Microstructure sensitivity of the low cycle fatigue crack initiation mechanisms for the Al0.3CoCrFeNi high entropy alloy: in-situ SEM study and crystal plasticity simulation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
2. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
3. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
4. Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy10.1016/j.msea.2019.138620 ↗
5. Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy10.1016/j.msea.2017.02.043 ↗
6. High cycle fatigue deformation mechanisms of a single phase CrMnFeCoNi high entropy alloy10.1016/j.msea.2020.139034 ↗
7. Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures10.1016/j.msea.2019.138424 ↗
8. Work hardening of polycrystalline Cu with nanoscale twins10.1016/j.scriptamat.2011.12.046 ↗
9. Twin boundaries: controllable interface to fatigue cracking10.1016/j.jmst.2017.03.022 ↗
10. Fatigue behavior of ultrafine grained triplex Al0.3CoCrFeNi high entropy alloy10.1016/j.scriptamat.2018.08.048 ↗
11. Effect of heat treatment on the phase evolution and mechanical properties of atomized AlCoCrFeNi high-entropy alloy powders10.1016/j.jallcom.2019.06.301 ↗
12. Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys10.1016/j.actamat.2012.06.046 ↗
13. Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy10.1016/j.actamat.2015.07.004 ↗
14. Planar slip-driven fatigue crack initiation and propagation in an equiatomic CrMnFeCoNi high-entropy alloy10.1016/j.ijfatigue.2019.105418 ↗
15. Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study: Influence of orientation and temperature10.1016/j.ijfatigue.2020.105739 ↗
16. Effects of secondary orientation on crack closure behavior of nickel-based single crystal superalloys10.1016/j.ijfatigue.2015.11.004 ↗
17. Hierarchical microstructure for improved fatigue properties in a eutectic high entropy alloy10.1016/j.scriptamat.2018.07.022 ↗
18. Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi10.1016/j.scriptamat.2020.113667 ↗
19. Uncovering the critical factor governing the fatigue crack propagation under the coexistence of multi-interfaces in AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.engfracmech.2021.108132 ↗
20. Study on crack growth and fatigue life in TC6 titanium alloy by integrated phase proportion and grain size modeling10.1016/j.engfracmech.2020.107235 ↗
21. Influence of grain size on the small fatigue crack initiation and propagation behaviors of a nickel-based superalloy at 650 °C10.1016/j.jmst.2019.03.023 ↗
22. Experimental and modeling study on small fatigue crack initiation and propagation behavior of Inconel 61710.1016/j.ijfatigue.2022.107158 ↗
23. A review on the fatigue cracking of twin boundaries: crystallographic orientation and stacking fault energy10.1016/j.pmatsci.2022.101011 ↗
24. Effect of grain size on fatigue cracking at twin boundaries in a CoCrFeMnNi high-entropy alloy10.1016/j.jmst.2019.09.010 ↗
25. Effect of grain size on the low-cycle fatigue behavior of carbon-containing high-entropy alloys10.1016/j.msea.2021.140985 ↗
26. Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi10.1016/j.intermet.2017.05.009 ↗
27. Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2019.04.234 ↗
28. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
29. Enhanced synergy of strength-ductility and low-cycle fatigue resistance of high-entropy alloy through harmonic structure design10.1016/j.scriptamat.2022.114591 ↗
30. Superior strength-ductility synergy and fatigue resistance of heterogeneous structured AZ41 Mg alloy by laser surface processing10.1016/j.msea.2022.144151 ↗
31. Temperature-dependent fatigue response of a Fe44Mn36Co10Cr10 high entropy alloy: a coupled in-situ electron microscopy study and crystal plasticity simulation10.1016/j.ijfatigue.2021.106385 ↗
32. In-situ observations of the effects of orientation and carbide on low cycle fatigue crack propagation in a single crystal superalloy10.1016/j.proeng.2010.03.245 ↗
33. Fatigue cracking at twin boundaries: effects of crystallographic orientation and stacking fault energy10.1016/j.actamat.2012.02.016 ↗
34. Benefit or harm of accident tolerant coatings on the low-cycle fatigue properties of Zr-4 cladding alloy: in-situ studies at 400°C10.1016/j.jnucmat.2020.152651 ↗
35. In situ study on plastic deformation mechanism of Al0.3CoCrFeNi high-entropy alloys with different microstructures10.1016/j.msea.2022.144134 ↗
36. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
37. Bounds and self-consistent estimates for creep of polycrystalline materials
38. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
39. Micromechanics of crystals and polycrystals10.1016/S0065-2156(08)70242-4 ↗
40. Huang Y. A user-material subroutine incorporating single crystal plasticity in the ABAQUS finite element program; 1991.
