Heat Transfer Intensification in a Heat Exchanger Tube with Continuous V-Rib Twisted Tapes Installed
Source abstract
Abstract
This article reports the effect of twisted tapes with continuous V-ribs on the thermal performance index characteristics of a heat exchanger tube. Numerical and experimental studies were conducted to investigate the influence of V-rib attack angles (β = 15°, 30°, and 45°) in forward and backward arrangements. This investigation employed 0.9 mm thick, continuous V-rib twisted tapes (CVRTs) made from aluminum sheets formed with a twist ratio of y/w = 4.0. The experimental results indicated that a continuous V-rib twisted tape (CVRT) was more effective in heat transfer improvement than a typical twisted tape (TT). This was due to swirl and longitudinal vortex flows that helped increase flow mixing and reduce boundary layer thickness. Decreased V-rib attack angles (β) led to greater heat transfer enhancement, pressure drop, and thermal performance index values due to the greater turbulent mixing of fluid. The numerical result revealed that a continuous V-rib twisted tape created strong longitudinal vortex flow, especially with higher attack angles. The Turbulent Kinetic Energy (TKE) and core fluid temperature increased with the insertion of CVRTs. Local Nusselt numbers also remained relatively high for heat exchanger tubes with CVRTs. The experimental study illustrated that a tube with a CVRT installed augmented heat transfer. In the experimentally studied cases, a backward arrangement had more heat transfer, a greater friction factor, and a better thermal performance index. Compared to a plain tube, a tube with CVRT installed, having β = 15°, 30°, and 45°, showed 76.8, 71.6, and 66.2% improved heat transfer, respectively. CVRTs with these three β-values, respectively, exhibited higher thermal performance than a TT. Among the investigated CVRTs, the backward-arranged tape with β = 15° offered the maximum thermal performance index, 1.13 at Re = 6000. The results are congruent with the simulation outcomes, hence supporting the CFD analysis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Heat Transfer and Optimization · Heat transfer and supercritical fluids · Heat Transfer Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Engineering and Industrial Technology, Mahanakorn University of Technology, Bangkok 10530, Thailand
School of Engineering, King Mongkut’s Institute of Technology, Ladkrabang, Bangkok 10520, Thailand
Department of Mechanical Engineering, Faculty of Engineering, Srinakharinwirot University, Bangkok 10110, Thailand
Engineering Innovation Unit, Graduate School of Regional Innovation Studies, Mie University, Tsu 514-8507, Mie, Japan
Department of Mechanical Engineering, Faculty of Engineering, Mie University, Tsu 514-8507, Mie, Japan
Department of Mechanical Engineering, Faculty of Engineering, Aichi Institute of Technology, Toyota 470-0392, Aichi, Japan
Funding
King Mongkut’s Institute of Technology, Ladkrabang · NSRF
References (34)
Show source-provided references
1. Heat Transfer Enhancement—The Encouragement and Accommodation of High Heat Fluxes
2. Chammam, W., Farooq, U., Sediqmal, M., Waqas, H., Yasmin, S., Zulfqar, F., Liu, D., and Khan, S.A. (2023). Estimation of heat transfer coefficient and friction factor with showering of aluminum nitride and alumina water based hybrid nanofluid in a tube with twisted tape insert. Sci. Rep., 13.10.1038/s41598-023-49142-w ↗
