastic joints and introduces an adaptive vibration actuator with an integrated transmission variator. The system’s behavior is modeled through kinematic and dynamic formulations, utilizing both analytical and numerical methods. The analysis reveals that the inclusion of elastic elements enables a force adaptation effect, allowing the output element to adjust dynamically to variations in external loading. Under conditions of constant input power, the output speed varies inversely with the load, ensuring reliable adaptive performance. Furthermore, the elastic joints facilitate internal force redistribution, enhancing energy efficiency and reducing mechanical losses. These findings hold relevance for applications in industrial automation and robotics, where consistent functionality under variable load conditions is essential.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Prosthetics and Rehabilitation Robotics · Robotic Mechanisms and Dynamics · Hydraulic and Pneumatic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aerospace Engineering, Almaty University of Power Engineering and Telecommunications named after G. Daukeev, Almaty 050013, Kazakhstan
Funding
Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan
References (41)
Show source-provided references
1. LPV model-based adaptive MPC of an eVTOL aircraft during tilt transition subject to motor failure10.1007/s12555-021-0915-1 ↗
2. Enhancing aircraft engine remaining useful life prediction via multiscale deep transfer learning with limited data
3. Sariyildiz, E., Yang, G., and Ohnishi, K. (2023). Design and control of a novel variable stiffness series elastic actuator (VSSEA). arXiv.10.1109/TMECH.2022.3232471 ↗
4. Westermann, T., Wöhrl, T., Coros, S., and Paik, J. (2025). Compliant beaded-string jamming for variable stiffness anthropomorphic fingers. arXiv.10.1109/RoboSoft63089.2025.11020832 ↗
5. Chatziandreou, M., He, L., and Semini, C. (2022). Design of a parallel elastic actuator with a continuously-adjustable equilibrium position (AE-PEA). arXiv.
6. A linkage-type self-adaptive deformable tracked mechanism based on the six-bar mechanism10.5194/ms-15-541-2024 ↗
7. Variable stiffness actuators: Review on design and components10.1109/TMECH.2015.2501019 ↗
8. Variable impedance actuators: A review10.1016/j.robot.2013.06.009 ↗
9. Swarm of micro flying robots in the wild10.1126/scirobotics.abm5954 ↗
10. Phase deviation of semi-active suspension control and its compensation with inertial suspension10.1007/s10409-023-23367-x ↗
11. Mantriota, G., and Reina, G. (2021). Dual-motor planetary transmission to improve efficiency in electric vehicles. Machines, 9.10.3390/machines9030058 ↗
12. Meng, D., Wang, F., Wang, Y., and Gao, B. (2021). In-wheel two-speed AMT with selectable one-way clutch for electric vehicles. Actuators, 10.10.3390/act10090220 ↗
13. Lemerle, S., Catalano, M.G., Bicchi, A., and Grioli, G. (2021). A configurable architecture for two degree-of-freedom variable stiffness actuators to match the compliant behavior of human joints. Front. Robot. AI, 8.10.3389/frobt.2021.614145 ↗
14. Louback, E., Machado, F., Bruck, L., Kollmeyer, P.J., and Emadi, A. (2022, January 15–17). Real-time performance and driveability analysis of a clutchless multi-speed gearbox for battery electric vehicle applications. Proceedings of the 2022 IEEE Transportation Electrification Conference & Expo (ITEC), Anaheim, CA, USA.10.1109/ITEC53557.2022.9814032 ↗
15. Tuan, H.M., Sanfilippo, F., and Hao, N.V. (2021). Modelling and control of a 2-DOF robot arm with elastic joints for safe human-robot interaction. Front. Robot. AI, 8.10.3389/frobt.2021.679304 ↗
