CFD and Experimental Comparison for Micro-Pump Performance in Space Applications: A Case Study
Source abstract
Abstract
This paper presents a case study comparing CFD predictions with experimental measurements for micropumps, with the goal of evaluating the accuracy and limitations of CFD methods in complex microscale geometries. A fast design and evaluation methodology was developed, integrating linear design, 3D fully viscous CFD-based optimization, and rapid prototyping and testing. The main problem at this scale and configuration of pumps is the combination of Reynolds and Taylor numbers. Their impact on labyrinth performance prediction and therefore volumetric efficiency dominates the losses at this scale. Multiple CFD simulations were conducted using various turbulence models and solver settings, and results were compared against experimental data. The labyrinth region was simulated both independently and as part of the full pump assembly, with RANS and LES used for the former and RANS for the latter. Precision 3D-printed rotors and volutes were tested, and performance maps were obtained. Significant discrepancies between CFD and experiments were observed, which were reconciled using two empirical scaling coefficients for pressure and mass flow. These collapsed the CFD predictions onto the experimental data across all available speedlines. While the generalizability of these coefficients remains uncertain, the concept of using corrected scales, rather than other methods, seems to capture the macroscopic discrepancies between CFD and experiments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Rocket and propulsion systems research · Spacecraft and Cryogenic Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Romanian Research and Development Institute for Gas Turbines COMOTI, 061126 Bucharest, Romania
Funding
European Space Agency · Romanian Ministry of Research Innovation and Digitalization
References (45)
Show source-provided references
1. Effect of impeller blades number on the performance of a centrifugal pump10.1016/j.aej.2019.02.004 ↗
2. Han, X., Kang, Y., Li, D., and Zhao, W. (2018). Impeller Optimized Design of the Centrifugal Pump: A Numerical and Experimental Investigation. Energies, 11.10.3390/en11061444 ↗
3. PIV validation of different turbulence models used for numerical simulation of a centrifugal pump diffuser10.1108/EC-07-2016-0251 ↗
4. Optimization on the impeller of a low-specific-speed centrifugal pump for hydraulic performance improvement10.3901/CJME.2016.0519.069 ↗
5. Effect of semi-open impeller side clearance on the centrifugal pump performance using CFD10.1016/j.ast.2015.09.033 ↗
6. Wu, Y., Li, Q., Yuan, H., Li, Z., Zhou, S., Han, G., and Lu, X. (2024). Performance Improvement of a High Loading Centrifugal Compressor with Vaned Diffuser by Hub Contour Optimization. Aerospace, 11.10.3390/aerospace11040246 ↗
7. Performance analysis of double suction centrifugal pumps with a novel impeller configuration
8. Experimental and Numerical Studies in a Centrifugal Pump With Two-Dimensional Curved Blades in Cavitating Condition10.1115/1.1596238 ↗
9. Effect of the volute tongue profile on the performance of a low specific speed centrifugal pump10.1177/0957650914562095 ↗
10. Experimental and CFD investigation of a multistage centrifugal pump including leakages and balance holes10.5004/dwt.2017.20153 ↗
11. The effect of balancing holes on performance of a centrifugal pump: Numerical and experimental investigations, 29th IAHR Symposium on Hydraulic Machinery and Systems10.1088/1755-1315/240/3/032017 ↗
12. Efficiency Improvement of Centrifugal Reverse Pumps10.1115/1.3059700 ↗
13. Efficiency improvement and evaluation of a centrifugal pump with vaned diffuser
14. Liu, Y.-Y., Yang, G., Xu, Y., Peng, F., and Wang, L.-Q. (2020). Effect of space diffuser on flow characteristics of a centrifugal pump by computational fluid dynamic analysis. PLoS ONE, 15.10.1371/journal.pone.0228051 ↗
15. Valentini, D., Pace, G., Pasini, A., Hadavandi, R., and D’Agostino, L. (2018). Experimental Characterization of Unsteady Forces Triggered by Cavitation on a Centrifugal Pump. Int. J. Turbomach. Propuls. Power, 3.10.3390/ijtpp3020013 ↗
16. Influence of Surface Roughness on the Pump Performance Based on Computational Fluid Dynamics10.1109/ACCESS.2019.2932021 ↗
17. Design techniques to improve the performance of a centrifugal pump using CFD10.1007/s12206-014-1228-6 ↗
18. Automatic optimization of a centrifugal pump based on impeller–diffuser interaction10.1177/0957650918766688 ↗
19. High-efficiency design optimization of a centrifugal pump10.1007/s12206-016-0803-4 ↗
20. Optimization of the diffuser in a centrifugal pump by combining response surface method with multi-island genetic algorithm10.1177/0954408915586310 ↗
21. Pareto based multi-objective optimization of centrifugal pumps using CFD, Neural networks and genetic algorithms
22. Gu, Y.D., Pei, J., Yuan, S.Q., Zhang, J.F., and Wang, W.J. (2016, January 10–15). Multi-objective optimization of centrifugal pump impeller based on kriging model and multi-island genetic algorithm. Proceedings of the 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, HI, USA.
