journal article·2025-09-06Open access

Rayleigh Optic Strain Sensor for Creep Monitoring

Mateusz Kopec, Izabela Mierzejewska, Arkadiusz Grzywa, Aleksandra Gontarczyk, Zbigniew L. Kowalewski

Applied Sciences· Volume 15· Issue 17

Abstract

Operation time and variability in structural, thermal, and environmental loads are important factors affecting the operational safety of power plant structures. Although conventional testing techniques are usually used to assess the level of damage introduced to a structure due to prolonged service, most of them are destructive and time- and cost-intensive. Therefore, in this paper, a novel approach consisting of Rayleigh optic strain sensors for deformation monitoring under creep conditions is proposed. The suitability of this methodology was assessed during quasi-static loading tests at room temperature, as well as during a long-term creep test at 540 °C under constant stress of 130 MPa, which was performed on a specimen made of 13HMF power engineering steel. The sensor attached to the specimen’s surface was used to monitor strain evolution during 678 days of high-temperature exposure under creep conditions. It was confirmed that the methodology proposed could be successfully used to monitor strain changes under quasi-static and creep conditions, as an excellent agreement between the fiber optic strain sensors and conventional strain recorders was achieved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Fiber Optic Sensors · Acoustic Wave Resonator Technologies · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Fundamental Technological Research Polish Academy of Sciences, Pawińskiego 5B, 02-106 Warsaw, Poland

College of Science and Engineering, University of Derby, Markeaton Street, Derby DE22 3AW, UK

Faculty of Advenced Technologies and Chemistry, Military University of Technology, 00-908 Warsaw, Poland

Alioth Logistics Sp. Z o.o., 1-go Sierpnia 6a St, 02-134 Warsaw, Poland

Funding

National Center for Research and Development

References (29)

Show source-provided references
1. The analysis of strain response for as-received and exploited 10H2M power engineering steel subjected to low cycle fatigue in plastic regime10.1016/j.ijpvp.2023.105110 ↗
2. Effect of high temperature exposure on the fatigue damage development of X10CrMoVNb9-1 steel for power plant pipes10.1016/j.ijpvp.2020.104282 ↗
3. (2012). Standard Practice for Production and Evaluation of Field Metallographic Replicas (Standard No. ASTM E1351-01).
4. (2018). Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials (Standard No. ASTM E139-11).
5. Interpretation of non-conventional miniaturized creep test: Derivation of equivalent gauge length10.1016/j.jmrt.2023.04.066 ↗
6. The role of hardness on condition monitoring and lifing for high temperature power plant structural risk management10.1016/j.measurement.2018.09.002 ↗
7. The development of a novel technique for small ring specimen tensile testing10.1016/j.tafmec.2018.11.016 ↗
8. Measurement of Creep Deformation across Welds in 316H Stainless Steel Using Digital Image Correlation10.1007/s11340-016-0245-z ↗
9. Measurement of creep deformation of ex-service 12% Cr steel using digital image correlation10.1177/0309324720904517 ↗
10. Evaluation of residual creep life of steels using macro-pillar creep testing and Omega method10.1016/j.measurement.2021.108991 ↗
11. Measurement of local creep strain in the notch region using AC potential drop technique10.1016/j.measurement.2019.05.032 ↗
12. Creep strain measurement using a potential drop technique10.1016/j.ijmecsci.2016.03.015 ↗
13. Fiber Bragg grating based quasi-distributed bolt force sensor with torque resistance10.1016/j.measurement.2022.111063 ↗
14. Applications of fibre Bragg grating sensors for monitoring geotechnical structures: A comprehensive review10.1016/j.measurement.2023.113171 ↗
15. Tran, H.V., and Seo, S.Y. (2023). Short-Term Creep Effect on Strain Transfer from Fiber-Reinforced Polymer Strips to Fiber Bragg Grating-Optical Fiber Sensors. Sensors, 23.10.3390/s23031628 ↗
16. Strain measurements by FBG-based sensors embedded in various materials manufactured by different technological processes10.1016/j.prostr.2022.01.116 ↗
17. Creep deformation measurement using quartz optical fiber10.1016/S0030-4018(01)01044-6 ↗
18. Monitoring of concrete shrinkage and creep using Fiber Bragg Grating sensors10.1016/j.conbuildmat.2017.01.084 ↗
19. Long-term creep monitoring of composite wing leading edge using embedded fiber Bragg grating10.1177/14759217231202919 ↗
20. Monitoring the behavior of steel structures using distributed optical fiber sensors10.1016/S0143-974X(99)00043-7 ↗
21. Distributed fiber optic sensors for measuring strains of concrete, steel, and textile reinforcement: Possible fields of application10.1002/suco.202100689 ↗
22. Structural monitoring of concrete, steel, and composite bridges in Poland with distributed fibre optic sensors10.1080/15732479.2023.2230558 ↗
23. Bado, M.F., and Casas, J.R. (2021). A Review of Recent Distributed Optical Fiber Sensors Applications for Civil Engineering Structural Health Monitoring. Sensors, 21.10.3390/s21051818 ↗
24. Crack monitoring in reinforced concrete beams by distributed optical fiber sensors10.1080/15732479.2020.1731558 ↗
25. Rayleigh-based crack monitoring with distributed fiber optic sensors: Experimental study on the interaction of spatial resolution and sensor type10.1007/s13349-024-00896-5 ↗
26. Grzywa, A. (2024). High-Temperature Strain Change Measurement System and the Method of Fixing the Strain Sensor to the Tested Surface When Measuring High-Temperature Strain Change. (Patent No. 244901).
27. Optical fiber Bragg grating (FBG)-based strain sensor embedded in different 3D-printed materials: A comparison of performance10.1016/j.measurement.2023.114060 ↗
28. FBG Sensors for Environmental and Biochemical Applications—A Review10.1109/JSEN.2020.2982446 ↗
29. Fiber Bragg grating (FBG)-based sensors: A review of technology and recent applications in structural health monitoring (SHM) of civil engineering structures10.1007/s44290-024-00141-4 ↗