Dynamic Simulation of a 5 Degrees of Freedom Rotor Dropping on a Protective Bearing
Source abstract
Abstract
In the magnetic suspension bearing system, the protection bearing, as its key component, plays a role in supporting the safe operation of the drop rotor after the failure of the magnetic suspension bearing, to protect the whole system from damage. Based on a multi-body dynamics simulation, this paper studied the characteristics of the protection bearing, such as the speed fluctuation of the rotor and the bearing inner ring, and the contact force between the rotor and the protection bearing when the 5-DOF rotor fell on the protection bearing. By adjusting the friction coefficient, the initial speed of the rotor, and other parameters, the movement process of the rotor falling in the protection bearing was studied. By comparing the speed fluctuation and contact force of the rotor and the bearing inner race, the influencing factors and rules of the impact of the rotor falling on the protection bearing were analyzed and summarized.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Dynamics and Control of Mechanical Systems · Hydraulic and Pneumatic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Power Engineering, Naval University of Engineering, Wuhan 430030, China
References (30)
Show source-provided references
1. Research on Dynamics of Magnetic Bearing Rotor Drop on Back-up Bearings
2. Influence of initial state of magnetic suspended rotor on drop to emergency bearing
3. Dynamic simulation of a flexible rotor during drop on retainer bearings10.1016/j.jsv.2007.05.047 ↗
4. Auxiliary bearing system optimization for amb supported rotors based on rotor drop analysis—Part I: Rotor drop analysis method. Asme turbo expo: Turbine technical conference and exposition
5. Rotation speed distribution ratio of double-layer rolling bearings
6. Rotor and Stator rubbing Study of nonlinear dynamics
7. Research on Performance of Protective Bearing Based on Four-point Contact Ball Bearing
8. Research on Impact Force of High-speed Suspended Rotor Falling on Protective Bearing
9. Dynamic analysis of magnetic bearing rotor dropping on radial and axial integrated auxiliary bearing10.1016/j.mechmachtheory.2019.06.015 ↗
10. Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 2: Implementation and results. Proceedings of the Institution of Mechanical Engineers, Part K
11. Dynamic Responses of Rotor Drops onto Double-decker Catcher Bearing10.3901/CJME.2013.01.104 ↗
12. A Data-Driven Insights on Time-to-Failure of Electromechanical Manufacturing Devices: A Procedure and Case Study10.1109/TII.2022.3216629 ↗
13. Dynamic Characteristics of Bearing Protected by Elastic Ring
14. Yu, C., Xu, L., Zhu, Y., and Jin, C. (2014). Auto-Eliminating Clearance Auxiliary Bearing Device for Active Magnetic Bearing Systems. Tribol. Trans., 57.10.1080/10402004.2014.942937 ↗
15. Muszynska, A. (2005). Rotor-to-Stationary Part Rubbing Contact in Rotating Machinery, CRC Press. Chapter 5.
16. A General Theory for Elastically Constrained Ball and Radial Roller Bearings Under Arbitrary Load and Speed Conditions10.1115/1.3662587 ↗
17. Mohammed, W.M., Nejman, M., Castano, F., Martinez Lastra, J.L., Strzelczak, S., and Villalonga, A. (2020, January 10–12). Training an Under-actuated Gripper for Grasping Shallow Objects Using Reinforcement Learning. Proceedings of the 2020 IEEE Conference on Industrial Cyberphysical Systems, ICPS 2020, Tampere, Finland.10.1109/ICPS48405.2020.9274727 ↗
18. Ball motion in angular contact bearings10.1016/0043-1648(68)90515-2 ↗
19. Torque variations in instrument ball bearings
20. Slip Analysis of High Speed Roller Bearing
21. High Speed Dynamic Performance of Cylindrical Roller Bearing with V-shaped pocket
22. Maslen, E.H., Schweitzer, G., and Bleuler, H. (2009). Magnetic Bearings—Theory, Design, and Application to Rotating Machinery, Springer.10.1007/978-3-642-00497-1 ↗
23. Derivation of coefficient of friction at high sliding speeds from energy conservation over the frictional interface10.1016/S0043-1648(00)00509-3 ↗
24. Modeling, Analysis, and Simulation of Auxiliary Bearing for High-speed Rotating Machinery
25. Auxiliary Bearing Life Prediction Using Hertzian Contact Bearing Model10.1115/1.2159036 ↗
26. Research on on-line degradation evaluation of Electromagnetic Bearing Protection
27. Research on the Dynamic Characteristics of Magnetic Bearing-rotor System with Auxiliary Bearing10.1088/1742-6596/1637/1/012140 ↗
28. Dynamic Model of a Deep Groove Ball Bearing Including Localized and Distributed Defects, Part 1: Theory
29. Nonlinear dynamic analysis and experimental verification of a magnetically supported flexible rotor system with auxiliary bearings10.1016/j.mechmachtheory.2017.11.018 ↗
30. Dynamic Analysis of Active Magnetic Bearing Rotor Dropping on Auto-eliminating Clearance Auxiliary Bearing Devices10.1115/1.4029054 ↗