Analysis of Surface Roughness of Diamond-Burnished Surfaces Using Kraljic Matrices and Experimental Design
Source abstract
Abstract
This study analyzed the surface layer condition of X5CRNI18-10 stainless austenitic chromium–nickel steel test pieces after burnishing. Among the finishing operations, burnishing is an economical and low-environmental-impact process. In special cases, grinding can be replaced by burnishing, so the same roughness can be achieved with much lower environmental impact. The aim of this study is to analyze the roughness of a surface machined by diamond burnishing using Kraljic matrices. The technological parameters used during the burnishing tests were burnishing speed, feed rate, and burnishing force. The full factorial experimental design method was used to carry out the experiments. Using Kraljic matrices, the optimum burnishing force was determined to select the best value of the surface roughness, and the change in surface roughness was investigated using full factorial experimental design for different technological parameter combinations. A special improvement ratio formula was developed to evaluate the effectiveness of the burnishing process with respect to 2D and 3D roughness parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Laser Material Processing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering and Informatics, University of Miskolc, H-3515 Miskolc, Hungary
References (77)
Show source-provided references
1. Combination of Lean value-oriented conception and facility layout design for even more significant efficiency improvement and cost reduction10.1080/00207543.2020.1712490 ↗
2. Preliminary Study on the Function-Defining 3D Surface Roughness Parameters in Tangential Turning10.30880/ijie.2023.15.07.007 ↗
3. Analysis and Prediction of Roughness of Face Milled Surfaces using CAD Model
4. Analytical analysis of the theoretical surface roughness in the case of burnishing of cylindrical workpiece
5. Examining the impact of slide burnishing parameters on the 3D surface features of medium carbon steel10.24867/JPE-2024-01-030 ↗
6. Force-controlled burnishing process for high surface integrity on additive manufactured parts10.1016/j.procir.2022.03.101 ↗
7. Optimization of Roller Burnishing Process Parameters on Surface Roughness Using Response Surface Methodology10.1016/j.matpr.2019.07.295 ↗
8. Güneş, G.M., and Durakbasa, N.M. (2023). Energy Efficiency Analysis When Grinding and Diamond Burnishing of Components. Towards Industry 5.0: Selected Papers from ISPR2022, Springer International Publishing.
9. Multi-roller taper burnishing of internal chamfers and its enhancement mechanism on 7050 aluminum alloy10.1016/j.ijfatigue.2024.108571 ↗
10. Research on fabricating gradient nanostructure and enhancing wear resistance in aluminum alloy via two-dimensional ultrasonic surface burnishing10.1016/j.surfcoat.2024.131302 ↗
11. Evaluation of Surface Roughness of Aluminum Alloy in Burnishing Process Based on Chaos Theory10.1186/s10033-022-00828-8 ↗
12. Influence of the process parameters on the surface roughness, micro-hardness, and residual stresses in slide burnishing of high-strength aluminum alloys10.1007/s40430-016-0647-y ↗
13. Fatigue performance of Ti6Al4V alloy treated with laser-assisted burnishing10.1016/j.ijfatigue.2024.108788 ↗
14. Surface changes and fretting fatigue evaluation of Ti6Al4V burnished hip necks10.1016/j.procir.2024.05.062 ↗
15. Multiscale mechanical performance evaluation of L-DED Ti6Al4V by novel ultrasonic burnishing (UB)10.1016/j.jmapro.2024.06.023 ↗
