Variability of fatigue parameters under uniaxial loading in the function of the number of cycles to failure
Source abstract
Abstract
Abstract This paper presents the problems relating to the determination of the material constants and their assessment. The study demonstrated that the scatter of the values of the fatigue life and stresses applied for determination of the σa-Nf characteristics could have an effect on the coefficient m representing the slope of this characteristics. The phenomenon associated with the variability of a number of material parameters relating to the number of cycles to failure is discussed. In addition, the paper reports on the influence of the number of cycles to failure on the value of the notch factor. The paper also discusses the function accounting for the effect of the geometrical KW and structural KS notches based on the relation stating the dependence of Kf coefficient on the number of cycle to failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · Structural Engineering and Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Analysis of revised fatigue life calculation algorithm under proportional and non-proportional loading with constant amplitude10.1016/j.ijfatigue.2016.03.027 ↗
2. Zhu S-P, Yu Z-Y, Correia J, De Jesus A, Berto F. Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials. Int J Fatigue n.d. http://doi.org/10.1016/j.ijfatigue.2018.03.028.10.1016/j.ijfatigue.2018.03.028 ↗
3. Low-cycle multiaxial fatigue behaviour and fatigue life prediction for CuZn37 brass using the stress-strain models10.1016/j.ijfatigue.2017.04.011 ↗
4. On the fatigue reliability evaluation of structural components under service loading10.1016/S0142-1123(01)00021-4 ↗
5. Estimating S-N curves and their scatter using a differential ant-stigmergy algorithm10.1016/j.ijfatigue.2012.02.015 ↗
6. The influence of cyclic stress intensity threshold on fatigue life scatter10.1016/j.ijfatigue.2015.10.006 ↗
7. Microstructural influence on the scatter in the fatigue life of steel reinforcement bars10.1016/j.ijfatigue.2015.01.016 ↗
8. ASTM E 739-91, 1998. Standard practice for Statistical analysis of linearized stress-life (S-N) and strain-life (ε-N) fatigue data. 710.
9. Comparison of fatigue characteristics of some selected materials10.3139/120.110529 ↗
10. Lifetime of semi-ductile materials through the critical plane approach10.1016/j.ijfatigue.2013.11.019 ↗
11. Estimation of fatigue life under multiaxial loading by varying the critical plane orientation10.1016/j.ijfatigue.2016.10.028 ↗
12. Including of ratio of fatigue limits from bending and torsion for estimation fatigue life under cyclic loading10.1016/j.mspro.2016.03.006 ↗
13. Fatigue life of aluminium alloy 6082 T6 under constant and variable amplitude bending with torsion10.15632/jtam-pl.53.2.421 ↗
14. Kurek M, Vantadori S. Estimation of fatigue life of selected construction materials under cyclic loading. Fract Struct Integr 2015:302–8. http://doi.org/10.3221/IGF-ESIS.33.34.10.3221/IGF-ESIS.33.34 ↗
15. Ronchei C, Carpinteri A, Fortese G, Spagnoli A, Vantadori S, Kurek M, et al. Life estimation by varying the critical plane orientation in the modified Carpinteri-Spagnoli criterion. Fract Struct Integr 2015 http://doi.org/10.3221/IGF-ESIS.34.07.10.3221/IGF-ESIS.34.07 ↗
16. Baumel · 1987
17. Baumel · 1990
18. Energy models for fatigue life estimation under uniaxial random loading. Part I: The model elaboration10.1016/S0142-1123(01)00016-0 ↗
19. Energy models for fatigue life estimation under uniaxial random loading. Part II: Verification of the model10.1016/S0142-1123(01)00017-2 ↗
20. Mroziński S. Weryfikacja analitycznego opisu pętli histerezy. In: XIX Symp Zmęczenie Mech Pękania Pieczyska K Bydg 2002:259–66.
21. The fatigue characteristics of materials with the controlled strain energy density parameter
22. Mathematical model for modelling for the cyclic hardening/softening transient response of metallic materials
23. Fatigue in steel structures under random loading10.1016/S0143-974X(99)00042-5 ↗
24. Nominal stress range fatigue of stainless steel fillet welds—the effect of weld size10.1016/S0143-974X(99)00056-5 ↗
25. Influence of cyclic loads below endurance limit or threshold stress intensity on fatigue damage in cast aluminium alloy 319–T710.1016/j.ijfatigue.2004.06.004 ↗
26. Strain-controlled tests for determining the changes in the fatigue parameters of materials10.1007/s11003-007-0057-5 ↗
27. On the fatigue notch factor Kf10.1016/0142-1123(95)93538-D ↗
28. Susmel · 2009
29. Neuber · J Appl Mech ASME · 1961 · 28 · 54410.1115/1.3641780 ↗
30. Peterson RE. Notch-sensitivity. In: Sines G, editor. Met fatigue. McGraw-Hill 1959:293–306.
31. Stress concentration factors relating theoretical and practical factors in fatigue loading
32. Słowik · 2008
33. A new approach to the prediction of fatigue notch reduction factor k f10.1016/0142-1123(95)00056-9 ↗
34. Zmęczeniowy współczynnik działania karbu w funkcji liczby cykli do zniszczenia
35. Jednoczesne uwzględnienie karbów geometrycznych i strukturalnych w złączu spawanym
36. Geometrical effects in fatigue: a unifying theoretical model10.1016/S0142-1123(99)00007-9 ↗
37. A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime10.1111/j.1460-2695.2007.01122.x ↗
38. Modified Wöhler curve method, theory of critical distances and Eurocode 3: a novel engineering procedure to predict the lifetime of steel welded joints subjected to both uniaxial and multiaxial fatigue loading10.1016/j.ijfatigue.2007.06.005 ↗
39. Non-local line method for notched elements with use of effective length calculated in an elasto-plastic condition10.1111/ffe.12478 ↗