Multiscale Characterization of Fractures and Analysis of Key Controlling Factors for Fracture Development in Tight Sandstone Reservoirs of the Yanchang Formation, SW Ordos Basin, China
Source abstract
Abstract
Tight sandstone reservoirs, despite their low porosity and permeability, present considerable exploration potential as unconventional hydrocarbon resources. Natural fractures play a crucial role in hydrocarbon migration, accumulation, and present engineering challenges such as late-stage reformation in these reservoirs. This study examines fractures in the seventh member of the Triassic Yanchang Formation’s tight sandstone within the Ordos Basin using a range of methods, including field outcrops, core samples, imaging and conventional logging, thin sections, and scanning electron microscopy. The study clarifies the characteristics of fracture development and evaluates the relationship between dynamic and static rock mechanics parameters, including the calculation of the brittleness index. Primary factors influencing fracture development were quantitatively assessed through a combination of outcrop, core, and mechanical test data. Findings reveal that high-angle structural fractures are predominant, with some bedding and diagenetic fractures also present. Acoustic, spontaneous potential, and caliper logging, in conjunction with imaging data, enabled the development of a comprehensive probabilistic index for fracture identification, which produced favorable results. The analysis identifies four key factors influencing fracture development: stratum thickness, brittleness index, lithology, and rock mechanical stratigraphy. Among these factors, stratum thickness is negatively correlated with fracture development. Conversely, the brittleness index positively correlates with fracture development and significantly influences fracture length, aperture, and linear density. Fractures are most prevalent in siltstone and fine sandstone, with minimal development in mudstone. Different rock mechanics layer types also impact fracture development. These insights into fracture characteristics and controlling factors are anticipated to enhance exploration efforts and contribute to the study of similar unconventional reservoirs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrocarbon exploration and reservoir analysis · Hydraulic Fracturing and Reservoir Analysis · Seismic Imaging and Inversion Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Earth Resources, China University of Geosciences, Wuhan 430074, China
Key Laboratory of Tectonics and Petroleum Resources, Ministry of Education, China University of Geosciences, Wuhan 430074, China
Funding
National Major Science and Technology Projects of China
References (58)
Show source-provided references
1. Dorhjie, D.B., Mukhina, E., Kasyanenko, A., and Cheremisin, A. (2023). Tight and Shale Oil Exploration: A Review of the Global Experience and a Case of West Siberia. Energies, 16.10.3390/en16186475 ↗
2. Experimental investigation on the influence factors of primary production performance of tight oil10.1080/10916466.2022.2038621 ↗
3. Tang, Y., Lv, Z.X., He, W.J., Qing, Y.H., Song, X.Z., Cao, Q.M., Qian, Y.X., Zhu, T., Li, N., and Li, X. (2022). Characteristics and Genesis of Alkaline Lacustrine Tight Oil Reservoirs in the Permian Fengcheng Formation in the Mahu Sag, Junggar Basin, NW China. Minerals, 12.10.3390/min12080979 ↗
4. Experimental Study on Porosity & Permeability Characteristics of Typical Tight Oil Reservoirs10.1007/s10553-024-01659-0 ↗
5. Insights into the mechanical stratigraphy and vertical fracture patterns in tight oil sandstones: The Upper Triassic Yanchang Formation in the eastern Ordos Basin, China10.1016/j.petrol.2022.110247 ↗
6. Characteristics and exploration targets of Chang 7 shale oil in Triassic Yanchang Formation, Ordos Basin, NW China10.1016/S1876-3804(23)60435-5 ↗
7. Microfacies and diagenetic alteration in a semi-deep to deep lacustrine shale: The Yanchang Formation in the Ordos Basin, China10.1016/j.petsci.2023.12.024 ↗
8. Wang, L.Y., and Li, S.H. (2024). Geological Modeling of Shale Oil in Member 7 of the Yanchang Formation, Heshui South Area, Ordos Basin. Appl. Sci., 14.10.3390/app14156602 ↗
9. Study on pore structure and permeability sensitivity of tight oil reservoirs10.1016/j.energy.2023.129632 ↗
10. Physical and numerical simulation of inter-fracture flooding in heterogeneous tight oil reservoirs10.1016/j.egyr.2022.09.194 ↗
11. Qu, G.Z., Su, J., Zhao, M., Bai, X.J., Yao, C.J., and Peng, J. (2022). Optimizing Composition of Fracturing Fluids for Energy Storage Hydraulic Fracturing Operations in Tight Oil Reservoirs. Energies, 15.10.3390/en15124292 ↗
