Impact of single structural voids on fatigue properties of AISI 316L manufactured by laser powder bed fusion
Source abstract
Abstract
Abstract The laser powder bed fusion of metals (PBF-LB/M) process is already exploited in several industrial applications. The process itself allows to introduce artificial defects which can later be characterized by their influence on the resulting mechanical properties. In this study, the influence of isolated single structural defects (0.3 mm ≤ √area ≤ 1.5 mm) on the fatigue properties is discussed and the √area-parameter model is applied. The obtained results show that the investigated material is highly defect tolerant as artificial defects with √area = 0.3 mm are not crack initiating. Specimens with a defect of √area = 1.0–1.5 mm clearly show crack initiation and propagation starting from the defect, and a fatigue strength estimation tends to be more conservative.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
2. Microstructural characterization of the anisotropy and cyclic deformation behavior of selective laser melted AlSi10Mg structures10.3390/met8100825 ↗
3. Corrosion and corrosion fatigue properties of additively manufactured magnesium alloy WE43 in comparison to titanium alloy Ti-6Al-4V in physiological environment10.3390/ma12182892 ↗
4. Additive manufacturing of Ti6Al4V alloy: A review10.1016/j.matdes.2018.107552 ↗
5. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
6. Investigation of the anisotropic cyclic damage behavior of selective laser melted AISI 316L stainless steel10.1111/ffe.13029 ↗
7. Metal fabrication by additive manufacturing using laser and electron beam melting technologies10.1016/S1005-0302(12)60016-4 ↗
8. Effect of process parameters on the microstructure, tensile strength and productivity of 316L parts produced by laser powder bed fusion10.1016/j.matchar.2019.110016 ↗
9. Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights10.1016/j.matdes.2019.108385 ↗
10. Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape10.1111/ffe.12799 ↗
11. Materials for additive manufacturing10.1016/j.cirp.2017.05.009 ↗
12. Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel10.1016/j.msea.2018.10.051 ↗
13. Consolidation phenomena in laser and powder-bed based layered manufacturing10.1016/j.cirp.2007.10.004 ↗
14. Effect of miniaturization and surface roughness on the mechanical properties of the electron beam melted superalloy Inconel®718
15. Effect of build orientation on the fatigue properties of as-built Electron Beam Melted Ti-6Al-4V alloy10.1016/j.ijfatigue.2018.08.006 ↗
16. Kim FH, Moylan SP. Literature review of metal additive manufacturing defects. Gaithersburg (MD): National Institute of Standards and Technology; 2018.10.6028/NIST.AMS.100-16 ↗
17. Fundamental consolidation mechanisms during selective beam melting of powders10.1088/0965-0393/21/8/085011 ↗
18. Chemical surface finishing of AlSi10Mg components made by additive manufacturing
19. Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel10.1016/j.matdes.2018.12.006 ↗
20. Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material10.1016/j.msea.2016.10.012 ↗
21. Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters10.1016/j.msea.2017.07.071 ↗
22. Elucidating the relations between monotonic and fatigue properties of laser powder bed fusion stainless steel 316L10.1007/s11837-017-2640-z ↗
23. Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing10.1007/s00170-020-04972-0 ↗
24. Determination of the influence of a stress-relief heat treatment and additively manufactured surface on the fatigue behavior of selectively laser melted AISI 316L by using efficient short-time procedures10.1016/j.ijfatigue.2019.105301 ↗
25. Effect of heat treatment on fatigue crack initiation of laser powder bed fusion stainless steel 316L10.1051/matecconf/201816522006 ↗
26. Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 71810.1016/j.matchar.2018.02.020 ↗
27. Effect of build orientation on the fatigue behavior of stainless steel 316L manufactured via a laser-powder bed fusion process
28. An investigation of the microstructure and fatigue behavior of additively manufactured AISI 316L stainless steel with regard to the influence of heat treatment10.3390/met8040220 ↗
29. Effect of build direction on fatigue performance of L-PBF 316L stainless steel10.1007/s40195-019-00983-3 ↗
30. On the anisotropic mechanical properties of selective laser-melted stainless steel10.3390/ma10101136 ↗
31. Predictive models for fatigue property of laser powder bed fusion stainless steel 316L10.1016/j.matdes.2018.02.054 ↗
32. Investigation of the anisotropic fatigue behavior of additively manufactured structures made of AISI 316L with short-time procedures PhyBaLLIT and PhyBaLCHT10.1016/j.ijfatigue.2019.03.022 ↗
33. A competition between the contour and hatching zones on the high cycle fatigue behaviour of a 316L stainless steel: Analyzed using X-ray computed tomography10.1016/j.msea.2019.04.101 ↗
34. Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.05.018 ↗
35. Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
36. Characterization of the effects of internal pores on tensile properties of additively manufactured austenitic stainless steel 316L10.1007/s11340-018-00465-0 ↗
37. Influence of isolated structural defects on the static mechanical properties of PBF-LB/M components10.1016/j.procir.2020.09.036 ↗
38. Investigation of the effect of artificial internal defects on the tensile behavior of laser powder bed fusion 17-4 stainless steel samples: simultaneous tensile testing and X-ray computed tomography10.1007/s11340-020-00604-6 ↗
39. Influence of the position and size of various deterministic defects on the high cycle fatigue resistance of a 316L steel manufactured by laser powder bed fusion10.1016/j.ijfatigue.2020.105930 ↗
40. Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: Effects of surface roughness and HIP and comparisons with their wrought alloys10.1016/j.ijfatigue.2020.106003 ↗
41. EOS GmbH. Material data sheet – FlexLine; 2017. p. 1–4.
42. Fatigue performance of additive manufactured metallic parts10.1108/13552541311302932 ↗
43. The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder10.1016/j.msea.2013.06.055 ↗
44. Correlation between Young's modulus and porosity in porous materials10.1023/A:1006669914946 ↗
45. Cyclic deformation behavior of steels and light-metal alloys10.1016/j.msea.2006.06.146 ↗
46. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
47. On the fatigue behavior of an AISI 316L stainless steel coated with a PVD TiN deposit10.1016/j.surfcoat.2003.07.003 ↗
48. On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting10.1016/j.engfracmech.2014.03.008 ↗
49. The shape of early persistent slip markings in fatigued 316L steel10.1016/j.msea.2012.11.086 ↗
50. Murakami · 2002
51. Non-destructive characterization of process-induced defects and their effect on the fatigue behavior of austenitic steel 316L made by laser-powder bed fusion10.1007/s40964-019-00105-6 ↗
52. Very high cycle fatigue behaviour of austenitic stainless steel and the effect of strain-induced martensite10.1016/j.ijfatigue.2009.05.007 ↗
53. Specific features of high-cycle and ultra-high-cycle fatigue10.1046/j.1460-2695.2002.00562.x ↗
54. Tensile and fatigue assessments of brazed stainless steel joints using digital image correlation
55. Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing10.1016/j.msea.2017.07.082 ↗
56. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