Development of a Novel Beam-Based Finite-Element Approach for the Computationally Efficient Prediction of Residual Stresses and Displacements in Large 3D-Printed Polymer Parts

Recently, 3D printing of large, structural polymer parts has received increasing interest, especially for the creation of recyclable structural parts and tooling. However, the complexity of large-scale 3D polymeric printing often dictates resource-intensive trial and error processes to achieve acceptable parts. Existing computational models used to assess the impact of fabrication conditions typically treat the 3D-printed part as a continuum, incorporate oversimplified boundary conditions and take hours to days to run, making design space exploration infeasible. The purpose of this study is to create a structural model that is computationally efficient compared with traditional continuum models yet retains sufficient accuracy to enable exploration of the design space and prediction of part residual stresses and deformations. To this end, a beam-based finite element methodology was created where beads are represented as beams, vertical springs represent inter-bead transverse force transfer and multi-point, linear constraints enforce strain compatibility between adjacent beads. To test this framework, the fabrication of a large Polyethylene terephthalate glycol (PETG) wall was simulated. The PETG was modeled as linearly elastic with an experimentally derived temperature-dependent coefficient of thermal expansion and elastic modulus using temperature history imported from an ABAQUS thermal model. The results of the simulation were compared to those from a continuum model with an identical material definition, showing reasonable agreement of stresses and displacements. Further, the beam-based model required an order of magnitude less run time. Subsequently, the beam-based model was extended to allow separation of the part from the printing bed and the inclusion of part self-weight during fabrication to assess the significance of these effects that pose challenges for existing continuum models.