Inverse Kinematics Proposal to Automatize the 3D Scanning of Handball Shoes by Using a Robotic Arm with 3 Actuated Joints
Source abstract
Abstract
The purpose of this paper is to present a procedure for automating the scanning process based on a mathematical model for a handheld 3D scanner for shoes used in some indoor sports. The study aims to use inverse kinematics to automate 3d footwear scanning used for indoor sport (handball) using a robotic arm with three joints. A modeling of the robotic arm and final effector was performed, to simulate the minimum and maximum trajectory of the robot arm according to the angles shown based on the mathematical model and inverse kinematics. With an easy-to-use interface and ergonomic design, this 3D scanning solution offers the versatility to scan various objects (such as scanning two shoe models used in indoor sports) and complex surface types. This scanning manner represents the state of the art of 3D scanning solutions as well as a benchmark in the 3D measurement equipment industry. The data obtained as a result of this research provide new directions and solutions for sports shoe scanning for indoor sports based on scanning trajectories preset by inverse kinematics in order to automate the scanning process using a handheld 3D scanner. Based on the mathematical model presented in the paper, automation of the scanning process can be achieved by maintaining the proposed trajectory using an automated arm operating through a control program that can be run on a simple controller.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Diabetic Foot Ulcer Assessment and Management · Hand Gesture Recognition Systems · Prosthetics and Rehabilitation Robotics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering and Management, Faculty of Management and Technological Engineering, University of Oradea, 1st University Street, 410087 Oradea, Romania
Department of Textiles-Leather and Industrial Management, Faculty of Energy Engineering and Industrial Management, University of Oradea, 1st University Street, 410087 Oradea, Romania
Department of Physical Education, Sport and Physical Therapy, Faculty of Geography, Tourism and Sport, 1st University Street, 410087 Oradea, Romania
Funding
University of Oradea
References (35)
Show source-provided references
1. A Low Cost 3D Foot Scanner for Custom-Made Sports Shoes10.4028/www.scientific.net/AMM.440.369 ↗
2. State of the Art of 3D Scanning Systems and Inspection of Textile Surfaces
3. Okarma, K., and Grudzinski, M. (2012, January 27–30). The 3D Scanning System for the Machine Vision Based Positioning of Workpieces on the CNC Machine Tools. Proceedings of the 2012, 17th International Conference on Methods & Models in Automation & Robotics (MMAR), Miedzyzdroje, Poland.10.1109/MMAR.2012.6347906 ↗
4. Ahmed, A., Ju, H., Yang, Y., and Xu, H. (2023). An Improved Unit Quaternion for Attitude Alignment and Inverse Kinematic Solution of the Robot Arm Wrist. Machines, 11.10.3390/machines11070669 ↗
5. Jiang, J., You, J., and Bi, Y. (2023). Kinematic Modeling and Simulation of a New Robot for Wingbox Internal Fastening Application. Machines, 11.10.3390/machines11070753 ↗
6. (2023, August 03). Automatic Measurements with the SMARTTECH3D Industrial Scanner with KUKA KR CYBERTECH Nano Robot. Available online: https://www.youtube.com/watch?v=9ZfW5pbsn7c.
7. Piperi, E., Galantucci, L.M., Kaçani, J., Shehi, E., and Spahiu, T. (2014, January 20). From 3D foot scans to footwear designing & production. Proceedings of the International Conference of Textile, Tirana, Albania.
8. (Липський, T.M.; Чертенкo, Л.П.; Гаркавенкo, C.C.) The Mathematic Basics of Developing a 3d Shoe Last Shape Using the Reverse Engineering Method
9. Automated Tool Trajectory Generation for Robotized Deburring of Cast Parts Based on 3D Scans10.1016/j.procir.2023.06.087 ↗
10. Baskurt, A.M. (2010). Automation of 3D Scan Data Capturing and Processing, SPIE.
11. Sustainability in Footwear Industry: A Big Data Analysis10.7433/s108.2019.09 ↗
12. Reid, L.F., Vignali, G., Barker, K., Chrimes, C., and Vieira, R. (2020). Technology-Driven Sustainability, Springer International Publishing.
