Unified viscoplasticity modelling for a SiMo 4.06 cast iron under isothermal low-cycle fatigue-creep and thermo-mechanical fatigue loading conditions
Source abstract
Abstract
Abstract In this paper, a SiMo 4.06 cast iron is subjected to Low-Cycle Fatigue (LCF) loading and Thermo-Mechanical Fatigue (TMF) loading in the temperature range between 20 °C and 650 °C. Strain-controlled experiments were performed for various strain rates, with and without a tensile strain dwell. A modified unified viscoplastic material model is proposed for simulating the temperature- and time-dependent cyclic behaviour of the material. The constitutive model is based on the non-linear kinematic hardening rule of Chaboche, in which several features are added in order to incorporate strain rate sensitivity, the strain range dependency of the cyclic hardening and the elastic modulus, static recovery and mean stress evolution. A good correlation was achieved between the simulated results and the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Unified viscoplasticity modeling for isothermal low-cycle fatigue and fatigue-creep stress–strain responses of haynes 23010.1016/j.ijsolstr.2016.03.012 ↗
2. Creep–fatigue behavior at high temperature of a udimet 720 nickel-base superalloy10.1016/j.ijfatigue.2009.07.003 ↗
3. Creep-fatigue behavior of turbine disc of superalloy gh720li at 650 c and probabilistic creep-fatigue modeling10.1016/j.msea.2016.05.117 ↗
4. A computational approach to thermomechanical fatigue10.1016/j.ijfatigue.2004.01.006 ↗
5. A constitutive equation of creep based on the concept of a creep-hardening surface10.1016/0020-7683(82)90042-7 ↗
6. Kawai M, Ohashi Y. Couple effect between creep and plasticity of type 316 stainless steel at elevated temperature, Tech. rep., Los Alamos National Lab., NM (USA); Nagoya Univ.(Japan); Aichi Inst. of Tech...; 1987.
7. Description of creep-plasticity interaction with non-unified constitutive equations: application to an austenitic stainless steel10.1016/0029-5493(89)90087-3 ↗
8. Study of plastic/viscoplastic models with various inelastic mechanisms10.1016/S0749-6419(95)00040-2 ↗
9. Cyclic behavior modeling of a tempered martensitic hot work tool steel10.1016/j.ijplas.2005.03.007 ↗
10. Visco-plasticity—plasticity and creep in elastic solids—a unified numerical solution approach10.1002/nme.1620080411 ↗
11. Corum J, Blass J. Rules for design of alloy 617 nuclear components to very high temperatures, Tech. rep., Oak Ridge National Lab.; 1991.
12. Viscoplastic models for high temperature applications10.1016/S0020-7683(99)00093-1 ↗
13. Constitutive equations for cyclic plasticity and cyclic viscoplasticity10.1016/0749-6419(89)90015-6 ↗
14. A review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
15. Lemaitre · 1994
16. An inelastic constitutive model for monotonic, cyclic, and creep deformation: Part i—equations development and analytical procedures10.1115/1.3443367 ↗
17. Review of a unified elastic—viscoplastic theory
18. Robinson D. Unified creep-plasticity model for structural metals at high temperature.[lmfbr], Tech. rep., Oak Ridge National Lab., TN (USA); 1978.10.2172/6546103 ↗
19. Recent developments in the mathematical theory of plasticity10.1063/1.1698348 ↗
20. Armstrong PJ, Frederick C. A mathematical representation of the multiaxial Bauschinger effect, vol. 731, Central Electricity Generating Board [and] Berkeley Nuclear Laboratories, Research & Development Department Berkeley; 1966.
