Study on L-Bending Springback of 45 Steel Leather Cutting Tool Coupled with Local Induction Heating

Springback error is a major obstacle in L-bending sheets via cold working. Although thermal processing can effectively reduce the springback phenomenon, it is challenging to heat the sheet globally due to the influence of working conditions. Therefore, this study applied local induction heating to reduce the springback of 45 steel sheets and investigated the effects of bending parameters on springback behavior. Initially, a thermodynamic coupling model and a static model were created utilizing the VOCE hardening model and the von Mises yield criterion in the ANSYS workbench 2022 R2 software. The springback behavior and stress distribution of the sheets were then investigated under different temperatures (room temperature and 800 °C) and bending angles (15°, 30°, 45°, 60°, 75°, and 90°). Simultaneously, the experiments were performed to investigate springback behavior and guarantee the accuracy of the model. The results indicate that the springback reached a minimum value at the 45° bending angle at room temperature while increasing with the increasing bending angle under 800 °C local heating. The springback under local heating can be decreased by 75.2% and the error of the bending angle can improve by 2–7° compared with samples processed in room temperature.