16. Biodegradation performance of ball burnished magnesium alloy in stimulated body fluids for bioresorbable implant applications10.1016/j.mtcomm.2024.108525 ↗
17. Study of Ball Burnishing Process on the Surface Roughness and Microhardness of AZ91D Alloy10.1007/s40799-017-0228-8 ↗
18. A framework toward fatigue life modeling of machining process verified in burnishing10.1016/j.ymssp.2024.111923 ↗
19. Interaction of electric current with burnishing parameters in surface integrity assessment of additively manufactured Inconel 71810.1016/j.measurement.2024.114474 ↗
20. Surface integrity improvement of the ground surface of Inconel 718 fabricated by forging and additive manufacturing using a robotic rotational burnishing method10.1016/j.jmapro.2024.07.083 ↗
21. Finite element analysis of the surface finishing of additively manufactured 316L stainless steel by ball burnishing10.1016/j.procir.2023.03.049 ↗
22. Simulation of surface roughness evolution of additively manufactured material fabricated by laser powder bed fusion and post-processed by burnishing10.1016/j.jmapro.2022.09.045 ↗
23. Attabi, S., Himour, A., Laouar, L., and Motallebzadeh, A. (2021). Effect of Ball Burnishing on Surface Roughness and Wear of AISI 316L SS. J. Bio-Tribo-Corros., 7.10.1007/s40735-020-00437-9 ↗
24. Argirov, Y., Maximov, J., Duncheva, G., Anchev, A., Dunchev, V., and Mechkarova, T. (2025). Evolution of Surface Integrity Characteristics and Mechanical Behavior of Diamond Burnished and Turned AISI 304 Steel Specimens After Prolonged Exposure to Natural Seawater. Coatings, 15.10.3390/coatings15010031 ↗
25. Maximov, J., Duncheva, G., Anchev, A., Dunchev, V., and Argirov, Y. (2024). Improvement in Fatigue Strength of Chromium–Nickel Austenitic Stainless Steels via Diamond Burnishing and Subsequent Low-Temperature Gas Nitriding. Appl. Sci., 14.10.3390/app14031020 ↗
26. Influence of low plasticity burnishing on the formation of strain induced martensite in the surface layer10.1016/j.jmrt.2023.10.133 ↗
27. Kluz, R., Antosz, K., Trzepiecinski, T., and Bucior, M. (2021). Modelling the Influence of Slide Burnishing Parameters on the Surface Roughness of Shafts Made of 42CrMo4 Heat-Treatable Steel. Materials, 14.10.3390/ma14051175 ↗
28. Surface characteristics and corrosion behavior of TC11 titanium alloy strengthened by ultrasonic roller burnishing at room and medium temperature10.1016/j.jmrt.2020.05.059 ↗
29. Maximov, J., Duncheva, G., Ichkova, M., and Anastasov, K. (2025). Optimal Diamond Burnishing of Chromium–Nickel Austenitic Stainless Steels Based on the Finishing Process–Surface Integrity–Operating Behavior Correlations. Metals, 15.10.3390/met15060574 ↗
30. Maximov, J., Duncheva, G., Anchev, A., Dunchev, V., Anastasov, K., and Argirov, Y. (2024). Sustainable Diamond Burnishing of Chromium–Nickel Austenitic Stainless Steels: Effects on Surface Integrity and Fatigue Limit. Appl. Sci., 14.10.3390/app14199031 ↗
31. Explicit correlation between surface integrity and fatigue limit of surface cold worked chromium nickel austenitic stainless steels10.1007/s00170-024-14113-6 ↗
32. Maximov, J., Duncheva, G., Anchev, A., Dunchev, V., Argirov, Y., and Nikolova, M. (2023). Effects of Heat Treatment and Diamond Burnishing on Fatigue Behaviour and Corrosion Resistance of AISI 304 Austenitic Stainless Steel. Appl. Sci., 13.10.3390/app13042570 ↗
33. Maximov, J., Duncheva, G., Anchev, A., Dunchev, V., and Argirov, Y. (2022). Effect of Diamond Burnishing on Fatigue Behaviour of AISI 304 Chromium-Nickel Austenitic Stainless Steel. Materials, 15.10.3390/ma15144768 ↗
