Experimental Testing of the Efficiency, Stability, and Compatibility of Fillers in the Conservation and Restoration of Water-Gilded Wooden Heritage

The conservation and restoration of water-gilded wooden cultural heritage, such as polychrome sculptures, frames, panels, altarpieces, etc., requires the use of fillers that guarantee structural stability, physicochemical and mechanical compatibility with the original support, and the ability to adapt to dimensional movements induced by thermo-hygrometric variations. This study, conducted as part of the DorART Project, analyzed the behavior of nine formulations, both commercial and non-commercial, selected through a review of the state-of-the-art specialized literature, along with the use of participatory science, which focused on the practices and materials most commonly used by professionals in the field. The experimental design was based on three types of specimens: two with wooden supports, selected for evaluating their interaction with the original material and with the traditional water gilding technique, and a third type for analyzing the individual behavior of the tested materials. Analyses of adhesion, tensile strength, Shore C hardness, gloss, abrasion test results, wettability, pH changes, and chemical composition were performed using ATR-FTIR spectroscopy. The results showed significant differences depending on the type of curing used and the composition and aging behavior of the specimen. Some of the fillers demonstrated improved compatibility with water-based gilding, facilitating workability and providing structural strength. M3 and M9 demonstrated an optimal balance of workability and aging stability. The results of this study can help restorers select materials based on their specific needs, considering the requirements of mechanical adaptation to the substrate, compatibility, and durability.