Mixed mode fatigue crack growth behavior of Ni-Cr-Mo-V high strength steel weldments
Source abstract
Abstract
Abstract The extensive use of Ni-Cr-Mo-V high strength steels in modern marine environment poses increasing requirements for accurate characterization of the fatigue crack growth (FCG) behavior of their welded joints. The present work reported a study on a new generation Ni-Cr-Mo-V high strength steel concerning the mixed mode FCG behavior of its welded joint. Effects of microstructure and welding residual stresses (WRSs) were emphasized. It was found that the 4% compliance offset criterion in the conventional ASTM procedure and the 10% offset criterion in the normalized ASTM procedure were suitable for determination of the crack opening force of high strength steel weldments. A new effective stress intensity factor range parameter as the crack growth driving force was proposed, which yielded fairly good correlation for the mixed mode FCG data. Acicular ferrite with basket-weave microstructure in the weld metal exhibited favorable crack growth resistance relative to the base material and was preferred to the welded joints. The attained master or intrinsic FCG curves for the base material and the weld metal on the basis of the proposed parameter provided a basic database for the design of high strength steels employed in modern marine structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Fatigue crack growth rates for offshore wind monopile weldments in air and seawater: SLIC inter-laboratory test results10.1016/j.matdes.2016.10.070 ↗
2. Numerical simulation of residual stress in 10Ni5CrMoV steel weldments10.1016/j.jmatprotec.2016.09.011 ↗
3. Ashby · 2011
4. Mixed-mode fatigue crack growth behavior of fully lower bainite steel10.1016/j.msea.2013.05.065 ↗
5. Cracks on mixed mode loading – theories, experiments, simulations10.1016/j.ijfatigue.2013.06.019 ↗
6. The mixed-mode investigation of the fatigue crack in CTS metallic specimen10.1016/j.ijfatigue.2006.01.005 ↗
7. Assessment of mixed mode loading on macroscopic fatigue crack paths in thick section Al–Cu–Li alloy plate10.1016/j.matdes.2015.12.116 ↗
8. A loading device for the creation of mixed mode in fracture mechanics10.1007/BF00942726 ↗
9. Mixed mode fatigue crack growth: a literature survey10.1016/S0013-7944(96)00071-9 ↗
10. Fatigue crack growth behavior of rail steel under mode I and mixed mode loadings10.1016/S0921-5093(02)00052-7 ↗
11. Fatigue crack growth studies under mixed-mode loading10.1016/S0142-1123(01)00146-3 ↗
12. Mixed-mode fatigue crack growth behaviour in aluminium alloy10.1016/j.ijfatigue.2005.07.047 ↗
13. Numerical analysis of retained residual stresses in C(T) specimen extracted from a multi-pass austenitic weld and their effect on crack growth10.1016/j.engfracmech.2014.04.008 ↗
14. Size effects on residual stress and fatigue crack growth in friction stir welded 2195–T8 aluminium – Part II: modelling10.1016/j.ijfatigue.2011.05.008 ↗
15. Fatigue crack propagation behaviour in wire+arc additive manufactured Ti-6Al-4V: effects of microstructure and residual stress10.1016/j.matdes.2015.10.141 ↗
16. Weld residual stress effects on fatigue crack growth behaviour of aluminium alloy 2024-T35110.1016/j.ijfatigue.2008.05.008 ↗
17. The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints10.1016/S0142-1123(02)00038-5 ↗
18. Analysis of residual stress relief mechanisms in post-weld heat treatment10.1016/j.ijpvp.2014.06.002 ↗
19. The effect of stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 aluminum
20. A fatigue crack driving force parameter with load ratio effects10.1016/S0142-1123(01)00158-X ↗
21. Effect of superimposed monotonic fracture modes on the ΔK and Kmax parameters of fatigue crack propagation10.1016/S1359-6454(03)00159-9 ↗
22. The significance of fatigue crack closure
23. Fatigue crack growth and closure behaviour through a compressive residual stress field10.1111/j.1460-2695.1990.tb00572.x ↗
24. Mechanical properties and fatigue crack growth rates in friction stir welded nugget of 2198-T8 Al-Li alloy joints10.1016/j.msea.2013.01.044 ↗
25. A. International, Standard Test Method for Measurement of Fatigue Crack Growth Rates. In: ASTM International, United States; 2008.
