journal article·2024-12-02Open access

Deep Rolling Process Modeling Using Finite Element Analysis in Residual Stress Measurement on Rail Head UIC860 Surface

Siwasit Pitjamit, Wasawat Nakkiew, Pinmanee Insua, Adirek Baisukhan, Pattarawadee Poolperm

Applied Sciences· Volume 14· Issue 23

Abstract

This study investigates the effects of deep rolling parameters, pressure, speed, and offset, on the residual stress distribution and material deformation in UIC 860 Grade 900A railway rails. We will model deep rolling to simulate the process and predict the residual stress profile in railway rails. Subsequently, we will rigorously compare and analyze the FEM simulation results with experimental data to optimize deep rolling parameters for improved residual stress distribution. Using both experimental methods and finite element analysis via ANSYS 2023 R1, the study varied deep rolling parameters. Experimental deep rolling pressure was set at 150 bar, speed at 1800 mm/min, and offset at 0.1 mm, while FEA simulations predicted corresponding pressures of 157 bar and speed of 1796.52 mm/min. These parameter settings were chosen to induce significant surface compressive stresses that could enhance the material’s mechanical performance. The experimental results showed an average compressive residual stress of 498.9 MPa, closely aligning with the FEA-predicted value of 502.5 MPa. A paired t-test revealed no statistically significant difference between the two results, with a T-value of −0.22 and a p-value of 0.833, validating the reliability of the FEA model. The consistent deformation observed in both experimental and FEA simulations, especially with a 0.1 mm offset, confirmed that the rolling parameters were effective in producing uniform stress distribution, albeit with a slightly extended processing time due to the small offset. Overall, the findings confirm that optimizing the deep rolling parameters of pressure, speed, and offset leads to favorable residual stress distributions and improved material properties. The results indicate that FEA is a reliable tool for predicting the outcomes of deep rolling, and this study provides a strong foundation for further refinement of the process to enhance performance in practical applications, such as railway rail treatments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Industrial Engineering, Faculty of Engineering, Rajamangala University of Technology Lanna, Chiang Mai 50300, Thailand

Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand

Industrial Engineering Program, School of Engineering, Sripatum University, Bangkok 10900, Thailand

Funding

Chiang Mai University, Thailand

References (41)

