journal article·2024-11-15Open access

Reliability Analysis of High-Pressure Tunnel System Under Multiple Failure Modes Based on Improved Sparrow Search Algorithm–Kriging–Monte Carlo Simulation Method

Yingdong Wang, Chen Xing, Leihua Yao

Applied Sciences· Volume 14· Issue 22

Abstract

It is often difficult for a structural safety design method based on deterministic analysis to fully and reasonably reflect the randomness of mechanical parameters, while the traditional reliability analysis method has a large calculation cost and low accuracy. In this paper, based on the seepage–stress coupling numerical model, the random variables affecting the reliability of the collaborative bearing of surrounding rock and lining structures are successfully identified. Then, the improved sparrow search algorithm (ISSA) is used to optimize the hyper-parameters of the Kriging surrogate model, in order to improve the computational efficiency and accuracy of the reliability analysis model. Finally, the ISSA-Kriging-MCS model is used to quantitatively evaluate the reliability of the surrounding rock-reinforced concrete lining structure under multiple failure modes, and the sensitivity of each random variable is discussed in depth. The results show that the high-pressure tunnel structure has high safety and reliability. The reliability indexes of each failure mode decrease with the increase in the coefficient of variation (COV) of random variables. In addition, the same random variable also exhibits varying degrees of influence in different failure modes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Probabilistic and Robust Engineering Design · Geotechnical Engineering and Analysis · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Beijing Engineering Corporation Limited, Beijing 100024, China

School of Engineering and Technology, China University of Geosciences (Beijing), Beijing 100083, China

References (35)

Show source-provided references
1. Stability analysis of tunnel face reinforced with face bolts10.1007/s11629-023-8400-3 ↗
2. Analysis of stability control and the adapted ways for building tunnel anchors and a down-passing tunnel
3. Reliability of hoek-brown estimates of rock mass properties and their impact on design10.1016/S0148-9062(97)00314-8 ↗
4. On the estimation of scale of fluctuation in geostatistics
5. Reliability analysis of underground tunnel by a novel adaptive kriging based metamodeling approach10.1016/j.probengmech.2022.103351 ↗
6. System reliability assessment for a rock tunnel with multiple failure modes10.1007/s00603-012-0285-3 ↗
7. Reliability analysis of geotechnical infrastructures: Introduction10.1016/j.gsf.2018.01.001 ↗
8. Empirical approach for reliability evaluation of tunnel excavation stability using the q rock mass classification system10.1016/j.undsp.2022.01.001 ↗
9. Reliability analysis of an earth dam under rainfall effects10.1007/s40891-024-00571-1 ↗
10. Application of mcs, grnn, and gpr for performing the reliability analysis of rock slope10.1007/s11069-024-06472-w ↗
11. Uncertainty analysis of pcm-enhanced systems for reliable prediction of thermal capacity using stochastic finite element method10.1016/j.est.2024.111923 ↗
12. Seismic reliability analysis of high earth-rockfill dams subjected to mainshock-aftershock sequences using a novel noninvasive stochastic finite element method10.1016/j.soildyn.2024.108817 ↗
13. Reliability and sensitivity analysis of wedge stability in the abutments of an arch dam using artificial neural network10.1007/s11803-022-2133-0 ↗
14. Hybrid response surface method for system reliability analysis of pile-reinforced slopes10.1016/j.jrmge.2023.12.013 ↗
15. Learnable quantile polynomial chaos expansion: An uncertainty quantification method for interval reliability analysis10.1016/j.ress.2024.110036 ↗
16. Raster data projection transformation based-on kriging interpolation approximate grid algorithm10.1016/j.aej.2020.12.006 ↗
17. Reliability analysis of tunnel using least square support vector machine10.1016/j.tust.2013.11.004 ↗
18. Adaptive kriging-based efficient reliability method for structural systems with multiple failure modes and mixed variables10.1016/j.cma.2019.112649 ↗
19. Cumulative pso-kriging model for slope reliability analysis10.1016/j.probengmech.2014.12.001 ↗
20. Non-probabilistic structural reliability analysis integrating the pso and the kriging model
21. Modeling of main discontinuities of rock tunnel based on optimized kriging interpolation method
22. Yang, Q., Wang, H., Yang, C., Wang, Y., Hu, D., Wang, B., and Duan, B. (2024). Research on surrogate models and optimization algorithms of compressor characteristic based on digital twins. J. Eng. Res.10.1016/j.jer.2024.01.025 ↗
23. Reliability analysis of rock tunnel stability based on interval non-probability under multiple failure modes
24. Reliability based optimization—A safety index approach10.1016/0045-7949(88)90418-X ↗
25. A single-loop approach for system reliability-based design optimization10.1115/1.2779884 ↗
26. Improved sparrow algorithm combining cauchy mutation and opposition-based learning
27. A novel issa–delm model for predicting rock mass permeability
28. A combined radial basis function and adaptive sequential sampling method for structural reliability analysis10.1016/j.apm.2020.08.042 ↗
29. Structural reliability algorithm for Kriging model based on improved learning strategy10.1051/jnwpu/20203820412 ↗
30. Assessing small failure probabilities by ak–ss: An active learning method combining kriging and subset simulation10.1016/j.strusafe.2015.12.003 ↗
31. Ak-mcs: An active learning reliability method combining kriging and monte carlo simulation10.1016/j.strusafe.2011.01.002 ↗
32. Cq2rs: A new statistical approach to the response surface method for reliability analysis10.1016/S0167-4730(02)00045-0 ↗
33. Structural reliability assessment based on particles swarm optimization10.1016/j.strusafe.2004.10.003 ↗
34. Unified Design Standard for Reliability of Hydraulic Engineering Structures (Standard No. GB-50199-94). Available online: https://www.chinesestandard.net/PDF/English.aspx/GB50199-1994.
35. Identification of primary failure modes of tunnel system and influence of supporting structures on tunnel system reliability using multiple response surfaces10.1007/s12205-022-1924-1 ↗