21. Time-independent constitutive theories for cyclic plasticity10.1016/0749-6419(86)90010-0 ↗
22. On some modifications of kinematic hardening to improve the description of ratchetting effects10.1016/0749-6419(91)90050-9 ↗
23. Kinematic hardening rules with critical state of dynamic recovery, part i: formulation and basic features for ratchetting behavior10.1016/0749-6419(93)90042-O ↗
24. Modeling of cyclic ratchetting plasticity, part i: development of constitutive relations10.1115/1.2823355 ↗
25. Kinematic hardening model suitable for ratchetting with steady-state10.1016/S0749-6419(99)00052-2 ↗
26. An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation10.1016/S0749-6419(01)00012-2 ↗
27. A visco–plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratcheting of ss304 stainless steel at room temperature10.1016/S0167-6636(02)00153-9 ↗
28. Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models10.1016/j.ijplas.2008.04.008 ↗
29. Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 30410.1016/j.ijplas.2008.12.009 ↗
30. Chaboche J, Van KD, Cordier G. Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel.
31. On the constitutive equations for cyclic plasticity under nonproportional loading10.1016/0749-6419(85)90018-X ↗
32. A constitutive model of cyclic plasticity with a nonhardening strain region10.1115/1.3162603 ↗
33. Constitutive modeling of strain range dependent cyclic hardening10.1016/S0749-6419(03)00016-0 ↗
34. A viscoplastic constitutive model for nickel-base superalloy, part 1: kinematic hardening rule of anisotropic dynamic recovery10.1016/S0749-6419(01)00029-8 ↗
35. A viscoplastic constitutive model for nickel-base superalloy, part 2: modeling under anisothermal conditions10.1016/S0749-6419(01)00030-4 ↗
36. Theory of creep with anisotropic hardening10.1016/0020-7403(72)90065-3 ↗
37. A nonlinear kinematic hardening theory for cyclic thermoplasticity and thermoviscoplasticity10.1016/0749-6419(92)90024-7 ↗
38. Numerical integration and fem-implementation of a viscoplastic chaboche-model with static recovery10.1007/s00466-005-0704-3 ↗
39. Interaction of cyclic softening and stress relaxation of 9–12% cr steel under strain-controlled fatigue-creep condition: experimental and modeling10.1016/j.ijplas.2017.06.007 ↗
40. Evaluation of change in material properties due to plastic deformation10.1016/j.jmatprotec.2004.04.114 ↗
41. Variation of elastic modulus during plastic deformation and its influence on springback10.1016/j.matdes.2008.05.064 ↗
42. Extension of quasi-plastic–elastic approach to incorporate complex plastic flow behavior–application to springback of advanced high-strength steels10.1016/j.ijplas.2013.01.011 ↗
43. Elastic–plastic behavior of steel sheets under in-plane cyclic tension–compression at large strain10.1016/S0749-6419(01)00049-3 ↗
44. The elastic–plastic transition of metals10.1016/j.ijplas.2016.04.009 ↗
45. New formulation of nonlinear kinematic hardening model, part i: a dirac delta function approach10.1016/j.ijplas.2019.07.006 ↗
46. A study of cyclic plasticity and viscoplasticity in a new nickel-based superalloy using unified constitutive equations. part i: evaluation and determination of material parameters10.1016/j.mechmat.2006.01.005 ↗
47. An improved unified viscoplastic constitutive model for strain-rate sensitivity in high temperature fatigue10.1016/j.ijfatigue.2012.11.001 ↗
48. Constitutive modeling for thermo-mechanical low-cycle fatigue-creep stress–strain responses of haynes 23010.1016/j.ijsolstr.2017.07.031 ↗
49. Life assessment of simo 4.06 cast iron under lcf and tmf loading conditions10.1080/09603409.2018.1542825 ↗
50. Thermo-mechanical fatigue of simo 4.06 turbocharger turbine housing: Damage operator approach10.1016/j.engfailanal.2019.06.068 ↗
51. Nucleation and growth of cracks and cavities under creep-fatigue interaction10.1016/0079-6425(93)90006-7 ↗
52. Isothermal low-cycle fatigue and fatigue-creep of haynes 23010.1016/j.ijsolstr.2016.03.011 ↗
53. Dunne · 2005
54. Anatomy of coupled constitutive models for ratcheting simulation10.1016/S0749-6419(99)00059-5 ↗
55. Temperature dependent representation for chaboche kinematic hardening model10.1179/1878641314Y.0000000036 ↗