Wheat–Oat Bread Enriched with Beetroot-Based Additives: Technological and Quality Aspects

Beetroot-based additives are interesting for enriching bread in terms of bioactive compounds. The objective of this study was to determine the effect of the following beetroot-based additives: a beetroot lyophilizate powder (wheat–oat baking mix flour was replaced in proportions of 2.5, 5.0, 7.5, 10%), a beetroot juice (water was replaced with juice in proportions of 25, 50, 75, 100%) and a by-product of beetroot juice production, i.e., pomace (wheat–oat baking mix flour was replaced in proportions of 2.5, 5.0, 7.5, 10%) on the quality of wheat–oat bread and the content of bioactive components in this type of bread. The properties of the dough were also assessed. The type and percentage level of partially replacing wheat–oat baking mix flour or water with beetroot-based additives had a significant impact on water absorption, dough development, and stability time of the tested dough. The beetroot juice (BJ) and powder (BLP) had the most significant impact on the rheological properties of the dough, whereas the pomace (BP) had the smallest effect. Beetroot-based additives, especially powder and juice, reduced the volume of bread (from 199 to 148 cm3/100 g of bread) but did not change oven loss [%] and bread crumb porosity index. Breads with these additives showed higher increased values for dough yield [%] and bread yield [%] (for beetroot powder—by 10% compared to the control sample (133.37% and 113.83%)). Tested additives had an impact on the crust and crumb color of the tested wheat–oat breads. The proposed additives significantly increased the antioxidant activity, total phenolic content, and betalain content in the bread samples. The above results showed that, from a technological point of view, replacing water or flour in the wheat–oat bread recipe with beetroot-based additives with a maximum concentration of 5% for BP or BLP and 50% for BJ allows for obtaining a product of good quality.