Hypoplastic Modeling of Soil–Structure Contact Surface Considering Initial Anisotropy and Roughness
Source abstract
Abstract
The development of a constitutive model for soil–structure contact surfaces remains a pivotal area of research within the field of soil–structure interaction. Drawing from the Gudehus–Bauer sand hypoplasticity model, this paper employs a technique that reduces the stress tensor and strain rate tensor components to formulate a hypoplastic model tailored for sand–structure interfaces. To capture the influence of initial anisotropy, a deposition direction peak stress coefficient is incorporated; meanwhile, a friction parameter is introduced to address the surface roughness of the contact. Consequently, a comprehensive hypoplastic constitutive model is developed that takes into account both initial anisotropy and roughness. Comparative analysis with experimental data from soils on contact surfaces with diverse boundary conditions and levels of roughness indicates that the proposed model accurately forecasts shear test outcomes across various contact surfaces. Utilizing the finite element software ABAQUS 2021, an FRIC subroutine was developed, which, through simulating direct shear tests on sand–structure contact surfaces, has proven its efficacy in predicting the shear behavior of these interfaces.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
China Road & Bridge Corporation, Beijing 100011, China
Department of Civil Engineering, University of Science and Technology Beijing, Beijing 100083, China
References (42)
Show source-provided references
1. Finite element analyses of retaining wall behavior10.1061/JSFEAQ.0001713 ↗
2. Prediction of the shaft resistance of nondisplacement piles in sand10.1002/nag.1129 ↗
3. Method of soil-elastoplastic dem parameter calibration based on recurrent neural network10.1016/j.powtec.2023.118222 ↗
4. Simple model for the cyclic behavior of smooth sand-steel interfaces10.1061/(ASCE)GT.1943-5606.0000315 ↗
5. Stutz, H.H. (2016). Hypoplastic Models for Soil-Structure Interfaces—Modelling and Implementation. [Ph.D. Thesis, Kiel University].
6. Three-dimensional elasto-plastic damage model for gravelly soil-structure interface considering the shear coupling effect10.1016/j.compgeo.2020.103868 ↗
7. Peridynamic micro-elastoplastic constitutive model and its application in the failure analysis of rock masses10.1016/j.compgeo.2021.104037 ↗
8. A rate-dependent constitutive equation for soils10.1016/0093-6413(77)90056-8 ↗
9. Bounding surface plasticity. I: Mathematical foundation and hypoplasticity10.1061/(ASCE)0733-9399(1986)112:9(966) ↗
10. An outline of hypoplasticity10.1007/BF00788048 ↗
11. A simple hypoplastic constitutive model for sand10.1002/nag.1610181203 ↗
12. A comprehensive constitutive equation for granular materials10.3208/sandf.36.1 ↗
13. Calibration of a comprehensive hypoplastic model for granular materials10.3208/sandf.36.13 ↗
14. A hypoplastic relation for granular materials with a predefined limit state surface10.1002/(SICI)1099-1484(199607)1:3<251::AID-CFM13>3.0.CO;2-3 ↗
15. A basic hypoplastic constitutive model for sand10.1007/s11440-017-0550-4 ↗
16. A Hypoplastic Constitutive Model for Granular Materials with Particle Breakage10.1061/IJGNAI.GMENG-8134 ↗
17. An extended hypoplastic constitutive model considering particle breakage for granular material10.1016/j.compgeo.2023.105503 ↗
18. Subair, A., and Aljorany, A. (2020, January 5–6). Experimental and Numerical Analysis of Axially Loaded Slender Piles Implementing a Hypoplastic Model. Proceedings of the IOP Conference Series: Materials Science and Engineering, Kerbala, Iraq.10.1088/1757-899X/1067/1/012069 ↗
19. A gradation-dependent hypoplastic model for crushable sands10.1007/s11440-024-02372-2 ↗
20. Tian, H., Zeng, K., Zhang, H., and Lu, S. (2020, January 23–26). Research on Extended Hypoplastic Model and Its Verification for Deposits Soil. Proceedings of the IOP Conference Series: Earth and Environmental Science, Beijing, China.10.1088/1755-1315/570/6/062034 ↗
21. Simhypo-sand: A simple hypoplastic model for granular materials and SPH implementation10.1007/s11440-024-02350-8 ↗
22. Pande, G.N., Pietruszczak, S., and Schweiger, H.F. (2020). Hypoplastic description of the interface behaviour. Numerical Models in Geomechanics, CRC Press.10.1201/9781003078548 ↗
23. Gutjahr, S. (2003). Optimierte Berechnung von Nicht Gestützten Baugrubenwänden in Sand. [Doctor’s Thesis, Universität Dortmund].
24. Schweiger, H.F. (2006). Hypoplastic description of the frictional behaviour of contacts. Numerical Methods in Geotechnical Engineering, Taylor & Francis.
25. Enhancement of a hypoplastic model for granular soil–structure interface behaviour10.1007/s11440-016-0440-1 ↗
26. Hypoplastic interface models for fine—Grained soils10.1002/nag.2561 ↗
27. Jong, Y., Ma, Y., and Liu, Y. (2020, January 14–15). Granular Hypoplastic Interface Model Considering Surface Roughness. Proceedings of the Journal of Physics: Conference Series, Busan, Republic of Korea.
28. Hypoplastic interface model considering plane strain condition and surface roughness10.1155/2021/1473181 ↗
29. Novel approach to apply existing constitutive soil models to the modelling of interfaces10.1002/nag.3344 ↗
30. Mortar contact discretisation methods incorporating interface models based on Hypoplasticity and Sanisand: Application to vibratory pile driving10.1016/j.compgeo.2022.104677 ↗
31. Rational approach to anisotropy of sand10.1002/(SICI)1096-9853(1998110)22:11<921::AID-NAG948>3.0.CO;2-J ↗
32. A hypoplastic model for granular soils incorporating anisotropic critical state theory10.1002/nag.3025 ↗
33. Investigations of shear banding in an anisotropic hypoplastic material10.1016/j.ijsolstr.2004.05.052 ↗
34. On the mechanics and modeling of interfaces between granular soils and structural materials10.1016/j.acme.2018.06.003 ↗
35. Stutz, H.H., and Martinez, A. (2018, January 3). Hypoplastic simulation of axisymmetric interface shear tests in granular media. Proceedings of the China-Europe Conference on Geotechnical Engineering: Volume 1, Vienna, Austria.10.1007/978-3-319-97112-4_16 ↗
36. Numerical testing of the stability criterion for hypoplastic constitutive equations10.1016/0167-6636(90)90006-2 ↗
37. Li, S. (2016). The Macro-Micromechanical Analysis and Numerical Simulation of Shear Anisotropy in the Sand-Structure Contact Zone. [Master’s Thesis, University of Science and Technology Beijing].
38. Behavior of sand particles in sand-steel friction10.3208/sandf1972.28.107 ↗
39. Determination of Parameters of a Hypoplastic Constitutive Model from Properties of Grain Assemblies10.1002/(SICI)1099-1484(199909)4:5<461::AID-CFM71>3.0.CO;2-P ↗
40. Factors Controlling Maximum and Minimum Densities of Sands
41. Unified modeling of soil-structure interface and its test confirmation
42. Extended hyperbolic model for sand-to-concrete interfaces10.1061/(ASCE)1090-0241(2003)129:11(993) ↗