13. Dragoș, P.F., Șuteu, M.D., Pancu, R., and Buhaș, S.D. (2022). Thermal Transfer Analysis for Sports Footwear, for Performance Athletes, during Volleyball Training. Sustainability, 15.10.3390/su15010652 ↗
14. A case study on use of 3D scanning for reverse engineering and quality control10.1016/j.matpr.2021.01.828 ↗
15. Review of reverse engineering systems-current state of the art10.1080/17452759.2017.1302787 ↗
16. Study on the Use of 3D Scanning as a Verification Method in Technical Quality Control10.32754/JMT.2022.1.05 ↗
17. Exploring the Potential of 3D Scanning in Industry 4.0: An Overview
18. Evaluation of Protective Footwear Fit for Older Workers (60+): A Case Study Using 3D Scanning Technique10.1016/j.ergon.2018.04.001 ↗
19. Possibilities of Using Three-Dimensional Optical Scanning in Complex Geometrical Inspection10.5545/sv-jme.2010.152 ↗
20. Fan, C., Wang, H., Cao, Z., Chen, X., and Xu, L. (2022). Path Planning of Autonomous 3-D Scanning and Reconstruction for Robotic Multi-Model Perception System. Machines, 11.10.3390/machines11010026 ↗
21. Wang, X., Xie, Z., Wang, K., and Zhou, L. (2018). Research on a Handheld 3D Laser Scanning System for Measuring Large-Sized Objects. Sensors, 18.10.3390/s18103567 ↗
22. Industrial Perspectives of 3D Scanning: Features, Roles and It’s Analytical Applications
23. Lovato, C., Bissolo, E., Lanza, N., Stella, A., and Giachetti, A. (2014, January 21–22). A Low Cost and Easy to Use Setup for Foot Scanning. Proceedings of the 5th International Conference on 3D Body Scanning Technologies, Lugano, Switzerland.10.15221/14.365 ↗
24. Accuracy investigations of hand-held scanning systems using different dumbbell artefacts10.5194/isprs-archives-XLIII-B2-2022-401-2022 ↗
25. Raza, S.F., Amjad, M., Ishfaq, K., Ahmad, S., and Abdollahian, M. (2023). Effect of Three-Dimensional (3D) Scanning Factors on Minimizing the Scanning Errors Using a White LED Light 3D Scanner. Appl. Sci., 13.10.3390/app13053303 ↗
26. Motley, Darryl (26 July 2018) (2019, April 09). Understanding 3D Scanners: Field of View Explained and How It Impacts Scan Quality. Recovered from: gomeasure3d.com. Available online: https://gomeasure3d.com/blog/understanding-3d-scanners-field-of-view-explained-and-how-it-impacts-scan-quality/.
27. (2023, August 04). GoScan. Available online: https://www.creaform3d.com/en/handheld-portable-3d-scanner-goscan-3d.
28. (2023, August 04). Go!SCAN 3D. Available online: https://cadworks.ro/goscan/.
29. (2023, August 10). VXmodel: Scan-to-Cad Software Module. Available online: https://www.creaform3d.com/en/metrology-solutions/3d-applications-software-platforms/vxmodel-scan-cad-software-module.
30. (2023, August 10). 1 Scan and Merge with VXelement. Available online: https://www.youtube.com/watch?v=2fFkdfyuSoo.
31. (2023, August 10). Creaform VX Model—Reverse Engineering (Part 1). Available online: https://www.youtube.com/watch?v=6DPVVnOPxCA.
32. (2023, August 10). VXelements 3-Scan Align and Merge Workflow. Available online: https://www.youtube.com/watch?v=R2HG5kU1WM4.
33. (2023, August 10). Creaform ACADEMIA: How to Prepare a Scanned Part for 3D Printing Using VXmodel. Available online: https://www.youtube.com/watch?v=-RDie7p7dWY.
34. (2023, August 08). How Structured-Light 3D Scanners Work (with Video Demonstrations). Recovered from: gomeasure3d.com. Available online: https://gomeasure3d.com/blog/how-structured-light-3d-scanners-work-video/.
35. (2023, August 08). 3D Scanning 101, How to Choose Digitizing Technologies. Available online: https://www.digitalengineering247.com/article/3d-scanning-101.