Investigation on the fatigue behavior of 7075 aluminum alloy at different aging states
Source abstract
Abstract
To study the effect of the aging state on the low-cycle fatigue (LCF) performance of 7075 Al alloy, LCF experiments with different strain amplitudes (& UDelta;& epsilon;/2 = 0.5%- & UDelta;& epsilon;/2 = 0.9%) were conducted for underaged (UA), peakaging (PA) and overaged (OA) states with similar tensile properties in this work. The effect of the aging state on the cyclic stress response behavior and the LCF lives of 7075 Al alloy was revealed by observing the dislocation configuration after LCF. The microcrack orientation on the surface of LCF samples was observed by the electron backscatter diffraction (EBSD) technique, and the results showed that the soft orientation inside the coarse grains was the main cause of fatigue cracking. Combined with the previous studies, we summarized the dominant factors for the LCF and high-cycle fatigue (HCF) properties of 7075 Al alloys at different aging states, i.e., the LCF properties were determined by tensile properties, while the HCF properties were dominated by dislocation slip mode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. On the mechanical behaviour of AA 7075–T6 during cyclic loading10.1016/S0142-1123(02)00149-4 ↗
2. Low-cycle fatigue characteristics and fracture behavior of the die-forged 2014 aircraft wheel10.1111/ffe.13863 ↗
3. Anisotropic low cycle behavior of the extruded 7075 Al alloy10.3390/ma14164506 ↗
4. Effect of natural aging time on tensile and fatigue anisotropy of extruded 7075 Al alloy10.1016/j.jmrt.2022.04.151 ↗
5. Effect of Fe content on low cycle fatigue behavior of squeeze cast Al-Zn-Mg-Cu alloys10.1016/j.matchar.2020.110680 ↗
6. Effect of Sc addition on low-cycle fatigue properties of extruded Al-Zn-Mg-Cu-Zr alloy10.1080/02670836.2019.1684668 ↗
7. Influence of copper content on the high temperature tensile and low cycle fatigue behavior of cast Al-Cu-Mn-Zr alloys
8. Role of ultrasonic shot peening on low cycle fatigue behavior of 7075 aluminum alloy10.1016/j.ijfatigue.2017.06.033 ↗
9. Effect of surface Nanostructuring on LCF behavior of aluminum alloy 201410.1016/j.msea.2015.09.021 ↗
10. Strengthening and fracture in fatigue (approaches for achieving high fatigue strength)10.1007/BF02642460 ↗
11. Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation10.1016/j.scriptamat.2004.05.012 ↗
12. Cyclic deformation behaviour of three austenitic cast CrMnNi TRIP/TWIP steels with various Ni content10.1002/srin.201100080 ↗
13. The effect of microstructure on the fatigue crack growth behaviour of an AI-Zn-Mg-(Zr) alloy10.1007/BF00023328 ↗
14. Effect of ageing treatment on fatigue crack growth of die forged Al-5.87Zn-2.07Mg-2.42Cu alloy10.1016/j.engfracmech.2019.04.023 ↗
15. Influence of aging on the low cycle fatigue behavior of an Al-Mg-Si alloy10.1080/14786435.2017.1322729 ↗
16. Low cycle fatigue response of differently aged AA6063 alloy: Statistical analysis and microstructural evolution10.1016/j.mtla.2021.101219 ↗
17. A study of the effects of cyclic thermal stresses on a ductile metal
18. Manson · 1954
19. The exponential law of endurance tests
20. Cyclic deformation and fatigue properties of very fine-grained metals and alloys10.1016/j.ijfatigue.2009.10.007 ↗
21. Cyclic deformation and fatigue properties of ultrafine grain size materials: Current Status and some criteria for improvement of the fatigue resistance10.1557/PROC-634-B2.1.1 ↗
22. Cyclic softening of ultra fine grained copper10.1016/S0921-5093(97)00689-8 ↗
23. Effect of aging state on fatigue property of wrought aluminum alloys10.1016/j.ijfatigue.2021.106682 ↗
24. On the role of precipitates in controlling microstructure and mechanical properties of Ag and Sn added 7075 alloys during artificial ageing10.1016/j.msea.2018.09.109 ↗
25. Research progress on microstructure and properties of 7xxx series aluminum alloys for oil drill pipes10.3390/ma12071190 ↗
26. The rapid age strengthening induced by Ag additions in 7075 aluminum alloy10.1016/j.msea.2015.09.044 ↗
27. M.A. Meyers, K.K. Chawla, Mechanical Behavior of Materials, Cambridge University Press, Cambridge, 2009.
28. Effect of chemical composition on work hardening of Fe-Mn-C TWIP steels10.1179/026708309X12535382371852 ↗
29. Fundamental factors on formation mechanism of dislocation arrangements in cyclically deformed fcc single crystals10.1016/j.pmatsci.2010.12.001 ↗
30. The low-cycle fatigue and cyclic fracture behaviour of 7150 aluminum alloy10.1016/0142-1123(91)90358-6 ↗
31. On the reversibility of dislocation slip during cyclic deformation of Al alloys containing shear-resistant particles10.1016/j.actamat.2011.03.007 ↗
32. Cyclic stress-strain behavior and low cycle fatigue life of cast A356 alloys10.1016/j.ijfatigue.2011.07.004 ↗
33. Low-cycle and extremely-low-cycle fatigue behaviors of high-Mn austenitic TRIP/TWIP alloys: Property evaluation, damage mechanisms and life prediction10.1016/j.actamat.2015.11.015 ↗
34. Extremely low-cycle fatigue behaviors of Cu and Cu-Al alloys: Damage mechanisms and life prediction10.1016/j.actamat.2014.10.002 ↗
35. Improving the fatigue strength of 7075 alloy through aging10.1016/j.msea.2018.09.047 ↗
36. Effect of aging treatment on fatigue behavior of an Al-Cu-Mg-Ag alloy10.1007/s11661-013-1876-7 ↗
37. High temperature cyclic deformation of precipitation hardened alloy - I
38. High temperature cyclic deformation of precipitation hardened alloy - II10.1016/0001-6160(79)90078-6 ↗
39. Cyclic stress-strain response of two-phase alloys Part I Microstructures containing particles penetrable by dislocations10.1016/0025-5416(74)90182-7 ↗
40. Cyclic stress-strain response of two-phase alloys Part II
41. The effect of shear-resistant, plate-shaped precipitates on the work hardening of Al alloys: Towards a prediction of the strength-elongation correlation10.1016/j.actamat.2009.08.034 ↗
42. Dynamic precipitation during cyclic deformation of an underaged Al-Cu alloy10.1016/j.msea.2011.06.037 ↗
43. Cyclic stress-strain behavior at a high strain amplitude of Al-Cu crystals containing partially coherent precipitates10.1016/0025-5416(85)90153-3 ↗
44. Effects of fatigue on the GP zones in Al-Zn alloys10.1007/BF02657791 ↗
45. Fatigue particle coarsening in Al-Zn alloy10.1016/0036-9748(86)90267-X ↗
46. Low-cycle fatigue behavior of 7075–T6 aluminum alloy at different strain amplitudes10.1166/mex.2020.1696 ↗
47. Influence of mean stresses on fatigue life and damage of a turbine blade steel in the VHCF-regime10.1016/j.ijfatigue.2012.12.012 ↗
48. Effect of stress ratio on VHCF behavior for a compressor blade titanium alloy10.1016/j.ijfatigue.2016.05.004 ↗