A Study on the Stress Field Around an Elliptical Wellbore with an Eccentric Casing in Deep Wells
Source abstract
Abstract
Casing stress distribution is one of the most relevant topics in the study of the wellbore stress field. Due to factors such as uneven geostress, the wellbore is often elliptical, and the casing may not necessarily be in the center of the wellbore. This article adopts the theory of elasticity and uses the finite element method for calculation. The main research focuses on the effects of ovality and eccentricity on the overall stress distribution of the casing and the stress distribution at the interface between the casing and cement sheath (i.e., the outer wall of the casing). The research results indicated that when the casing is centered, higher ellipticity is beneficial for improving the casing’s response to non-uniform stress. However, when the casing is eccentric, higher ellipticity significantly increases the non-uniformity of the stress distribution and the risk of stress concentration in the casing. The risk of casing failure increases with increasing non-uniform stress. Additionally, a lower elastic modulus and higher Poisson ratio of the cement can improve the casing’s response to stress. This research result has a certain reference value for implementing high-quality cementing construction and ensuring the normal production of oil and gas wells.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Drilling and Well Engineering · Hydraulic Fracturing and Reservoir Analysis · Oil and Gas Production Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Pipeline and Civil Engineering, China University of Petroleum (East China), Qingdao 266580, China
School of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266580, China
CNPC Tianjin Bo-Xing Engineering Science & Technology Co., Ltd., Tianjin 300451, China
China Oilfield Services Limited, Tianjin 300459, China
Tianjin Key Enterprises Laboratory of Offshore Oil Reserves Exploitation, Tianjin 300459, China
References (21)
Show source-provided references
1. Yu, G.J. (2009). Theoretical Study on Casing Stress and Crush Resistance Strength Under Long-Term Stress Mechanism. [Ph.D. Thesis, China University of Petroleum].
2. Gao, A., and Shi, Y.N. (2017, January 21–22). Discussion on Casing Damage Warning Method in Xingbei Development Area of Daqing Oilfield. Proceedings of the 2017 Oil and Gas Field Exploration and Development International Conference (IFEDC 2017), Chengdu, China.
3. Zhao, C.J. (2021). Deformation Failure Mechanism and Experimental Study of Casing in Multi-Stage Fracturing Wells for Shale Gas. [Ph.D. Thesis, China University of Petroleum].
4. Elasto-plastic Analysis of Wellbore Integrity under Internal Pressure Variation
5. Mei, C.C. (2014). Research on Stress Distribution Inside Casing under the Coupling Conditions of Formation and Cement Ring. [Master’s Thesis, Southwest Petroleum University].
6. An Analytical Approach to the Stress Distribution around a Cased Borehole in an Anisotropic Formation10.1016/j.apm.2022.02.040 ↗
7. Parametric Study of Mechanical Stresses within Cement Sheath in Geothermal Wells10.1016/j.geothermics.2020.102000 ↗
8. Reliability assessment of ultra-deep oil and gas wellbore casing using data statistics and numerical simulations10.1016/j.jlp.2020.104369 ↗
9. Effects of the mechanical properties of a cement sheath and formation on the sealing integrity of the cement-formation interface in shallow water flow in deep water10.1016/j.conbuildmat.2023.130496 ↗
10. Elasticity Solution for the Casing under Linear Crustal Stress10.1016/j.engfailanal.2017.11.007 ↗
11. Closed-form solution of stress state and stability analysis of wellbore in anisotropic permeable rocks10.1016/j.ijrmms.2018.11.002 ↗
12. Numerical investigation of cement interface debonding in deviated shale gas wells considering casing eccentricity and residual drilling fluid10.1016/j.ijrmms.2022.105197 ↗
13. The 3D simulation of the effect of casing standoff on cement integrity by considering the direction of horizontal stresses in one of the wells of Iranian oil fields10.1016/j.petrol.2021.108980 ↗
14. Frictional pressure loss of drilling fluids in a fully eccentric annulus10.1016/j.jngse.2015.07.030 ↗
15. Thermoporoelastic model for the cement sheath failure in a cased and cemented wellbore10.1016/j.petrol.2021.109916 ↗
16. Finite Element Analysis of Casing Stress in Elliptical Wellbore of Collapse-prone Formation
17. Integrity assessment methodology of casing ovality deformation in shale gas wells10.1016/j.geoen.2023.211643 ↗
18. A Semi-Analytical Solution for Mechanical Characteristics of Casing-Cement Ring-Formation in Elliptical Wellbore under Non-Uniform Stress Field
19. Fracture initiation from oval boreholes10.1016/j.petrol.2022.110994 ↗
20. Stress distribution of cased elliptical hole with high fluid pressure: Analytical expression10.1016/j.petrol.2021.109437 ↗
21. Firme, P., Pereira, F.L.G., Roehl, D., and Romanel, C. (2016, January 26–29). A probabilistic assessment of the casing integrity in a Pre-salt wellbore. Proceedings of the 50th US Rock Mechanics/Geomechanics Symposium, One Petro, Houston, TX, USA.