Experimental Investigation on Structural Performance Enhancement of Brick Masonry Member by Internal Reinforcement

This study focused on perforated bricks, and the structural performance enhancement of brick members by internal reinforcement was experimentally investigated. As a new reinforcing material, screw iron (SI) rods were selected for the internal reinforcement, and they were inserted into the perforated brick. To investigate the most-effective reinforcing method as well as to understand the fundamental structural behaviors, four specimens with different variables were fabricated, and three-point bending tests were carried out. From the experiments, it was found that the maximum strength of the specimen increased by more than two times with internal reinforcement. The internal reinforcement, fixed by nuts at both ends of the specimen to enhance integrity, increased the maximum strength by nine times. Moreover, the deformation capacities of the specimens were also greatly enhanced. The case where the internal SI rods were fixed by nuts without mortar also showed a similar structural performance to the case with mortar. The estimation methods of the maximum strength of the specimens were also discussed, and they showed reasonable agreement with the test results. It was proved that the proposed material and methods enabled effective utilization of the internal reinforcement, and they could contribute to the improvement of structural performances in masonry construction.