CMM Influence Factors and Uncertainty Associated with Length Measurement
Source abstract
Abstract
This paper is concerned with coordinate measuring machine (CMM) uncertainty evaluation, in particular, the uncertainties associated with point clouds and distances derived from the point cloud. The uncertainty evaluation approach is model-based following the principles of the Guide to the Expression of Uncertainty in Measurement and the law of the propagation of uncertainty. The paper considers a range of CMM influence factors and derives an explicit dependence for the point cloud data coordinates on the influence factors, allowing uncertainties associated with the influence factors to be propagated through to point cloud uncertainties. The paper describes the use of Gaussian processes to model kinematic and probing errors using a small number of statistical hyper-parameters. These models permit an explicit statement of the uncertainty associated with point clouds and length measurement, enabling the latter to be compared directly with a statement of the maximum permissible error in length measurement. The uncertainty evaluation methodology is direct in that it requires no optimisation nor Monte Carlo simulations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Measurement and Metrology Techniques · Scientific Measurement and Uncertainty Evaluation · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Physical Laboratory, London TW11 0LW, UK
Funding
European Metrology Programme for Innovation and Research (EMPIR) · the European Unions Horizon 2020 research and innovation programme · the EMPIR Participating States
References (37)
Show source-provided references
1. Hocken, R.J., and Pereira, P.H. (2012). Coordinate Measuring Machines and Systems, CRC Press.
2. BIPM (2019). The International System of Units (SI Brochure (EN)), NIST Special Publication. [9th ed.].
3. (2008). Evaluation of Measurement Data—Guide to the Expression of Uncertainty in Measurement (Standard No. JCGM 100:2008).
4. Sładek, J.A. (2016). Coordinate Metrology—Accuracy of Systems and Measurement, Springer.10.1007/978-3-662-48465-4 ↗
5. Automotive Industry Action Group (2010). Measurement Systems Analysis: Reference Manual, Automotive Industry Action Group. [4th ed.].
6. (1994). Accuracy (Trueness and Precision) of Measurement Methods and Results—Part 1: General Principles and Definitions (Standard No. ISO 5725-1).
7. (2019). Accuracy (Trueness and Precision) of Measurement Methods and Results—Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method (Standard No. ISO 5725-2).
8. Montgomery, D.C. (2013). Design and Analysis of Experiments, John Wiley & Sons. [8th ed.].
9. (2008). Evaluation of Measurement Data —Supplement 1 to the “Guide to the Expression of Uncertainty in Measurement”—Propagation of Distributions Using a Monte Carlo Method (Standard No. JCGM 101:2008).
10. (2011). Evaluation of Measurement Data—Supplement 2 to the “Guide to the Expression of Uncertainty in Measurement”—Extension to any Number of Output Quantities (Standard No. JCGM 102:2011).
11. (2024, December 01). Evaluation of Uncertainty Associated with Coordinate Measurement; EURAMET: Braunschweig, Germany. Available online: https://eucom-empir.eu/.
12. GD&T task specific measurement uncertainty evaluation for manufacturing floor10.1016/j.measen.2021.100141 ↗
13. Pavese, F., Forbes, A.B., Yang, N.F., and Chunovkina, A. (2022). Practical experiment design of task-specific uncertainty evaluation for coordinate metrology. Advanced Mathematical and Computational Tools for Metrology XII, World Scientific.
14. Virtual CMM-based model for uncertainty estimation of coordinate measurements performed in industrial conditions10.1016/j.measurement.2016.12.027 ↗
15. Forbes, A.B., Zhang, N.F., Chunovkina, A., Eichstädt, S., and Pavese, F. (2019). Determination of measurement uncertainty by Monte Carlo simulation. Advanced Mathematical and Computational Tools in Metrology and Testing XI, World Scientific.10.1142/11100 ↗
16. A virtual CMM to estimate uncertainties10.1051/ijmqe/2024016 ↗
17. Phillips, S., Borchardt, B., Sawyer, D., Estler, W., Ward, D., Eberhardt, K., Levenson, M., McClain, M., Melvin, B., and Hopp, T. (1997). The Calculation of CMM measurement uncertainty via The Method of Simulation by Constraints. Proc. ASPE, 443–446.
18. Evaluation of coordinate measurement uncertainty with use of virtual machine model based on Monte Carlo method10.1016/j.measurement.2012.02.020 ↗
19. Ciarlini, P., Cox, M.G., Pavese, F., and Richter, D. (1996). The virtual CMM concept. Advanced Mathematical Tools in Metrology, II, World Scientific.10.1142/3336 ↗
20. Results of the CIRP-EUROMET intercomparison of ball plated-based techniques for determining CMM parametric errors10.1016/S0007-8506(07)60866-X ↗
21. A uniform concept for calibration, acceptance test and periodic inspection of co-ordinate measuring machines using reference objects10.1016/S0007-8506(07)61119-6 ↗
22. Cox, M.G., Forbes, A.B., Harris, P.M., and Peggs, G.N. (1998). Determining CMM behaviour from measurements of standard artefacts. Technical Report CISE 15/98, National Physical Laboratory.
23. Approximate models of CMM behaviour and point cloud uncertainties10.1016/j.measen.2021.100304 ↗
24. Cox, M.G., and Harris, P.M. (2010). SSfM Best Practice Guide No. 6, Uncertainty evaluation. Technical Report MS 6, National Physical Laboratory.
25. Golub, G., and Van Loan, C. (2013). Matrix Computations, Johns Hopkins University Press. [4th ed.].10.56021/9781421407944 ↗
26. Modelling and traceability for computationally-intensive precision engineering and metrology10.1016/j.cirp.2018.05.003 ↗
27. Forbes, A.B. (2022). Sensitivity analysis for Gaussian associated features. Appl. Sci., 12.10.3390/app12062808 ↗
28. (1995). Co-Ordinate Metrology: Performance Assessment of Co-Ordinate Measuring Machines (Standard No. ISO 10360).
29. Determination of uncertainty of coordinate measurements on the basis of the formula for EL, MPE10.1016/j.measurement.2023.113635 ↗
30. Effects of Arbitrary Coefficients of CMM Error Maps on Probe Qualification10.1016/S0007-8506(07)62366-X ↗
31. Cressie, N., and Wikle, C.K. (2011). Statistics for Spatio-Temporal Data, Wiley.
32. Rasmussen, C.E., and Williams, C.K.I. (2006). Gaussian Processes for Machine Learning, MIT Press.10.7551/mitpress/3206.001.0001 ↗
33. A displacement method for machine geometry calibration10.1016/S0007-8506(07)61690-4 ↗
34. Ciarlini, P., Cox, M.G., Monaco, R., and Pavese, F. (1994). Self-calibration with application to CMMs geometry error correction. International Workshop on Advanced Mathematical Tools for Metrology, Turin, World Scientific.10.1142/9789814534383 ↗
35. Self-calibration method and software error correction for three dimensional co-ordinate measuring machines using artefact measurements10.1016/0263-2241(94)90024-8 ↗
36. Bayesian calibration of computer models10.1111/1467-9868.00294 ↗
37. Abrahamsen, P. (1997). A Review of Gaussian Random Fields and Correlation Functions, Norsk Regnesentral/Norwegian Computing Centre.