An Analysis of the Stress State in Powder Compacts during Unloading, Emphasizing the Influence from Different Frictional Models
Source abstract
Abstract
Finite element (FE) simulations are frequently used nowadays in order to analyse powder compaction and sintering, for example, when determining the shape of a cutting blank insert. Such analyses also make it possible to determine in detail the stress state in a powder compact during loading and unloading. This is certainly important as (residual) tensile stresses can lead to cracking, either after unloading or during the subsequent sintering step. The magnitude of plastic deformation is also an issue here. Concerning the stress state in the powder compact, the frictional behaviour (between walls and powder compact) is of great importance. For this reason, in the present study, two frictional models are implemented into a commercial FE software, and numerical results based on the stress state before and during unloading are derived. The two friction models produce quite different results, and it is obvious that the frictional behaviour at powder pressing has to be carefully accounted for in order to achieve results of high accuracy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Unit of Solid Mechanics, Department of Engineering Mechanics, KTH Royal Institute of Technology, SE-10044 Stockholm, Sweden
Sandvik Coromant, SE-12680 Stockholm, Sweden
References (34)
Show source-provided references
1. Haglund, S., Ågren, J., Lindskog, P., and Uhrenius, B. (1996). Sintering Technology, Taylor & Francis Group.
2. Determination of the Frictional Behavior at Compaction of Powder Materials Consisting of Spray-Dried Granules10.1007/s11665-018-3205-1 ↗
3. Evaluation of an advanced powder-die frictional model10.1016/j.powtec.2020.01.048 ↗
4. Constitutive Data and Friction Measurements of Powders Using Instrumented Die10.1179/003258901666130 ↗
5. A Constitutive Model for Compaction of Granular Media, with Account for Deformation Induced Anisotropy10.1002/(SICI)1099-1484(199907)4:4<391::AID-CFM68>3.0.CO;2-0 ↗
6. Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media10.1115/1.3443401 ↗
7. Constitutive model for powder materials10.1016/0032-5910(91)80149-D ↗
8. Improvement in robustness and computational efficiency of material models for finite element analysis of metal powder compaction and experimental validation10.1007/s00170-013-4977-y ↗
9. Analysis of compressibility behavior and development of a plastic yield model for uniaxial die compaction of sponge titanium powder10.1016/j.jmatprotec.2016.12.004 ↗
10. Numerical Simulation on Pharmaceutical Powder Compaction10.4028/www.scientific.net/MSF.575-578.560 ↗
11. Inverse Modeling Applied for Material Characterization of Powder Materials10.1520/JTE20130266 ↗
12. Bui, H.D., Tanaka, M., Bonnet, M., Maigre, H., Luzzato, E., and Reynier, M. (1994). Inverse Problems in Engineering Mechanics, A. A. Balkema.
13. A Numerical Study of Material Parameter Sensitivity in the Production of Hard Metal Components Using Powder Compaction10.1007/s11665-014-0989-5 ↗
14. Estimation of constitutive parameters for powder pressing by inverse modeling10.1007/s00158-005-0556-7 ↗
15. Modeling the powder compaction process using the finite element method and inverse optimization10.1007/s00170-011-3211-z ↗
16. Experimental Studies of Frictional Behaviour of Hard Metal Powders Sliding on Cemented Carbide Walls
17. Powder-Wall Friction: The Effects of Orientation of Wall Grooves and Wall Lubricants10.1016/0032-5910(77)80010-7 ↗
18. The Frictional Behavior of Tungsten and Molybdenum Powders Sliding on Die Materials10.1016/0032-5910(83)85025-6 ↗
19. An Experimental Device for Material Characterization of Powder Materials10.1520/JTE20120107 ↗
20. On the Influence of Material Parameters in a Complex Material Model for Powder Compaction10.1007/s11665-016-2294-y ↗
21. Hallqvist, J.O. (2006). LS-Dyna Theory Manual, Livermore Software Technology Corporation.
22. (2018). LS-Dyna Keyword User’s Manual II, Material Models, Livermore Software Technology Corporation.
23. Tabor, D. (1951). Hardness of Metals, Cambridge University Press.
24. The correlation of indentation experiments10.1016/0022-5096(70)90029-3 ↗
25. Johnson, K.L. (1985). Contact Mechanics, Cambridge University Press.10.1017/CBO9781139171731 ↗
26. Plastic indentation in metals with cones10.1016/0022-5096(65)90018-9 ↗
27. A study of the mechanics of microindentation using finite elements10.1557/JMR.1992.0618 ↗
28. Measurement of residual stresses in Al2O3/Ni laminated composites using an X-ray diffraction technique10.1007/BF00356131 ↗
29. Hole-drilling strain-gage method of measuring residual stresses10.1007/BF02326825 ↗
30. La mesure des contraintes résiduelles. Méthode de la flèche. Méthode de la source des contraintes, Application au grenaillage de précontrainte et à d’autres traitements superficiels
31. Study of Lime Hemp Composite Precasting by Compaction of Fresh Mix—An Instrumented Die to Measure Friction and Stress State10.1016/j.powtec.2014.03.002 ↗
32. Impact of Sample Dimensions, Soil-Cylinder Wall Friction and Elastic Properties of Soil on Stress Field and Bulk Density in Uniaxial Compression Tests10.1016/j.still.2018.12.021 ↗
33. Influence of the Punch Speed on the Die Wall/Powder Kinematic Friction during Tableting10.1016/j.xphs.2019.05.007 ↗
34. Experimental Study of Static and Dynamic Behavior of Concrete under High Confinement: Effect of Coarse Aggregate Strength10.1016/j.mechmat.2015.09.005 ↗