Experimental and numerical investigation of mixed mode I + II and I + III fatigue crack growth in S355J0 steel
Source abstract
Abstract
Abstract This paper presents the results of an experimental investigation about fatigue crack paths and fatigue crack growth on S355J0 steel subjected to I + II and I + III mixed mode conditions both under load ratios R = 0 and 0.1 and different mode mixities. In particular, compact specimens with distinct notch inclinations were exposed to mixed mode I + II (tension and shear) whereas prismatic specimens provided with an external one-sided sharp notch were subjected to mixed mode I + III under distinct bending to torsion ratios. The influences of distinct load mixities on fatigue crack growth rates and fatigue crack growth directions are analysed and discussed in relation to existing theories. Also the influence of each loading mode for the resulting mixed mode fatigue crack propagation is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Suresh · 1991
2. Non-propagating cracks and high-cycle fatigue failures in sharply notched specimens under in-phase Mode I and II loading10.1016/j.engfailanal.2006.11.038 ↗
3. Estimation and consequences of the crack thickness parameter in the assessment of crack growth behaviour of ‘‘squat’’ type cracks in the rail–wheel contact zone10.1016/j.engfracmech.2006.11.017 ↗
4. Fatigue strength for small shallow defects/cracks in torsion
5. Fatigue properties of notched specimens made of FeP04 steel10.1007/s11003-012-9417-x ↗
6. Fracture behaviour of plain and fiber-reinforced concrete with different water content under mixed mode loading10.1016/j.matdes.2009.10.021 ↗
7. Crack path and fracture analysis in FSW of small diameter 6082–T6 aluminium tubes under tension–torsion loading10.1016/j.ijfatigue.2016.02.043 ↗
8. Gasiak G, Robak G. Simulation of fatigue life of constructional steels within the mixed modes I and III loading. Fatigue & Fract Eng Mat & Struct 2011; 34: 389–402.10.1111/j.1460-2695.2010.01528.x ↗
9. Fatigue crack growth in AlCu4Mg1 under nonproportional bending-with-torsion loading10.1007/s11003-011-9341-5 ↗
10. The fatigue crack direction and threshold behaviour of mild steel under mixed mode I and III loading10.1016/0142-1123(85)90004-0 ↗
11. Richard HA, Fulland M, Sander M. Theoretical crack path prediction. Fatigue & Fract of Engng Mater & Struct 2005; 28: 3–12.10.1111/j.1460-2695.2004.00855.x ↗
12. Mixed mode (I+II) fatigue crack growth in puddle iron10.1016/j.engfracmech.2017.05.002 ↗
13. Carpinteri A, Spagnoli A, Vantadori S. A review of multiaxial fatigue criteria for random variable amplitude loads. Fatigue & Fract Eng Mater & Struct 2017; 40(7): 1007–36.10.1111/ffe.12619 ↗
14. Combined analytical-numerical methodologies for the evaluation of mixed-mode (I+II) fatigue crack growth rates in structural steels10.1016/j.engfracmech.2017.04.016 ↗
15. Shadow optical analysis of dynamic mixed mode loading conditions in impacted izod-type specimens10.1016/0143-8166(93)90036-K ↗
16. Śnieżek L, Ślęzak T, Grzelak K, Hutsaylyuk V. An experimental investigation of propagation the semi-elliptical surface cracks in an austenitic steel. Int J Pressure Vessels and Piping 2016; 144: 35–44.10.1016/j.ijpvp.2016.05.006 ↗
17. Influence of the slot inclination angle in FeP04 steel on fatigue crack growth under tension10.1016/j.matdes.2008.09.017 ↗
18. Yates JR, Miller KJ. Mixed mode (I+III) fatigue thresholds in a forging steel. Fatigue & Fract Eng Mater & Struct 1989; 12: 259–70.10.1111/j.1460-2695.1989.tb00532.x ↗
19. Richard HA. Bruchvorhersagen bei überlagerter normal und schubbeanspruchung von Rissen. VDI Forschungsheft 631, VDI-Verlag, Düsseldorf; 1985. p. 1–60.
20. EN 10025 - Hot rolled products of structural steels; 2004.
21. J-integral in the description of fatigue crack growth rate induced by different ratios of torsion to bending loading in AlCu4Mg110.1002/mawe.200900501 ↗
22. Control system of the fatigue stand for material tests under combined bending with torsion loading and experimental results10.1016/j.ymssp.2007.09.009 ↗
23. Thum · 1960
24. Finite element analysis of fatigue crack growth with interspersed mode I and mixed mode overloads10.1016/j.ijfatigue.2004.10.008 ↗
25. Seifi Rahman, Mohammad Eshraghi. Effects of mixed-mode overloading on the mixed-mode I+II fatigue crack growth. Arch Appl Mech 2013; 83(7).10.1007/s00419-013-0731-z ↗
26. Mixed-mode fatigue crack growth behaviour in aluminium alloy10.1016/j.ijfatigue.2005.07.047 ↗
27. Mixed mode (I+II) fatigue crack growth of long term operating bridge steel10.1016/j.proeng.2016.08.889 ↗
28. Mixed mode I/II/III fatigue crack growth in S355 steel10.1016/j.prostr.2017.07.125 ↗
29. Cornell Fracture Group (authors). Franc3D & OSM 3D Tutorial (version 2.6). Cornell University, USA; 2003; 35 pages. (http://cfg.cornell.edu/software/).
30. Effects of mixed-mode overloading on the mixed-mode I+II fatigue crack growth10.1007/s00419-013-0731-z ↗
31. Harris DO. Stress intensity factors for hollow circumferentially notched round bars. J Bas Engng 1967; 89.10.1115/1.3609569 ↗
32. An experimental technique for fast fracture testing in mixed mode10.1007/BF00032558 ↗
33. Mixed mode fatigue crack growth. A literature survey10.1016/S0013-7944(96)00071-9 ↗
34. A survey of failure criteria and parameters in mixed-mode fatigue crack growth10.1007/s11003-009-9179-2 ↗
35. The calculation of stress intensity factors for combined tensile and shear loading10.1007/BF00116368 ↗
36. Erdogan F, Sih GC. On the crack extension in plates under plane loading and transverse shear. J Bas Engng, ASME Trans 1963; 85: 519–25.10.1115/1.3656897 ↗
37. Strain-energy-density factor applied to mixed-mode crack problems10.1007/BF00035493 ↗
38. Straightforward comparison of fatigue crack growth under modes II and III10.1016/j.ijfatigue.2007.09.009 ↗
39. Mixed-mode fatigue crack growth behavior of fully lower bainite steel10.1016/j.msea.2013.05.065 ↗
40. Mixed mode fatigue crack growth behavior of Ni-Cr-Mo-V high strength steel weldments10.1016/j.ijfatigue.2017.05.001 ↗