Show source-provided references
1. The inducement of residual stress through deep rolling of AISI 1060 steel and its subsequent relaxation under cyclic loading10.1007/s00170-015-6946-0 ↗
2. Finite element analysis of the effect of porosity on residual stress in 2024 aluminium alloy GTAW10.1088/2053-1591/ab906a ↗
3. Noronha, D.J., Sharma, S., Prabhu Parkala, R., Shankar, G., Kumar, N., and Doddapaneni, S. (2024). Deep Rolling Techniques: A Comprehensive Review of Process Parameters and Impacts on the Material Properties of Commercial Steels. Metals, 14.10.3390/met14060667 ↗
4. Numerical Investigation of Lubricated Deep Rolling Process in a Complex Roller Path10.4028/www.scientific.net/AMR.966-967.406 ↗
5. Investigation of the initial residual stress effects on a work roll maximum in-service stress in hot rolling process by a semi-analytical method10.1016/j.jmapro.2023.04.084 ↗
6. Predicting crack initiation for rolling contact on rail having a surface indentation10.1016/j.wear.2023.205041 ↗
7. Fracture behavior and mechanical characterization of R350HT rail steel10.1016/j.prostr.2023.07.015 ↗
8. FEM analysis and optimization of backup and work roll chocks for rolling mill housing by using Ansys 14.510.1063/5.0229485 ↗
9. Numerical thermo-mechanical analysis of a railway train wheel10.1515/mt-2022-0450 ↗
10. Kendall, O., Paradowska, A., Abrahams, R., Reid, M., Qiu, C., Mutton, P., and Yan, W. (2022). Residual Stress Measurement Techniques for Metal Joints, Metallic Coatings and Components in the Railway Industry: A Review. Materials, 16.10.3390/ma16010232 ↗
11. Coupling effects of strain rate and fatigue damage on wheel-rail rolling contact behaviour: A dynamic finite element simulation10.1080/23248378.2022.2083711 ↗
12. Study on the effect of residual stresses on fatigue crack initiation in rails10.1016/j.ijfatigue.2020.105750 ↗
13. On the road towards understanding squats: Residual stress state of rails10.1016/j.prostr.2023.06.004 ↗
14. Kizildemir, S., and Nied, H.F. (2024, January 13–15). Finite Element Analysis of Crack Growth in Steel Rails Subjected to Non-Uniform Residual Stresses: Shelling to Detail Fracture. Proceedings of the ASME/IEEE Joint Rail Conference. American Society of Mechanical Engineers, Columbia, SC, USA. V001T02A001.10.1115/JRC2024-122015 ↗
15. Effect of material non-uniformity and residual stress on wear and transient rolling contact behaviour in laminar plasma quenched (LPQ) rails10.1016/j.wear.2023.204767 ↗
16. Improving fatigue resistance of railway axles by cold rolling: Process optimisation and new experimental evidences10.1016/j.ijfatigue.2020.105603 ↗
17. An investigation about the influence of deep rolling on fatigue crack growth in railway axles made of a medium strength steel10.1016/j.engfracmech.2014.09.016 ↗
18. Decarburisation and rolling contact fatigue of a rail steel10.1016/j.wear.2005.03.005 ↗
19. Application of local fatigue strength approach to assess and optimise the impact of deep rolling on the fatigue performance of railway axles10.1016/j.ijfatigue.2024.108335 ↗
20. Fatigue crack growth in full-scale railway axles–Influence of secondary stresses and load sequence effects10.1016/j.ijfatigue.2019.105360 ↗
21. Bastola, N., Jahan, M.P., Rangasamy, N., and Rakurty, C.S. (2023). A review of the residual stress generation in metal additive manufacturing: Analysis of cause, measurement, effects, and prevention. Micromachines, 14.10.3390/mi14071480 ↗
22. Finite element approach toward an advanced understanding of deep rolling induced residual stresses, and an application to railway axles10.1016/j.matdes.2015.06.026 ↗
23. Rolling contact fatigue of rails finite element modelling of residual stresses, strains and crack initiation10.1243/0954409001531207 ↗
24. Vibrations inside buildings due to subway railway traffic10.1016/j.scitotenv.2015.11.016 ↗
25. Dynamic response analysis of ballasted railway track–ground system under train moving loads using 3D finite element numerical modelling10.1007/s40515-022-00238-2 ↗
26. Graça, A., and Vincze, G. (2021). A short review on the finite element method for asymmetric rolling processes. Metals, 11.10.3390/met11050762 ↗
27. Garnham, J.E., and Davis, C.L. (2009). Rail materials. Wheel–Rail Interface Handbook, Woodhead Publishing.10.1533/9781845696788.1.125 ↗
28. Naik, B.V., Kishor, Y., Saha, S., and Goudar, S.K. (2023). Performance studies on two types of prestressed concrete railway sleepers using finite element model. Mater. Today Proc.10.1016/j.matpr.2023.03.147 ↗
29. Analytical modeling of surface roughness, hardness and residual stress induced by deep rolling10.1007/s11665-016-2486-5 ↗
30. Fretting wear and fatigue in press-fitted railway axle: A simulation study of the influence of stress relief groove10.1016/j.ijfatigue.2018.09.008 ↗
31. Stress-strain state of the metal at the initial stage of railway rail rolling10.3103/S0967091221080155 ↗
32. State of the art of Deep Rolling10.1016/j.precisioneng.2016.05.001 ↗
33. Kukulski, J., Jacyna, M., and Gołębiowski, P. (2019). Finite element method in assessing strength properties of a railway surface and its elements. Symmetry, 11.10.3390/sym11081014 ↗
34. Thadsoongnoen, K., Hasap, A., Noraphaiphipaksa, N., and Kanchanomai, C. (2023). Numerical Investigation of Residual Stress Formation Mechanisms in Flash-Butt Welded Rail. Metals, 13.10.3390/met13081359 ↗
35. A numerical study into element type and mesh resolution for crystal plasticity finite element modeling of explicit grain structures10.1007/s00466-020-01918-x ↗
36. Residual stress analysis in industrial parts: A comprehensive comparison of XRD methods10.1007/s10853-023-09069-z ↗
37. Residual stress measurement techniques for Ti6Al4V parts fabricated using selective laser melting: State of the art review10.1108/RPJ-04-2019-0097 ↗
38. Residual stress and texture control in Ti-6Al-4V wire+ arc additively manufactured intersections by stress relief and rolling10.1016/j.matdes.2018.03.065 ↗
39. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling10.1016/j.jmatprotec.2013.04.012 ↗
40. Steels for rail axles—An overview10.1080/10408436.2022.2137462 ↗
41. Finite element modeling of ultrasonic surface rolling process10.1016/j.jmatprotec.2011.07.009 ↗