34. Maximov, J., Duncheva, G., Anchev, A., Dunchev, V., Argirov, Y., Todorov, V., and Mechkarova, T. (2022). Effects of Heat Treatment and Severe Surface Plastic Deformation on Mechanical Characteristics, Fatigue, and Wear of Cu-10Al-5Fe Bronze. Materials, 15.10.3390/ma15248905 ↗
35. Varga, G., Dezső, G., and Szigeti, F. (2022). Surface Roughness Improvement by Sliding Friction Burnishing of Parts Produced by Selective Laser Melting of Ti6Al4V Titanium Alloy. Machines, 10.10.3390/machines10050400 ↗
36. Ferencsik, V., and Varga, G. (2022). The Influence of Diamond Burnishing Process Parameters on Surface Roughness of Low-Alloyed Aluminium Workpieces. Machines, 10.10.3390/machines10070564 ↗
37. Duncheva, G., Maximov, J., Anchev, A., Dunchev, V., Argirov, Y., and Velkov, S. (2023). Modelling and Optimization of Surface Integrity and Sliding Wear Resistance of Diamond-Burnished Holes in Austenitic Stainless Steel Cylinder Lines. Machines, 11.10.3390/machines11090872 ↗
38. Enhancement of the wear resistance of CuAl9Fe4 sliding bearing bushings via diamond burnishing10.1016/j.wear.2022.204491 ↗
39. Improvement in surface integrity of CuAl8Fe3 bronze via diamond burnishing10.1007/s00170-022-08664-9 ↗
40. A comparative study of the RSM and ANN models for predicting surface roughness in roller burnishing10.1016/j.protcy.2016.03.042 ↗
41. Kanovic, Z., Vukelic, D., Simunovic, K., Prica, M., Saric, T., Tadic, B., and Simunovic, G. (2022). The Modelling of Surface Roughness after the Ball Burnishing Process with a High-Stiffness Tool by Using Regression Analysis, Artificial Neural Networks, and Support Vector Regression. Metals, 12.10.3390/met12020320 ↗
42. Influence of ball-burnishing on roughness, hardness and corrosion resistance of AISI 1045 steel
43. Burnishing of aerospace alloy: A theoretical–experimental approach10.1016/j.jmsy.2014.11.004 ↗
44. Optimization of Burnishing Parameters by DOE and Surface Roughness, Microstructure and Micro Hardness Characteristics of AA6061 Aluminium Alloy in T6 Condition
45. Analysis of surface roughness and wear resistance in low plasticity burnishing process using multi-objective optimization technique10.1016/j.matpr.2020.07.543 ↗
46. Surface flatness and roughness evolution after magnetic assisted ball burnishing of magnetizable and non-magnetizable materials10.1016/j.measurement.2020.107750 ↗
47. Determining the effect of ball burnishing parameters on surface roughness using the Taguchi method10.1016/j.promfg.2019.06.152 ↗
48. Analysis of surface hardness and surface roughness in diamond burnishing of 17-4 PH stainless steel10.1088/1757-899X/577/1/012075 ↗
49. Effect of Burnishing Parameters on Surface Finish10.1007/s40032-016-0320-3 ↗
50. Simulation of the burnishing process on real surface structures10.1016/j.precisioneng.2020.12.004 ↗
51. FEM Investigation of the Roughness and Residual Stress of Diamond Burnished Surface10.3390/jeta2040007 ↗
52. Finite element and experimental study of the residual stresses in 2024-T3 Al alloy treated via single toroidal roller burnishing10.1007/s40430-020-02775-8 ↗
53. Different strategies for finite element simulations of static mechanical surface treatment processes—A comparative analysis10.1007/s40430-021-03085-3 ↗
54. Enhancing Surface Integrity of Additively Manufactured Inconel 718 by Roller Burnishing Process10.1016/j.procir.2022.03.106 ↗
55. Improvement in Fatigue Performance of 2024-T3 Al Alloy Via Single Toroidal Roller Burnishing10.1007/s11665-021-05535-4 ↗