26. Results of the second round robin on opening-load measurement conducted by ASTM task group E24.04.04 on crack closure measurement and analysis
27. Measuring fatigue crack growth and closure in Polyether Ether Ketone (PEEK)10.1016/j.ijfatigue.2016.10.025 ↗
28. Applicability of the ASTM compliance offset method to determine crack closure levels for structural steel10.1016/j.ijfatigue.2006.11.004 ↗
29. Introducing the compliance ratio concept for determining effective stress intensity10.1016/S0142-1123(97)00024-8 ↗
30. Proposal of modified (normalized) ASTM offset method for determination of fatigue crack opening load10.1016/j.ijfatigue.2004.06.014 ↗
31. BSI. Guide to methods for assessing the acceptability of flaws in metallic structures. In: BSI, London; 2013.
32. H.A. Richard, Bruchvorhersagen bei u¨berlagerter normal- und schubbeanspruchung von risen VDI Forschungsheft 631, Du¨sseldorf: VDI-Verlag, (1985) 1–60.
33. Determination of stress intensity factor for mode I fatigue crack based on finite element analysis10.1016/j.engfracmech.2015.02.019 ↗
34. Mechanisms of mixed mode fatigue crack propagation at rail butt-welds10.1016/j.ijfatigue.2005.07.044 ↗
35. On the use of isoparametric finite elements in fracture mechanics10.1002/nme.1620100103 ↗
36. Fatigue crack growth under mixed-mode I and II loading10.1111/j.1460-2695.1996.tb00950.x ↗
37. Microstructural mechanisms controlling fatigue crack growth in Al–Si–Mg cast alloys10.1016/j.msea.2006.08.130 ↗
38. Fatigue crack propagation from a crack inclined to the cyclic tensile axis10.1016/0013-7944(74)90007-1 ↗
39. Rate of growth of fatigue cracks calculated from the theory of infinitesimal dislocations distributed on a plane10.1007/BF00183823 ↗
40. Mixed mode fatigue crack growth prediction in biaxially stretched sheets10.1016/0013-7944(92)90115-U ↗
41. Effect of residual stresses on fatigue crack growth in steel weldments under constant and variable amplitude load
42. The influence of applied stress, crack length, and stress intensity factor on crack closure10.1007/BF02667369 ↗
43. Finite element analysis of plasticity-induced fatigue crack closure: an overview10.1016/S0013-7944(03)00099-7 ↗
44. Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X75010.1016/j.msea.2016.02.022 ↗
45. Mixed mode fatigue crack propagation in a railway wheel steel10.1016/j.prostr.2016.02.021 ↗
46. Crack tip driving forces and crack growth representation under fatigue10.1016/S0142-1123(03)00105-1 ↗
47. An evaluation of DKeff estimation procedures on 6061-T6 and 2024-T3 aluminum alloys10.1016/S0142-1123(99)00055-9 ↗
48. Fatigue crack growth in austempered ductile and grey cast irons-stress ratio in air and mine water10.1016/S0921-5093(98)01140-X ↗
49. Effect of load ratio on fatigue crack growth in the near-threshold regime: a literature review, and a combined crack closure and driving force approach10.1016/j.engfracmech.2015.05.005 ↗
50. Hobbacher AF. Recommendations for fatigue design of welded joints and components. 2nd ed. IIW Collection, IIW-2259-15 (2013).
51. Wang Q, Liu X, Dong Z, Xiong X, Fang H. Influence of stress ratio, microstructure and residual stresses on fatigue crack growth rate of Ni-Cr-Mo-V high strength steel welded joint. In: Proceedings of the 70th IIW international conference, 2017, Shanghai, China; 2017.10.1016/j.ijfatigue.2017.05.001 ↗
52. Fatigue crack propagation behaviour of steels with different microstructures10.1016/j.msea.2012.04.103 ↗
53. The contribution of intragranular acicular ferrite microstructural constituent on impact toughness and impeding crack initiation and propagation in the heat-affected zone (HAZ) of low-carbon steels10.1016/j.msea.2015.03.090 ↗
54. Bhadeshia · 2006
55. A crack opening stress equation for fatigue crack growth10.1007/BF00020751 ↗
56. A crack closure model of fatigue crack growth in plates of finite thickness under small-scale yielding conditions10.1016/j.mechmat.2008.10.002 ↗