12. Hao, L.W., Ma, X.F., Gao, W.Q., Ren, Z.C., Tao, H.F., and Huang, W.K. (2022). Geochemical Characteristics of the Chang 7 Source Rocks of the Triassic Yanchang Formation in Ordos Basin, China: Implications for Organic Matter Accumulation and Shale Oil Potential. Energies, 15.10.3390/en15207815 ↗
13. Wang, S.L., Li, H., Lin, L.F., and Yin, S. (2022). Development Characteristics and Finite Element Simulation of Fractures in Tight Oil Sandstone Reservoirs of Yanchang Formation in Western Ordos Basin. Front. Earth Sci., 9.10.3389/feart.2021.823855 ↗
14. Characteristics and control factors of feldspar dissolution in gravity flow sandstone of Chang 7 Member, Triassic Yanchang Formation, Ordos Basin, NW China10.1016/S1876-3804(24)60009-1 ↗
15. Chen, Z.J., Ji, A.Z., and Yuan, Y.D. (2022). Fine Logging Evaluation of Fractures in Continental Tight Oil Sandstone Reservoirs of Yanchang Formation in the Ordos Basin. Front. Earth Sci., 10.10.3389/feart.2022.860473 ↗
16. Geophysical logging in brittleness evaluation on the basis of rock mechanics parameters: A case study of sandstone of Shanxi formation in Yanchang gas field, Ordos Basin10.1007/s13202-022-01542-w ↗
17. Fractured Zone Detection Using Petrophysical Logs by Rescaled Windowed R/S Analyses and Discrete Fracture Network (DFN) of Yanchang Formation in Mahuangshan-Hongliugou Area, Ordos Basin, China10.1155/2023/9255499 ↗
18. Evaluation of fractures using conventional and FMI logs, and 3D seismic interpretation in continental tight sandstone reservoir10.1515/geo-2022-0372 ↗
19. He, S.B., Meng, K., Wang, C., Chen, Y.B., Zhao, H., Wang, H.Y., and Yu, H.Y. (2023). Fracture Identification Using Conventional Logs in Ultra-Low Permeability Sandstone Reservoirs: A Case Study of the Chang 6 Member of the Ordos Basin, China. Minerals, 13.10.3390/min13020297 ↗
20. Integrated fracture characterization of Asmari reservoir in Haftkel field10.1007/s13202-021-01435-4 ↗
21. Characterization of natural fractures in deep-marine shales: A case study of the Wufeng and Longmaxi shale in the Luzhou Block Sichuan Basin, China10.1007/s11707-022-1021-2 ↗
22. Xue, Y.C., Wang, L.J., Zhao, X.L., and Tian, H. (2022). The Fractured Model Study of Low-Permeability Reservoir in Xinli Oil Field. Front. Earth Sci., 10.10.3389/feart.2022.841456 ↗
23. Microscopic characteristics of pore-fracture system in lacustrine shale from Dongying Sag, Bohai Bay Basin, China: Evidence from scanning electron microscopy10.1016/j.marpetgeo.2023.106156 ↗
24. Nanoindentation investigation of mechanical and creep properties of continental Triassic Yanchang Formation shale, Ordos Basin
25. Evaluation of pore-scale wettability in the tight sandstone reservoirs of the Upper Triassic Yanchang Formation, Ordos Basin, China10.1016/j.marpetgeo.2022.105528 ↗
26. Oil generated overpressure of shale and its effect on tight sandstone oil enrichment: A case study of Yanchang Formation in the Ordos Basin, China10.1016/j.petrol.2022.111120 ↗
27. Differences and origins of hydrocarbon generation characteristics between mudstone and shale in the Seventh Member of the Yanchang Formation, Ordos Basin, China10.1016/j.coal.2022.104012 ↗
28. Formation water geochemistry and the petroleum geological significance in Yanchang Formation of Wuqi Oilfield, Ordos Basin, China10.1504/IJOGCT.2023.127353 ↗
29. Fu, Z., Lu, S.F., and Wang, H.J. (2023). A new method for identifying micro fractures and characterizing fractures of different scales. Front. Earth Sci., 10.10.3389/feart.2022.1018106 ↗
30. Microscopic characteristics of tight sandstone reservoirs and their effects on the imbibition efficiency of fracturing fluids: A case study of the Linxing area, Ordos Basin10.1016/j.engeos.2024.100302 ↗
31. Evolution of tensile fractures in feldspar porphyroclast and its implication in paleostress estimation10.1016/j.jsg.2023.105039 ↗
32. An intelligent prediction method of fractures in tight carbonate reservoirs10.1016/S1876-3804(23)60355-6 ↗
33. Carbonate fractures from conventional well log data, Kometan Formation, Northern Iraq case study10.1016/j.jappgeo.2022.104810 ↗
34. Multiple linear regression and gene expression programming to predict fracture density from conventional well logs of basement metamorphic rocks10.1007/s13202-024-01800-z ↗
35. Quantification of rock heterogeneity and application in predicting rock mechanical properties10.1007/s10064-023-03417-8 ↗
36. Effect of natural fractures on mechanical properties and fracture patterns of shale at microscopic scale: An example from the Lower Cambrian Niutitang formation in Qianbei region10.1007/s40948-024-00743-3 ↗
37. Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance10.1007/s00603-024-03994-4 ↗
38. (2024, October 22). Available online: https://openstd.samr.gov.cn/bzgk/gb/newGbInfo?hcno=037A6660E50EAAFC966E598146286715.