56. Surface integrity and high-cycle fatigue life of direct laser metal deposited AISI 431 alloys modified by plasticity ball burnishing10.1016/j.ijfatigue.2024.108614 ↗
57. Effect of ball burnishing on surface roughness, wettability, mechanical integrity and antifouling resistance of UHMWPE10.1016/j.surfcoat.2023.130237 ↗
58. Evolution and anti-fatigue mechanism of surface characteristics of Ti60 alloy induced by ball burnishing and shot peening during tensile-compression fatigue10.1016/j.engfailanal.2024.108136 ↗
59. A numerical investigation into the influence of the slide burnishing process on the real surface roughness and residual stress profiles of AHSS10.1016/j.jmrt.2024.09.151 ↗
60. Combining turning with slide burnishing to improve surface integrity and stress corrosion resistance10.1016/j.jmapro.2023.10.041 ↗
61. Maximov, J., and Duncheva, G. (2024). Effects of Cryogenic- and Cool-Assisted Burnishing on the Surface Integrity and Operating Behavior of Metal Components: A Review and Perspectives. Machines, 12.10.3390/machines12050312 ↗
62. Maximov, J., and Duncheva, G. (2023). The Correlation between Surface Integrity and Operating Behaviour of Slide Burnished Components—A Review and Prospects. Appl. Sci., 13.10.3390/app13053313 ↗
63. A cost effective optimization approach for improving the fatigue strength of diamond burnished steel components10.1007/s40430-020-02723-6 ↗
64. Purchasing Must Become Supply Management
65. A comprehensive framework and literature review of supplier selection under different purchasing strategies10.1016/j.cie.2022.108010 ↗
66. A comprehensive multi-stage decision-making model for supplier selection and order allocation approach in the digital economy10.1016/j.aei.2024.102961 ↗
67. Introducing the circular assessment of suppliers (CAoS) tool: A Kraljic matrix-based tool to facilitate circular procurement in private organizations10.1016/j.jclepro.2024.142085 ↗
68. Degradation of chlortetracycline in wastewater sludge by ultrasonication, Fenton oxidation, and ferro-sonication10.1016/j.ultsonch.2016.05.042 ↗
69. Overlooked effects of chlorides and bicarbonates on the intensity of peroxydisulfate activation in Fe(II)/citric acid-S2O82− process10.1016/j.eti.2024.103687 ↗
70. Towards sustainable and nutritional-based plant protein sources: A review on the role of rapeseed10.1016/j.foodres.2024.115553 ↗
71. Felhő, C., Tesfom, F., and Varga, G. (2023). ANOVA Analysis and L9 Taguchi Design for Examination of Flat Slide Burnishing of Unalloyed Structural Carbon Steel. J. Manuf. Mater. Process., 7.10.3390/jmmp7040136 ↗
72. Effect of burnishing technological parameters on the surface roughness and hardness of stainless steel test pieces (A vasalástechnológiai paraméterek hatása a rozsdamentes acél próbadarabok felületi érdességére és keménységére)10.35925/j.multi.2022.5.14 ↗
73. Modeling of the friction in the tool-workpiece system in diamond burnishing process10.12989/csm.2015.4.4.279 ↗
74. (2025, July 13). Available online: https://www.imeco-th.cz/files/tinymce/AltiSurf%E2%84%A2%20520.pdf.
75. (2021). Geometrical Product Specifications (GPS)—Surface Texture: Profile Part 2: Terms, Definitions and Surface Texture Parameters (Standard No. ISO 21920-2:2021).
76. (2021). Geometrical Product Specifications (GPS)—Surface Texture: Areal. Part 2: Terms, Definitions and Surface Texture Parameters (Standard No. ISO 25178-2:2021).
77. Fridrik, L. (1993). Selected Chapters on the Topic of Designing Engineering Technology Experiments, Tankönyvkiadó. (In Hungarian).