Critical Low Earth Orbit Scenarios for Windows of Space Stations Made of Acrylic Glass
Source abstract
Abstract
Thermal analyses of space station windows in Low Earth Orbit (LEO) are usually focused on a specific orbiting scenario, namely the one with the longest eclipse duration and the greatest temporal fluctuation in solar radiation, that is typically considered the most critical for satellites. However, for windows made of materials such as acrylic glass, whose mechanical properties are sensitive to temperature, alternative orbital configurations can lead to significantly higher heating than previously estimated. In particular, this study identifies a critical condition, occurring when the orbit plane is highly inclined with respect to the Sun rays, so that one surface is exposed to prolonged and intense radiation. Here, it is demonstrated that, under this scenario, the Sun-facing surface may reach temperatures above the glass transition point, risking material degradation and structural failure, while the opposite surface experiences low temperatures, potentially leading to embrittlement. These findings emphasize the need to evaluate transient thermal behavior under diverse orbital geometries when designing large windows for future space stations. The results highlight key trade-offs between material properties, glazing dimensions, and orbital parameters to ensure safety and performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Spacecraft Design and Technology · Planetary Science and Exploration · Space Satellite Systems and Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering for Industrial Systems and Technologies, University of Parma, Parco Area delle Scienze 181/A, I-43124 Parma, Italy
Construction Technologies Institute—Italian National Research Council (ITC-CNR), Via Lombardia 49, I-20098 San Giuliano Milanese, Italy
References (30)
Show source-provided references
1. Visual experiences of the astronauts and cosmonauts10.1177/001872086300500303 ↗
2. Haines, R.F. (1987). NASA Technical Memorandum 88233—Space Station Proximity Operations Windows: Human Factors Design Guidelines, NASA.
3. Bonner, G.P., Heidt, M.F., Kotila, C.L., Lintott, J.A., and Novotny, J.E. (1968). NASA Technical Note D-5471—Postflight Optical Evaluation of the Right-Hand and Left-Hand Windows of Gemini Missions 4, 5, 6, and 7, NASA. Technical Report.
4. Leger, L.J., and Bricker, R.W. (1972). NASA Technical Note D-6721—Apollo Experience Reports: Window Contamination, NASA. Technical Report.
5. Pigg, O.E., and Weiss, S.P. (1973). NASA Technical Note D-7439—Apollo Experience Report: Spacecraft Structural Windows, NASA. Technical Report.
6. Worn, C.L., Taylor, S., and Zinecker, A. (2024, January 26–30). Spacecraft Window Design From A Thermal Perspective. Proceedings of the Thermal and Fluids Analysis Workshop (TFAWS 2024), Cleveland, OH, USA.
7. Materials used in space shuttle: Evolution, challenges, and future prospects—An overview10.1016/j.compositesb.2025.112540 ↗
8. NASA (2025, August 26). ISS Daily Summary Report—4/03/2024, Available online: https://blogs.nasa.gov/stationreport/2024/04/03/.
9. NASA (2025, August 26). ISS Daily Summary Report—8/24/2021, Available online: https://blogs.nasa.gov/stationreport/2021/08/24/.
10. Experimental investigation and modeling of the mechanical properties of construction PMMA at different temperatures10.1016/j.istruc.2023.105091 ↗
11. Effects of strain rate and temperature on the mechanical behavior of polymethyl methacrylate (PMMA)10.1007/s00289-022-04472-z ↗
12. Investigation by molecular dynamics simulation of the glass transition temperature and elastic properties of amorphous polymers PMMA, PMAAM and PMMA co PMAAM copolymers10.1007/s00289-016-1637-z ↗
13. A unified model for stiffness modulus of amorphous polymers across transition temperatures and strain rates10.1016/j.polymer.2005.06.103 ↗
14. NASA (2025, June 26). Space Station Visiting Vehicles, Available online: https://www.nasa.gov/international-space-station/space-station-visiting-vehicles/.
15. Energy absorption through radiation in transparent plates for spacecraft windows10.1007/s42496-024-00233-5 ↗
16. Galuppi, L., and Royer-Carfagni, G. (2025). Thermal analysis of space station windows in low Earth orbit. Intermaterial comparison of fused silica and acrylic glass. Aerotec. Missili Spaz.10.1007/s42496-025-00250-y ↗
17. Rickman, S.L. (2014;, January 4–8). Introduction to on-orbit thermal environments. Proceedings of the Thermal and Fluids Analysis Workshop (TFAWS), Cleveland, OH, USA.
18. Modest, M.F. (2013). Radiative Heat Transfer, Academic Press.10.1016/B978-0-12-386944-9.50023-6 ↗
19. Bhatt, S., Svecz, A., Alaniz, A., Jang, J.-W., Nguyen, L., and Spanos, P. (February, January 31). Thermally constrained fuel-optimal ISS maneuvers. Proceedings of the AAS Guidance and Control Conference, Breckenridge, CO, USA. number JSC-CN-32749.
20. Versteeg, C., and Cotten, D.L. (2018). Preliminary Thermal Analysis of Small Satellites, Small Satellite Research Laboratory, The University of Georgia.
21. Advanced Passive Thermal Control Materials and Devices for Spacecraft: A Review10.1007/s10765-022-03010-3 ↗
22. (MATLAB, 2023). MATLAB, Version R2023b—Academic Use.
23. Evaluation of environmental effects on mechanical properties and characterization of creep behavior of PMMA10.1080/02533839.2007.9671253 ↗
24. Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling10.1016/j.polymertesting.2016.12.016 ↗
25. Investigation of Thermo-mechanical Properties of PMMA10.1063/1.3466571 ↗
26. Influence of strain rate, temperature and adiabatic heating on the mechanical behaviour of poly methyl-methacrylate: Experimental and modelling analyses10.1016/j.matdes.2011.11.032 ↗
27. Timoshenko, S.P., and Woinowsky-Krieger, S. (1959). Theory of Plates and Shells, McGraw-Hill.
28. Reddy, J.N. (1999). Theory and Analysis of Elastic Plates, Taylor and Francis.
29. Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates10.1016/j.ijsolstr.2007.05.018 ↗
30. Estes, L.R. (2002, January 10–19). The ISS eye on the universe: The verification of ISS Cupola window glass. Proceedings of the IAF Abstracts, 34th COSPAR Scientific Assembly, Houston, TX, USA.