23. Design Optimization of a Centrifugal Pump Using Particle Swarm Optimization Algorithm10.5293/IJFMS.2019.12.4.322 ↗
24. The Optimal Hydraulic Design of Centrifugal Impeller Using Genetic Algorithm with BVF10.1155/2014/845302 ↗
25. Multi-objective optimization of a low specific speed centrifugal pump using an evolutionary algorithm10.1080/0305215X.2015.1104987 ↗
26. Significant potential and materials used in additive manufacturing technologies towards sustainability10.1016/j.susoc.2023.11.004 ↗
27. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
28. Materials, Application Status and Development Trends of Additive Manufacturing Technology10.2320/matertrans.MT-M2020023 ↗
29. Adiaconitei, A., Vintila, I.S., Mihalache, R., Paraschiv, A., Frigioescu, T., Vladut, M., and Pambaguian, L. (2021). A Study on Using the Additive Manufacturing Process for the Development of a Closed Pump Impeller for Mechanically Pumped Fluid Loop Systems. Materials, 14.10.3390/ma14040967 ↗
30. Adiaconitei, A., Vintila, I.S., Mihalache, R., Paraschiv, A., Frigioescu, T.F., Popa, I.F., and Pambaguian, L. (2021). Manufacturing of Closed Impeller for Mechanically Pump Fluid Loop Systems Using Selective Laser Melting Additive Manufacturing Technology. Materials, 14.10.3390/ma14205908 ↗
31. Popa, I.F., Dobromirescu, C., Vintila, I.S., Tinca, I., Mihai, D., Canache, A.M., and Crunteanu, D.E. (2024). Hydraulic Performance Comparison of Centrifugal Closed Impellers Fabricated by Means of Additive Manufacturing and Classical Machining for Space Active Thermal Control Systems of Satellites. Appl. Sci., 14.10.3390/app14209448 ↗
32. Drăgan, V., Dumitrescu, O., Dobromirescu, C., and Popa, I.F. (2024). Satellite Thermal Management Pump Impeller Design and Optimization. Inventions, 9.10.3390/inventions9030054 ↗
33. Gülich, J.F. (2014). Centrifugal Pumps, Springer.10.1007/978-3-642-40114-5 ↗
34. Lobanoff, V.S., and Ross, R.R. (1992). Centrifugal Pumps Design and Application, Gulf Professional Publishing. [2nd ed.].10.1016/B978-0-08-050085-0.50007-2 ↗
35. Pumps, S. (2010). Centrifugal Pump Handbook, Butterworth-Heinemann. [3rd ed.].
36. Research on Pump Volute Design Method Using CFD10.1155/2011/137860 ↗
37. Experimental and numerical optimization of a centrifugal pump volute and its effect on head and hydraulic efficiency at the best efficiency point10.1177/09544062211056019 ↗
38. Wall-Modeled Large-Eddy Simulation for Complex Turbulent Flows10.1146/annurev-fluid-122316-045241 ↗
39. Wall y+ strategy for dealing with wall-bounded turbulent flows
40. Gerasimov, A. (2024, November 12). Quick Guide to Setting Up LES-type Simulations. European Technology Group ANSYS Sweden AB. Available online: https://www.tfd.chalmers.se/~lada/comp_turb_model/postscript_files/Quick_Guide_to_Setting_Up_LES_version_1.4_for_Lars.pdf.
41. Ferziger, J.H., and Perić, M. (2002). Computational Methods for Fluid Dynamics, Springer. [3rd ed.].10.1007/978-3-642-56026-2 ↗
42. Effects of interface model on performance of a vortex pump in CFD simulations10.1063/5.0196213 ↗
43. Multi-objective optimization design in a centrifugal pump volute based on an RBF neural network and genetic algorithm10.1177/16878132231160390 ↗
44. Hutton, A.G., and Casey, M.V. (2001, January 8). Quality and trust in industrial CFD—A European initiative. Proceedings of the 39th Aerospace Sciences Meeting and Exhibit, Reno, NV, USA.10.2514/6.2001-656 ↗
45. Wilcox, D. (2006). Turbulence Modeling for CFD, DCW industries. [3rd ed.].