Investigation of Effects of Feed Rate and Cutting-Edge Angle Variation on Surface Roughness in External Cylindrical Turning Process of Ms58 Brass Material
Source abstract
Abstract
The Ms58 brass material was machined dry by the lathe’s external cylindrical surface turning method. Three different feeds (0.155, 0.088, and 0.028 mm/rev), 3 different cutting-edge angles (70°, 80°, and 90°), and three-spindle speeds (480, 630, and 1250 rpm) were used in machining experiments. The depth of the cut value was taken as a 0.5 mm constant. The effects of these different parameters on surface roughness values were investigated. For each surface roughness value measured from parts machined with other parameters, measurements were made five times, the largest and smallest values were discarded, and the average of the remaining 3 values was taken. This rigorous process of data collection ensured the reliability of the results. Graphs were prepared and examined with working parameters and surface roughness values. As a result, it was determined that the surface roughness value decreased with the decrease in feed and the increase in another parameter, the “cutting-edge angle” of the tool. When external cylindrical surface turning was performed with the experimental parameters of 480 rpm, a large cutting-edge angle of 90°, and a depth of cut of 0.5 mm within this study plan, the lowest average surface roughness was obtained as 1.228 µm.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Science · Metal Alloys Wear and Properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Faculty of Engineering, Balıkesir University, Balıkesir 10145, Türkiye
References (21)
Show source-provided references
1. Experimental investigation of the effects of cutting parameters on surface roughness for high speed steel tools
2. The effect of process parameters on surface roughness in CNC turning
3. Determination of cutting parameters to provide optimum surface roughness in machining of AISI 304 steels on CNC lathe
4. Investigation of the machinability of AISI 01 cold work tool steel regarding cutting forces and surface roughness
5. Investigation of surface roughness in dry turning of AISI 1040 steel10.7212/zkufbd.v2i2.65 ↗
6. On the connection between microstructure and surface roughness of brass sheets and their formability10.1007/s00707-015-1416-1 ↗
7. Influence of Tool Coating, Tool Material, and Cutting Speed on the Machinability of Low-Leaded Brass Alloys in Turning10.1080/10426914.2015.1127944 ↗
8. Effect of cutting parameters on surface roughness and tool wear in the milling process of AISI D2 cold work tool steel with different hardness
9. Investigation of the effects of cutting parameters on vibration, sound intensity, and surface roughness in the machining of GGG50 material on a lathe
10. Investigating Optimum Parameters Required for Drilling Brass using Response Surface Methodology
11. Sugiarto, T., Sugiantoro, B., Supriyana, N., Setyawan, K., and Praharto, Y. (2017, January 29–30). Application of cold dry cutting and coated carbide tool on high-speed turning process against tool wear and surface roughness of Brass MS58. Proceedings of the 2017 1st International Conference on Engineering and Applied Technology (ICEAT), Mataram, Indonesia. IOP Conf. Series: Materials Science and Engineering 2018.10.1088/1757-899X/403/1/012094 ↗
12. Güneşsu, E., and Kaynak, Y. (2019, January 7–9). Investigation of surface integrity and wear performance of 15-5PH martensitic stainless steel material machined using different cutting parameters. Proceedings of the 10th International Congress on Machining, Pamukkale University, Pamukkale, Turkey.
13. Kaçal, A., Çelik, B., and Sertsöz, Ş. (2019, January 24–26). Investigation of surface roughness and tool wear in milling of GGG70 ductile iron. Proceedings of the IMCOFE 2019, Proceeding & Abstract Book, Antalya, Turkey.
14. Improve surface properties by applying an in-hole roller burnishing process to Al 6013 and Ms58 materials
15. Investigation of the effects of cutting parameters on surface roughness and chip formation in turning of AISI 1050 steel10.5505/pajes.2020.06702 ↗
16. Multi-objective optimization of Ms58 brass machining operation by multi-axis CNC lathe10.1007/s13369-020-04984-8 ↗
17. Zohghipour, N., Atay, G., and Kaynak, Y. (2021, January 15–17). Modeling and optimization of drilling operation of lead-free brass alloys considering various cutting tool geometries and copper content. Proceedings of the 18th CIRP Conference on Modeling of Machining Operations, Procedia CIRP, Ljubljana, Slovenia.10.1016/j.procir.2021.09.042 ↗
18. He, J., Liu, X., Li, B., Zhai, J., and Song, J. (2022). Cavitation erosion characteristics for different metal surface and influencing factors in water flowing system. Appl. Sci., 12.10.3390/app12125840 ↗
19. Experimental optimization of factors affecting surface roughness in turning of CW724R brass material
20. Milenin, A., Wróbel, M., Kustra, P., and Němeček, J. (2022). Experimental and numerical study of surface roughness of thin brass wire processed by different dieless drawing processes. Materials, 15.10.3390/ma15010035 ↗
21. Effect of depth of cut and cutting tool geometry on surface roughness and tool wear behavior in machining Al 6061 alloy