16. Matt, J.J., Hagerott, S.G., Svoboda, B.C., Chao, H., and Flanagan, H.P. (2022, January 3–7). Frequency domain system identification of a small flying-wing UAS. Proceedings of the AIAA SCITECH 2022 Forum, San Diego, CA, USA.10.2514/6.2022-2407 ↗
17. Swanke, J., and Jahns, T.M. (2021, January 11–13). Reliability analysis of a fault-tolerant integrated modular motor drive (IMMD) for an urban air mobility (UAM) aircraft using Markov chains. Proceedings of the 2021 AIAA/IEEE Electric Aircraft Technologies Symposium (EATS), Virtually.10.2514/6.2021-3304 ↗
18. Aircraft control with the use of model reference adaptive control10.1108/AEAT-11-2020-0248 ↗
19. Semiempirical identification of nonlinear dynamics of a two-degree-of-freedom real torsion pendulum with a nonuniform planar stick–slip friction and elastic barriers10.1007/s11071-020-05684-6 ↗
20. Jin, H., Luo, M., Lu, S., He, Q., and Lin, Y. (2022). Design and analysis of a novel variable stiffness joint for robot. Actuators, 12.10.3390/act12010010 ↗
21. The modelling of two DOF joints controlled by elastic inner ties10.1051/itmconf/20171503008 ↗
22. Radzevich, S.P. (2019). Advances in Gear Design and Manufacture, CRC Press.10.1201/9781351049832 ↗
23. (2018). Continuously Variable Transmissions. Automotive Power Transmission Systems, Wiley.
24. Design and modeling of energy efficient dual clutch transmission with ball-ramp self-energizing mechanism10.1109/TVT.2019.2963332 ↗
25. Multi-speed gearboxes for battery electric vehicles: Current status and future trends10.1109/OJVT.2021.3124411 ↗
26. CVT discrete speed ratio optimizations based on energy efficiency for PHEV10.1016/j.aej.2021.09.038 ↗
27. Wang, R., Lu, Z., Wang, Y., and Li, Z. (2025). The design and analysis of a lightweight robotic arm based on a load-adaptive hoisting mechanism. Actuators, 14.10.3390/act14020071 ↗
28. Automatic-box (CVT) without hydraulics
29. Crockett, S.J. (1990). Shiftless, Continuously-Aligning Transmission. (4,932,928), U.S. Patent.
30. Volkov, I.V. (2004). Way of Automatic and Continuous Change of a Twisting Moment and Speed of Twirl of the Output Shaft Depending on a Tractive Resistance and the Device for Its Realization. (2,234,626), Patent RU.
31. Harries, J. (1991). Power Transmission System Comprising Two Sets of Epicyclic Gears. (2238090 (A)), Patent GB.
32. Dynamics analysis of active variable stiffness vibration isolator for whole-spacecraft systems based on nonlinear output frequency response functions10.1007/s10338-020-00198-5 ↗
33. Continuously variable transmission and stiffness actuator based on actively variable four-bar linkage for highly dynamic robot systems10.1109/LRA.2024.3418268 ↗
34. Series-elastic actuator with two degree-of-freedom PID control improves torque control in a powered knee exoskeleton10.1017/wtc.2023.20 ↗
35. Leveraging natural load dynamics with variable gear-ratio actuators10.1109/LRA.2017.2651946 ↗
36. Girard, A., and Asada, H.H. (2022). A fast gear-shifting actuator for robotic tasks with contacts. arXiv.
37. Stiffness-fault-tolerant control strategy for elastic actuators with interaction impedance adaptation10.1016/j.mechatronics.2024.103265 ↗
38. The model and design of a Spring-Embedded Planetary Dual-Motor Actuator to reduce energy losses10.1016/j.mechmachtheory.2023.105442 ↗
39. Mechanical adaptability analysis of underactuated mechanisms10.1016/j.rcim.2017.08.004 ↗
40. Nguyen, T.T., Nguyen, C.C., Nguyen, T.M., Duong, T.T.C., Ngo, H.T.T., and Sun, L. (2025). Decentralized adaptive control of closed-kinematic chain mechanism manipulators. Machines, 13.10.20944/preprints202503.1138.v1 ↗
41. Review on control strategies for cable-driven parallel robots with model uncertainties10.1186/s10033-024-01149-8 ↗