41. Microstructure-based fatigue modelling with residual stresses: prediction of the microcrack initiation around inclusions10.1016/j.msea.2019.02.058 ↗
42. Huang Y. A user-material subroutine incorporating single crystal plasticity in the Abaqus finite element program. MEClHI-178; 1991.06.
43. EBSD analysis of creep deformation induced grain lattice distortion: a new method for creep damage evaluation of austenitic stainless steels10.1016/j.msea.2018.07.058 ↗
44. Stress gradient plasticity theory development for cyclic and monotonic loading of thin-walled structures: back-stress, size effect, passivation effect10.1016/j.tws.2022.109911 ↗
45. Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 71810.1016/j.msea.2019.05.007 ↗
46. Activation volume and strain rate sensitivity in plastic deformation of nanocrystalline Ti10.1016/j.surfcoat.2012.05.130 ↗
47. In situ SEM studies of the low cycle fatigue behavior of DZ4 superalloy at elevated temperature: effect of partial recrystallization10.1016/j.ijfatigue.2013.11.001 ↗
48. Wise C.M. TEM study of dislocation array/high angle grain boundaries interaction in type 304 stainless steel; 1986.10.1017/S0424820100144401 ↗
49. Dislocation and grain boundaries interactions in metals10.1016/0001-6160(88)90058-2 ↗
50. Microstructure-based intergranular fatigue crack nucleation model: dislocation transmission versus grain boundaries cracking10.1016/j.jmps.2023.105233 ↗
51. On the unified view of the contribution of plastic strain to cyclic crack initiation: Impact of the progressive transformation of shear bands to persistent slip lines10.1016/j.actamat.2014.11.020 ↗
52. Fundamental aspects of low amplitude cyclic deformation in face-centred cubic crystals10.1016/0079-6425(92)90006-S ↗
53. Enhanced fatigue resistance of a face-centered-cubic single-phase Al0.3CoCrFeNi high-entropy alloy through planar deformation characteristic10.1016/j.msea.2022.144499 ↗
54. Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures10.1016/j.mattod.2019.03.001 ↗
55. Effects of laser shock peening on the mechanisms of fatigue short crack initiation and propagation of AA7075-T65110.1016/j.ijfatigue.2020.106025 ↗
56. Fatigue crack initiation behaviors around defects induced by welding thermal cycle in superalloy IN617B10.1016/j.ijfatigue.2022.106745 ↗
57. In-situ SEM and EBSD study on fretting fatigue crack initiation of a directionally solidified Ni-based superalloy10.1016/j.ijfatigue.2022.106908 ↗
58. Fatigue short crack growth, model and EBSD characterization of marine steel welding joint10.1016/j.ijfatigue.2021.106689 ↗
59. Correlations between two EBSD-based metrics Kernel Average Misorientation and Image Quality on indicating dislocations of near-failure low alloy steels induced by tensile and cyclic deformations10.1016/j.mtcomm.2021.102445 ↗
60. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
61. Development of a flow localization band and texture in a forged near-α titanium alloy10.3390/met10010121 ↗
62. Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: lamellar colonies evolution and tensile properties10.1016/j.matdes.2017.02.053 ↗
63. EBSD analysis of cyclic load effect on final misorientation distribution of post-mortem low alloy steel: a new method for fatigue crack tip driving force prediction10.1016/j.ijfatigue.2018.04.016 ↗
64. Crystal orientation effect on fretting fatigue induced geometrically necessary dislocation distribution in Ni-based single-crystal superalloys10.1016/j.actamat.2019.08.035 ↗
65. Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy10.1016/j.jallcom.2008.12.088 ↗
66. Formation of ultrafine-grained microstructure in Al0.3CoCrFeNi high entropy alloys with grain boundaries precipitates10.1016/j.matlet.2017.04.072 ↗
67. Transfer of dislocation slip through grain boundaries in metal-graphene nanocomposites10.1016/j.ijsolstr.2022.111515 ↗
68. Dislocation interactions at the grain boundaries in FCC bicrystals: an atomistically-informed dislocation dynamics study10.1016/j.actamat.2021.117455 ↗
69. Mechanical response of dislocation interaction with grain boundaries in ultrafine-grained interstitial-free steel10.1016/j.actamat.2021.116621 ↗
70. Microstructure design and mechanical properties of grain-gradient graphene/aluminum composites10.1016/j.engfracmech.2022.108944 ↗
71. Crystal cracking of grain-gradient aluminum by a combined CPFEM-CZM method10.1016/j.engfracmech.2020.107507 ↗
72. Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selected laser melting: crystal plasticity modeling10.1016/j.ijfatigue.2020.106109 ↗
73. Numerical study of inclusion parameters and their influence on fatigue lifetime10.1016/j.ijfatigue.2018.01.036 ↗
74. Experimental and computational investigation of weathering steel Q450NQR1 under high cycle fatigue loading via crystal plasticity finite element method10.1016/j.ijfatigue.2022.106772 ↗
75. Investigations of micro-notch effect on small fatigue crack initiation behaviour in nickel-based alloy GH4169: experiments and simulations10.1016/j.ijfatigue.2020.105578 ↗
76. An investigation of geometrically necessary dislocations and back stress in large grained tantalum via EBSD and CPFEM10.1016/j.msea.2019.138704 ↗
77. On the alignment of 3D EBSD data collected by serial sectioning technique10.1016/j.matchar.2019.04.026 ↗
78. Fatigue crack growth behavior of the quaternary 3d transition metal high entropy alloy CoCrFeNi10.1016/j.ijfatigue.2021.106232 ↗
79. Effect of secondary orientation on notch-tip plasticity in superalloy single crystals10.1016/j.ijplas.2011.06.003 ↗
80. Crystal plasticity analysis of cylindrical indentation on a Ni-base single crystal superalloy10.1016/j.ijplas.2013.05.004 ↗
81. Interaction between a notch and cylindrical voids in aluminum single crystals: experimental observations and numerical simulations10.1016/j.jmps.2012.12.002 ↗
82. Evolution of plasticity in notched Ni-base superalloy single crystals10.1016/j.ijsolstr.2009.04.006 ↗
83. Competition mechanism of brittle-ductile transition of metals under tensile condition10.1016/j.mechmat.2019.103138 ↗
84. A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels10.1016/j.ijplas.2022.103249 ↗
85. Deformation mechanism of ferrite in a low carbon Al-killed steel: slip behavior, grain boundaries evolution and GND development10.1016/j.msea.2022.143093 ↗
86. Experimental investigation of dislocation-grain boundaries interaction in coarse-grained high-manganese steels using quasi in situ electron channelling contrast imaging10.1016/j.matchar.2022.112545 ↗
87. Ma XF, Zhai HL, Zuo L, Zhang WJ, Rui SS, Han QN, et al. Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study: influence of orientation and temperature.
88. Multiscale analyses of the interaction between dislocation and Σ9 symmetric tilt grain boundaries in Fe–Si bicrystals by nanoindentation technique10.1016/j.ijplas.2021.103047 ↗
89. Dislocation–grain boundaries interaction-based discrete dislocation dynamics modeling and its application to bicrystals with different misorientations10.1016/j.actamat.2020.10.052 ↗