Investigating the Effects of the Height-to-Diameter Ratio and Loading Rate on the Mechanical Properties and Crack Extension Mechanism of Sandstone-Like Materials

The causes of the size effect (SE) and loading rate effect (LR) for rocks remain unclear. Based on this, a gypsum-mixed material was used to simulate sandstone, where the dosing ratio was 7.5% river sand, 17.5% quartz, 58.3% α-high-strength gypsum, and 16.7% water. The specimens were designed to have a height-to-diameter ratio (HDR) of 0.6~2, and three strain rates (SRs)—static, quasi-dynamic, and dynamic—were used to perform single-factor rotational uniaxial compression experiments. PFC2D was used to numerically simulate the damage pattern of a sandstone-like specimen. The results showed that the physical parameters did not change monotonically, as was previously found. The main reason for this is that the end-face friction effect (EFE) is generated when the dynamic SR or the HDR is 0.6~1, with a damage pattern of “X”. Under mechanical analysis, the power consumed by the EFE was inversely proportional to the HDR and directly proportional to the LR, and it can reduce the actual amount of energy transferred inside the specimen. This paper may provide a foundation for the study of non-linear hazards in coal and rock.