3. International Energy Agency (IEA) (2021). World Energy Outlook 2021, OECD Publishing.
4. Review of insertion scenarios in enhancement performance of double-pipe heat exchanger: Case of cut twist tape10.1016/j.cep.2025.110308 ↗
5. Marzouk, S.A., Almehmadi, F.A., Aljabr, A., and Sharaf, M.A. (2024). Numerical and experimental investigation of heat transfer enhancement in double tube heat exchanger using nail rod inserts. Sci. Rep., 14.10.1038/s41598-024-59085-5 ↗
6. Enhancing heat transfer for laminar flow in heat pipes using perforated and jagged-edged twisted tapes: An experimental study10.1016/j.energy.2025.136141 ↗
7. Heat and fluid flow behaviors in a laminar tube flow with circular protruded twisted tape inserts10.1016/j.csite.2022.101880 ↗
8. W-cut twisted tape’s effect on the thermal performance of a double pipe heat exchanger: A numerical study10.1016/j.csite.2022.102031 ↗
9. Effects of trapezoidal and twisted trapezoidal tapes on turbulent heat transfer in tubes10.1016/j.applthermaleng.2022.118386 ↗
10. Numerical investigation on heat transfer performance and flow characteristics in circular tubes with dimpled twisted tapes using Al2O3-water nanofluid10.1016/j.ijheatmasstransfer.2017.04.062 ↗
11. Experimental evaluation and thermal performance analysis of a twisted tape with dimple configuration in a heat exchanger10.1016/j.csite.2023.103003 ↗
12. Numerical thermal augmentation of ternary nanofluid in a tube with stent, torus-ring and surface-grooved twisted tapes under non-uniform wall temperature10.1016/j.csite.2023.103308 ↗
13. Improving the thermal-hydraulic performance of parabolic solar collectors using absorber tubes equipped with perforated twisted tape containing nanofluid
14. Optimization of performance parameters of a double pipe heat exchanger with cut twisted tapes using CFD and RSM10.1016/j.cep.2021.108362 ↗
15. Thermal performances of tubular flows enhanced by ribbed spiky twist tapes with and without edge notches10.1016/j.ijheatmasstransfer.2014.02.049 ↗
16. Aerothermal performance of square duct enhanced by twisted tape with inclined ribs and slots10.1016/j.ijheatmasstransfer.2021.121547 ↗
17. A comprehensive analysis of heat transfer in a heat exchanger with simple and perforated twisted tapes based on numerical simulations10.1016/j.csite.2024.104227 ↗
18. Wang, L., Ni, P., and Xi, G. (2021). The effect of off-center placement of twisted tape on flow and heat transfer characteristics in a circular tube. Sci. Rep., 11.10.1038/s41598-021-86285-0 ↗
19. Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes10.1016/j.expthermflusci.2009.09.002 ↗
20. Flow structure and heat transfer in a square duct fitted with dual/quadruple twisted-tapes: Influence of tape configuration10.1007/s12206-015-0748-z ↗
21. Analyzing entropy and thermal behavior of nanomaterial through solar collector involving new tapes10.1016/j.icheatmasstransfer.2021.105190 ↗
22. Analysis of efficiency and performance evaluation criterion of nanofluid flow within a tube enhanced with perforated triple twisted tape: A two-phase analysis10.1016/j.csite.2023.103151 ↗
23. Numerical study of heat transfer and flow structure over channel surfaces featuring miniature V rib-dimples with various configurations10.1016/j.ijthermalsci.2021.107342 ↗
24. Effects of V-shaped rib arrays on turbulent heat transfer and friction of fully developed flow in a square channel10.1016/0017-9310(91)90140-A ↗
25. Thermohydraulics of turbulent flow through rectangular and square ducts with axial corrugation roughness and twisted-tapes with and without oblique teeth10.1016/j.expthermflusci.2010.01.003 ↗
26. Webb, R.L., and Kim, N.H. (2005). Principles of Enhanced Heat Transfer, Taylor & Francis. [2nd ed.].10.4324/9780203017869 ↗
27. ANSI/ASME (1991). Measurement Uncertainty: Part 1: Instruments and Apparatus: ANSI/ASME PTC 19.1—1985, American Society of Mechanical Engineers.
28. Describing uncertainties in single sample experiments
29. Patankar, S.V. (2018). Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corporation.10.1201/9781482234213 ↗
30. Bergman, T.L., Lavine, A.S., Incropera, F.P., and Dewitt, P.D. (2011). Fundamentals of Heat and Mass Transfer, John Wiley & Sons Inc.. [7th ed.].
31. Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape inserts10.1016/j.ijheatmasstransfer.2009.12.023 ↗
32. Influence of sawtooth twisted tape on thermal enhancement of heat exchanger tube10.1016/j.egyr.2022.11.029 ↗
33. Investigation of effects on turbulent heat transfer of twisted wavy tape elements in the tube10.1016/j.ijthermalsci.2022.108068 ↗
34. Hydrothermal performance analyses of an isothermal tube with punched twisted tape turbulator (PTT)10.1016/j.csite.2024.104308 ↗