39. (2024, October 22). Available online: https://openstd.samr.gov.cn/bzgk/gb/newGbInfo?hcno=59A5D1BC04922E03C10E620FD8789057.
40. Zhang, R., Sun, J.M., Cheng, Z.G., Xin, B.X., and Chen, H. (2022). Mechanical Behavior and Microstructural Characteristics of Ultradeep Tight Carbonate Rocks With Different Burial Depths. Front. Earth Sci., 10.10.3389/feart.2022.858899 ↗
41. Study on Local Brittleness of Rock Based on Multiple Linear Regression Method: Case Study of Shahejie Formation10.1155/2023/6189068 ↗
42. Assessment method for determining rock brittleness based on statistical damage constitutive relations10.1016/j.gete.2023.100517 ↗
43. A New Rock Brittleness Index Based on the Peak Elastic Strain Energy Consumption Ratio10.1007/s00603-021-02738-y ↗
44. The Analysis of the Fracturing Mechanism and Brittleness Characteristics of Anisotropic Shale Based on Finite-Discrete Element Method10.1007/s00603-023-03672-x ↗
45. A new approach to mechanical brittleness index modeling based on conventional well logs using hybrid algorithms10.1007/s12145-023-01098-1 ↗
46. Brittleness index evaluation of gas-bearing sandstone under triaxial compression conditions10.1007/s40948-023-00713-1 ↗
47. Extracting Rock Parameters Through Digital Drilling Test10.1007/s00603-024-03951-1 ↗
48. Experimental test and numerical simulation of the effect of brittleness on the microfracturing of sandstone10.1007/s10064-022-02776-y ↗
49. Estimation of Brittleness Indexes from Petrographic Characteristics of Different Sandstone Types (Cenozoic and Mesozoic Sandstones), Markazi Province, Iran10.1007/s00603-021-02441-y ↗
50. A new brittleness index based on crack characteristic stress and its engineering applications10.1016/j.enggeo.2024.107411 ↗
51. Mechanical properties and brittleness characteristics of sandstone from different burial depths10.1007/s40948-022-00470-7 ↗
52. Wang, Z.S., Xiang, H., Wang, L.B., Xie, L., Zhang, Z.G., Gao, L.F., Yan, Z.F., and Li, F.L. (2022). Fracture Characteristics and its Role in Bedrock Reservoirs in the Kunbei Fault Terrace Belt of Qaidam Basin, China. Front. Earth Sci., 10.10.3389/feart.2022.865534 ↗
53. Identification and evaluation of fault-fracture reservoirs in buried hills of the Lower Paleozoic, Chengdao area, China10.1016/j.engeos.2023.100183 ↗
54. Identification and parameter characterization of pores and fractures in shales based on multi-scale digital core data10.46690/ager.2024.08.08 ↗
55. Zhang, Y.H., Ma, J.F., Wang, Y., Wang, F., Li, X., and Zhao, L.X. (2022). Quantification of the Fracture Complexity of Shale Cores After Triaxial Fracturing. Front. Earth Sci., 10.10.3389/feart.2022.863773 ↗
56. Study on Microscopic Characteristics of Spatial Distribution of Fractures in Deteriorated Sandstone10.1155/2022/7895498 ↗
57. Developing a relationship between static Young’s modulus and seismic parameters10.1007/s13202-022-01546-6 ↗
58. Experimental investigation on brittleness characteristics of rock based on the ubiquitiformal complexity: Strain rate effect and size effect10.1007/s10064-023-03327-9 ↗