Hand–Eye Separation-Based First-Frame Positioning and Follower Tracking Method for Perforating Robotic Arm

In subway tunnel construction, current hand–eye integrated drilling robots use a camera mounted on the drilling arm for image acquisition. However, dust interference and long-distance operation cause a decline in image quality, affecting the stability and accuracy of the visual recognition system. Additionally, the computational complexity of high-precision detection models limits deployment on resource-constrained edge devices, such as industrial controllers. To address these challenges, this paper proposes a dual-arm tunnel drilling robot system with hand–eye separation, utilizing the first-frame localization and follower tracking method. The vision arm (“eye”) provides real-time position data to the drilling arm (“hand”), ensuring accurate and efficient operation. The study employs an RFBNet model for initial frame localization, replacing the original VGG16 backbone with ShuffleNet V2. This reduces model parameters by 30% (135.5 MB vs. 146.3 MB) through channel splitting and depthwise separable convolutions to reduce computational complexity. Additionally, the GIoU loss function is introduced to replace the traditional IoU, further optimizing bounding box regression through the calculation of the minimum enclosing box. This resolves the gradient vanishing problem in traditional IoU and improves average precision (AP) by 3.3% (from 0.91 to 0.94). For continuous tracking, a SiamRPN-based algorithm combined with Kalman filtering and PID control ensures robustness against occlusions and nonlinear disturbances, increasing the success rate by 1.6% (0.639 vs. 0.629). Experimental results show that this approach significantly improves tracking accuracy and operational stability, achieving 31 FPS inference speed on edge devices and providing a deployable solution for tunnel construction’s safety and efficiency needs.