Simplified Derivative-Based Carrierless PPM Using VCO and Monostable Multivibrator
Source abstract
Abstract
This study proposes a derivative-based, carrierless pulse position modulation (PPM) scheme utilizing a voltage-controlled oscillator (VCO) and a monostable multivibrator. In contrast to conventional PPM systems that rely on reference carriers or complex demodulation methods, the proposed architecture simplifies signal generation by directly modulating the time derivative of the message signal. The modulated signal, when processed through standard analog demodulators, inherently yields the derivative of the original message. This behavior is first established through theoretical derivations and then confirmed by simulations and circuit-level experiments. The proposed method includes a differentiator feeding into a VCO, followed by a monostable multivibrator to generate a carrierless PPM waveform. Experimental validation confirms that, under all tested demodulation approaches—integrator-based, PLL-based, and quasi-FM—the recovered output aligns with the differentiated message signal. The integration of this output to retrieve the original message was not performed to maintain focus on verifying the modulation principle. Additionally, the study aimed to ensure the consistency of derivative recovery. Signal-to-noise ratio (SNR) expressions for each demodulator type are presented and discussed in the context of their relevance to the proposed system. Limitations and directions for further study are also identified.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Optical Wireless Communication Technologies · Underwater Vehicles and Communication Systems · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand
School of Integrated Innovative Technology, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand
School of Information Technology, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand
Funding
King Mongkut’s Institute of Technology Ladkrabang
References (30)
Show source-provided references
1. FMS flight simulator encoder: Practice without crashing your models
2. Wisartpong, P., Koseeyaporn, J., and Wardkein, P. (2009, January 6–9). Pulse position modulation based on phase locked loop. Proceedings of the 2009 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, Pattaya, Thailand.10.1109/ECTICON.2009.5137073 ↗
3. Pulse time modulation techniques for optical communications: A review10.1049/ip-j.1993.0055 ↗
4. Park, H., and Barry, J.R. (1995, January 18–22). Modulation analysis for wireless infrared communications. Proceedings of the IEEE International Conference on Communications ICC ‘95, Seattle, WA, USA.
5. A survey of free space optics (fso) communication systems, links, and networks10.1109/ACCESS.2020.3048049 ↗
6. The research process, application, and the future development of pulse-position modulation10.1088/1742-6596/2384/1/012026 ↗
7. Yu, Z. (2022, January 25–27). Application of digital pulse position modulation. Proceedings of the International Conference on Neural Networks, Information, and Communication Engineering (NNICE 2022), Qingdao, China.10.1117/12.2640517 ↗
8. Mahdiraji, G.A., and Zahedi, E. (2006, January 27–28). Comparison of selected digital modulation schemes (ook, ppm and dpim) for wireless optical communications. Proceedings of the 2006 4th Student Conference on Research and Development, Shah Alam, Malaysia.10.1109/SCORED.2006.4339297 ↗
9. Liu, Y. (2022, January 25–27). Design of pulse position modulation system based on programmable logic device. Proceedings of the International Conference on Neural Networks, Information, and Communication Engineering (NNICE 2022), Qingdao, China.10.1117/12.2640750 ↗
10. Li, B. (2022, January 25–27). Design of digital pulse-position modulation system based on minimum distance method. Proceedings of the International Conference on Neural Networks, Information, and Communication Engineering (NNICE 2022), Qingdao, China.10.1117/12.2640765 ↗
11. Spectral analysis of intensity modulation schemes in free space optical communications10.1049/iet-com.2014.0869 ↗
12. Spectral analysis of (multi-) pulse-position modulation10.1088/1742-6596/2093/1/012024 ↗
13. Investigation of a hybrid ofdm-pwm/ppm visible light communications system10.1016/j.optcom.2018.08.001 ↗
14. Hybrid modulation scheme for visible light communi-cation using cmos10.1016/j.optcom.2019.01.047 ↗
15. Carlson, A.B., and Crilly, P.B. (2010). Communication Systems: An Introduction to Signals and Noise in Electrical Communication, McGraw-Hill. [5th ed.].
16. Chiang, H.H. (1986). Electronic Wave Forming and Processing Circuits, Wiley.
17. Lathi, B.P., and Ding, Z. (2018). Modern Digital and Analog Communication, Oxford University Press. [5th ed.].
18. Furihata, M. (1985). FM Detector Using Monostable Multivibrators. (US4504792A).
19. Boongsri, R., Wardkein, P., and Chodkaveekityada, P. (2013, January 23–24). FM demodulation based on fm to pwm conversion with voltage gain con-trol. Proceedings of the International Conference on Computer, Networks and Communication Engineering (ICCNCE 2013), Beijing, China.10.2991/iccnce.2013.34 ↗
20. Time-to-voltage converters based on the time-sharing principle10.1109/ACCESS.2020.2966023 ↗
21. Shin, S., Jung, Y., Kweon, S.-J., Lee, E., Park, J.-H., Kim, J., Yoo, H.-J., and Je, M. (2020). Design of reconfigurable time-to-digital converter based on cascaded time interpolators for electrical impedance spectroscopy. Sensors, 20.10.3390/s20071889 ↗
22. A mixed-signal demodulator for a low-complexity ir-uwb receiver: Methodology, simulation and design10.1016/j.vlsi.2008.07.005 ↗
23. Haykin, S., and Moher, M. (2009). Communication Systems, John Wiley & Sons, Inc. [5th ed.].
24. Kozawa, Y. (2024, January 19–22). Selective multi-pulse pulse position modulation for lighting constrained visible light communications. Proceedings of the 2024 IEEE International Symposium on Circuits and Systems (ISCAS), Singapore.10.1109/ISCAS58744.2024.10558266 ↗
25. Multi-carrier based positional modulation design with discrete phase values for metasurface elements10.1016/j.dsp.2023.104047 ↗
26. Carrierless amplitude and phase modulation in wireless visible light communication systems10.1098/rsta.2019.0181 ↗
27. Low-power wireless transceiver with 67-nW differential pulse-position modulation transmitter10.1109/TCSI.2020.3013065 ↗
28. Improved detection schemes for non-coherent pulse-position modulation10.1007/s11277-023-10537-7 ↗
29. Performance enhancement of M-ary pulse-position modulation for a wavelength division multi-plexing free-space optical systems impaired by interchannel crosstalk, pointing error, and ase noise10.1016/j.optcom.2020.126219 ↗
30. Wireless information and power transfer for iot: Pulse position modulation, integrated receiver, and ex-perimental validation10.1109/JIOT.2021.3135712 ↗