journal article·2024-10-21Open access

Study on Multi-Crack Damage Evolution and Fatigue Life of Corroded Steel Wires Inside In-Service Bridge Suspenders

Luming Deng, Yulin Deng

Applied Sciences· Volume 14· Issue 20

Abstract

The parallel steel wires used in arch bridge suspenders experience random corrosion damage on their surfaces during service. Corrosion damage, including micro-cracks, pitting, and a combination of both, leads to significant stress concentration under axial loading, which affects the performance of the steel wires. The change in the stress field caused by surface damage alters the stress intensity factor at the crack tip, and the presence of adjacent crack tips significantly amplifies the stress intensity factor, thereby accelerating crack propagation. The development of small surface damages in the steel wires is difficult to control and observe through experiments. By utilizing finite element methods for simulation, it is possible to intuitively analyze the crack propagation process, the trend of stress changes at the crack tip, and the interaction between damages. Numerical simulation results based on Paris’ law indicate that corrosion pits have a certain impact on the stress intensity factor at the crack tip. The propagation process of coplanar double cracks is highly sensitive to the initial crack size and the distance between adjacent crack tips. When the crack spacing is less than the crack depth, the stress intensity factor at the adjacent crack tips exhibits significant amplification. Based on this phenomenon, the coplanar double-crack system can be simplified to a complete single crack for analysis. By comparing the fatigue life of the double-crack system with that of the equivalent single crack, the effectiveness of the simplification rule has been validated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical stress and fatigue analysis · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China

Funding

National Nature Science Foundation of China · Technology Project of Shanxi Transportation Holdings Group Co., Ltd

References (33)

Show source-provided references
1. Effect of cathodic protection current density on corrosion rate of high-strength steel wires for stay cable in simulated dynamic marine atmospheric rainwater10.1016/j.istruc.2020.12.028 ↗
2. Experimental study on corrosion progress of interior bond section of anchor cables under chloride attack10.1016/j.conbuildmat.2014.08.063 ↗
3. Time-Dependent Effect of Corrosion on the Mechanical Characteristics of Stay Cable10.1061/(ASCE)BE.1943-5592.0001229 ↗
4. Hopwood, T., and Havens, J.H. (1984). Inspection, Prevention, and Remedy of Suspension Bridge Cable Corrosion Problems, Kentucky Transportation Research Program, College of Engineering, University of Kentucky.
5. Salas, R.M., Kotys, A.L., West, J.S., Breen, J.E., and Kreger, M.E. (2002). Final evaluation of corrosion protection for bonded internal tendons in precast segmental construction. Research Report 1405-6, Center for Transportation Research, The University of Texas at Austin.
6. Accelerated corrosion and embrittlement of high-strength bridge wire10.1061/(ASCE)0899-1561(2000)12:1(33) ↗
7. Behavior of wires in parallel wire stayed cable under general corrosion effects10.1016/j.jcsr.2013.02.010 ↗
8. Mechanical properties and remaining strength of corroded bridge wires10.2749/101686604777964305 ↗
9. Corrosion and embrittlement in high-strength wires of suspension bridge cables10.1061/(ASCE)1084-0702(2005)10:2(151) ↗
10. Corrosion fatigue failure analysis and service life prediction of high strength steel wire10.1016/j.engfailanal.2020.104440 ↗
11. Experimental assessment of the fatigue strength of corroded bridge wires using non-contact mapping techniques10.1016/j.corsci.2020.109047 ↗
12. Experimental study on the fatigue behavior of corroded steel wire10.1016/j.jcsr.2020.106375 ↗
13. Damage evolution simulation and life prediction of high-strength steel wire under the coupling of corrosion and fatigue10.1016/j.corsci.2019.108368 ↗
14. Effect of environmentally assisted damage on fatigue resistance of tie-down cables after 30 years of service in a cable-stayed bridge10.1016/j.engfailanal.2021.105455 ↗
15. Wang, S., Zhang, D., Hu, N., and Zhang, J. (2016). Effect of stress ratio and loading frequency on the corrosion fatigue behavior of smooth steel wire in different solutions. Materials, 9.10.3390/ma9090750 ↗
16. Experimental and numerical study of the fatigue properties of corroded parallel wire cables10.1061/(ASCE)BE.1943-5592.0000235 ↗
17. Fatigue life prediction for parallel-wire stay cables considering corrosion effects10.1016/j.ijfatigue.2018.05.020 ↗
18. Deng, Y., and Deng, L. (2022). Corrosion Fatigue Test and Performance Evaluation of High-Strength Steel Wires Based on the Suspender of a 11-Year-Old Concrete-Filled Steel Tube Arch Bridge. Coatings, 12.10.3390/coatings12101475 ↗
19. Analysis on damage evolution and corrosion fatigue performance of high-strength steel wire for bridge cable: Experiments and numerical simulation10.1016/j.tafmec.2020.102571 ↗
20. Effects of characteristic parameters of corrosion pits on the fatigue life of the steel wires10.1016/j.jcsr.2019.105879 ↗
21. Fatigue life evaluation model for high-strength steel wire considering different levels of corrosion10.1080/15732479.2021.1951773 ↗
22. Fatigue crack growth of cable steel wires in a suspension bridge: Multiscaling and mesoscopic fracture mechanics10.1016/j.tafmec.2010.03.002 ↗
23. Experimental study and residual fatigue life assessment of corroded high-tensile steel wires using 3D scanning technology10.1016/j.engfailanal.2021.105335 ↗
24. Experimental study on fatigue performance of corroded high-strength steel wires used in bridges10.1016/j.conbuildmat.2018.07.249 ↗
25. A macro-and micro-approach to the anisotropic fatigue behaviour of hot-rolled and cold-drawn pearlitic steel10.1016/j.engfracmech.2014.02.004 ↗
26. Yang, F., Zhang, J., and Zhang, Y. (2023). Modeling Corrosion Product Film Formation and Hydrogen Diffusion at the Crack Tip of Austenitic Stainless Steel. Materials, 16.10.3390/ma16175799 ↗
27. Enviromental factors affecting corrosion of galvanized steel wires10.1061/(ASCE)0899-1561(2004)16:1(1) ↗
28. Fatigue threshold determination in high strength cold drawn eutectoid steel wires10.1016/0013-7944(87)90035-X ↗
29. Stress intensity factors for fatigue cracking of round bars10.1016/0142-1123(81)90059-1 ↗
30. Forman, R.G., and Shivakumar, V. (1986). Growth behavior of surface cracks in the circumferential plane of solid and hollow cylinders. Fracture Mechanics: Seventeenth Volume, ASTM International.10.1520/STP17388S ↗
31. Fracture strength of wires with cracks in suspension bridge
32. Fatigue crack growth and interaction of bridge wire with multiple surface cracks10.1016/j.engfailanal.2020.104739 ↗
33. Deng, L., and Deng, Y. (2024). Temporal and Spatial Variation Study on Corrosion of High-Strength Steel Wires in the Suspender of CFST Arch Bridge. Coatings, 14.10.3390/coatings14050628 ↗