Intelligent Alignment Monitoring Method for Tortilla Processing Based on Machine Vision
Source abstract
Abstract
As people pay more and more attention to a healthy diet, it has become a consensus to eat more coarse grains. The development of its edible value is of great significance for a healthy human diet and has attracted the attention of many scholars and food processing companies. However, due to the differences in protein composition and structure between corn flour and wheat protein, it is difficult to form a network structure during processing, and the viscoelasticity and flexibility are poor. Based on this, this paper proposes a machine vision-based noodle positioning monitoring method to achieve noodle alignment monitoring in the noodle processing process. First, the images are captured by binocular cameras and preprocessed. Further, feature detection and matching algorithms are used to recover the pose information between binocular cameras, and then the recognition targets are matched. Finally, noodle alignment monitoring during noodle processing is achieved. Experiments show that the detection accuracy of the method proposed in this paper is much higher than the traditional manual detection, which can improve the noodle quality and reduce labor costs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Spectroscopy and Chemometric Analyses · Smart Agriculture and AI
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Anhui Science and Technology University, 9 Donghua East Road, Fengyang 233100, China
Funding
Key Project of the Anhui Provincial Department of Education, China
References (27)
Show source-provided references
1. Xiang, R., Hong, T., and Zhou, M. (2014, January 10–12). Analysis of depth measurement errors of tomatoes using binocular stereo vision based on single factor experiments. Proceedings of the 2014 13th International Conference on Control Automation Robotics & Vision (ICARCV), Singapore.10.1109/ICARCV.2014.7064285 ↗
2. Ranft, B., and Strauß, T. (2014, January 8–11). Modeling arbitrarily oriented slanted planes for efficient stereo vision based on block matching. Proceedings of the 17th International IEEE Conference on Intelligent Transportation Systems (ITSC), Qingdao, China.10.1109/ITSC.2014.6957990 ↗
3. Lee, C.H., and Kim, D. (2014, January 24–26). Stereo vision-based pedestrian detection using dense disparity map-based detection and segmentation. Proceedings of the 6th International Conference on Graphic and Image Processing (ICGIP 2014), Beijing, China.10.1117/12.2178695 ↗
4. Representation and recognition of the spatial organization of three-dimensional shapes10.1098/rspb.1978.0020 ↗
5. A review of the positioning methods of Spirit and Opportunity rovers
6. Schmid, K., Tomic, T., Ruess, F., Hirschmüller, H., and Suppa, M. (2013, January 3–7). Stereo vision based indoor/outdoor navigation for flying robots. Proceedings of the 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems, Tokyo, Japan.10.1109/IROS.2013.6696922 ↗
7. Okada, K., Inaba, M., and Inoue, H. (2003, January 1). Integration of real-time binocular stereo vision and whole body information for dynamic walking navigation of humanoid robot. Proceedings of the IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, MFI2003, Tokyo, Japan.
8. Research on camera external parameter calibration of binocular vision measurement system
9. A Study of 3d Coordinate Measuring Based on Binocular Stereo Vision10.4028/www.scientific.net/AMM.740.531 ↗
10. Wang, G. (2014). Research on 3D Face Model Reconstruction Based on Binocular Stereo Vision, Jilin University.
11. Stereo Camera Calibration Using Particle Swarm Optimization10.1080/08839514.2013.813191 ↗
12. Grossmann, E., Woodfill, J.I., and Gordon, G.G. (2014). Camera Calibration Using an Easily Produced 3D Calibration Pattern. (8,872,897), U.S. Patent.
13. Tool wear monitoring of micro-milling operations10.1016/j.jmatprotec.2009.01.013 ↗
14. On-line tool wear measurement for ball-end milling cutter based on machine vision10.1016/j.compind.2013.03.010 ↗
15. Research on monitoring of wear condition of milling tool with variable parameters
16. Prediction of cutting tool wear, surface roughness and vibration of work piece in boring of AISI 316 steel with artificial neural network10.1016/j.measurement.2014.01.024 ↗
17. Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling10.1016/j.ins.2013.06.010 ↗
18. A computer vision approach to analyze and classify tool wear level in milling processes using shape descriptors and machine learning techniques10.1007/s00170-016-9541-0 ↗
19. An automated flank wear measurement of microdrills using machine vision10.1016/j.jmatprotec.2006.07.001 ↗
20. Automatic detection and detection system of tool wear10.3788/OPE.20142212.3332 ↗
21. New approach in tool wear measuring technique using CCD vision system10.1016/j.ijmachtools.2004.11.030 ↗
22. Tool wear measuring technique on the machine using CCD and exclusive jig10.1016/S0924-0136(02)00733-1 ↗
23. Effect of the gray cast iron microstructure on milling tool life and cutting force10.1007/s40430-013-0004-3 ↗
24. Kinetic measuring method of rice growth in tillering stage using automatic digitalimaging system10.2525/ecb.43.83 ↗
25. Automatic non-destructive monitoring technology of chrysanthemum growth based on machine vision
26. Measurement of maize plant shape at seedling stage based on binocular stereo vision
27. Measurement of maize seedling morphological traits based on binocular stereo vision