Genesis of Low-Resistivity Shale Reservoirs and Its Influence on Gas-Bearing Property: A Case Study of the Longmaxi Formation in Southern Sichuan Basin

To mitigate the exploration and development risks, it is necessary to have a deeper understanding of the formation mechanism and gas-bearing control factors of low-resistance shale reservoirs. This study focuses on typical shale gas wells (including low-resistivity wells) in Luzhou area, and identification criteria for low-resistance shale reservoirs are redefined as resistivity less than 10 Ω·m and continuous formation thickness greater than 6 m. At the macro scale, low-resistivity shale reservoirs are characterized by high clay mineral content and high water saturation with low gas content. At the micro scale, the main pore size is less than 10 nm, with a small total pore volume but a large specific surface area. Shale reservoirs close to the Class II fault have high water saturation and strong compaction, which hinders the mutual transformation between minerals, resulting in low-resistivity shale with high clay mineral content, small pore volume, and pore size, which promotes the enhancement of reservoir conductivity. The gas content of low-resistivity shale reservoirs is lower, because the distance from the Class II fault is closer, resulting in high water saturation and strong diagenesis, which is not conducive to pore development and shale gas accumulation. When the water saturation exceeds 40%, the pore volume of shale reservoirs rapidly decreases to as low as 0.0074 cm3/g. In order to reduce the risk of exploration and development of the area, the well location deployment needs to be more than 2.8 km away from the Class II fault.