A Numerical Simulation Study on DC Positive Corona Discharge Characteristics at the Conductor’s Tip Defect
Source abstract
Abstract
For investigating the relationship between the surface corona discharge of a DC wire and other influencing factors, a hybrid numerical model based on a fluid-chemical reaction was proposed to simulate the discharge process at the tip defect of the wire. Under different defect geometries and gas pressures achieved via simulation, the microscopic process of the reaction and movement of electrons and heavy particles during a positive corona discharge was studied, and characteristic parameters such as corona inception voltage and discharge current were analyzed. Furthermore, through the corona cage test, for a specific electrode configuration, corona inception voltages under different pressures were compared and verified, which showed that the model was reasonable. The results showed that the maximum electron density of the streamer head was about 1 × 1020 m−3, the rise time of the pulse current was about 10 ns, and the decay time was about 300–500 ns. The corona inception voltage decreased with an increase in the tip height and decreases in the tip curvature radius, conductor radius, and background air pressure; the amplitude of the pulse current increased with increases in the wire radius and curvature radius of the defect tip and decreases in tip height and background air pressure. The experimental results are consistent with the simulation results, which verifies the reasonability of the model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aerosol Filtration and Electrostatic Precipitation · High voltage insulation and dielectric phenomena · Plasma Applications and Diagnostics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Alternate Electrical Power System with Renewable Energy Source, North China Electric Power University, Beijing 102206, China
Department of Computer Application Technology, Huazhong Electric Power Union Staff University, Wuhan 430014, China
References (36)
Show source-provided references
1. Conductor surface conditions effects on audible noise spectrum characteristics of positive corona discharge10.1109/TDEI.2016.005399 ↗
2. The effect of air pressure on the surface electric field intensity characteristics under negative DC corona discharge in a corona cage10.1016/j.ijepes.2019.05.050 ↗
3. Ren, X., Jiang, X., Yang, G., Huang, Y., Wu, J., and Yang, Z. (2022). Effect of environmental parameters on streamer discharge in short air gap between rod and plate. Energies, 15.10.3390/en15030817 ↗
4. Temperature and density effects on the properties of a long positive streamer in air10.1088/0022-3727/29/11/021 ↗
5. Development of a cathode-directed streamer discharge in air at different pressures: Experiment and comparison with direct numerical simulation10.1103/PhysRevE.71.016407 ↗
6. Effect of relative humidity on electron distribution and ozone production by DC coronas in air10.1109/TPS.2005.844530 ↗
7. Effect of relative humidity on the surface electric field intensity characteristics under DC voltage in a corona cage
8. Humidity effects on the ground-level resultant electric field of positive DC conductors10.1088/2058-6272/ab0a3f ↗
9. Impact of conductor surface type and rain intensity on HVDC corona losses10.1109/TPWRD.2015.2424315 ↗
10. High altitude effect on corona inception voltages of DC power transmission conductors based on the mobile corona cage10.1109/TPWRD.2013.2258818 ↗
11. Lekganyane, M.J., Ijumba, N.M., and Britten, A.C. (2006, January 22–26). Corona audible noise measurements in a small indoor corona cage under HVDC voltages. Proceedings of the 2006 International Conference on Power System Technology, Chongqing, China.10.1109/ICPST.2006.321753 ↗
12. DC corona characteristics derived from corona cage tests and simulations10.1109/TDEI.2019.008197 ↗
13. Modified peek formula for calculating positive DC Corona inception electric field under variable humidity10.1109/TDEI.2012.6260014 ↗
14. Effects of rod radius and voltage on streamer discharge in a short air gap10.1088/2058-6272/acc16c ↗
15. Kinetic study of key species and reactions of atmospheric pressure pulsed corona discharge in humid air10.1088/2058-6272/ac4693 ↗
16. Corrigendum: Kinetic modelling for an atmospheric pressure argon plasma jet in humid air10.1088/0022-3727/47/7/079502 ↗
17. Reaction pathways of biomedically active species in an Ar plasma jet10.1088/0963-0252/23/3/035015 ↗
18. Modeling plasma-based CO2 and CH4 conversion in mixtures with N2, O2, and H2O: The bigger plasma chemistry picture10.1021/acs.jpcc.7b10619 ↗
19. Main species and chemical pathways in cold atmospheric-pressure Ar + H2O plasmas10.1088/1361-6595/aa5c22 ↗
20. Numerical simulation of trichel pulse characteristics in bar-plate DC negative corona discharge
21. Numerical simulation of the characteristics of heavy particles in bar-plate DC positive corona discharge based on a hybrid model10.1109/TPS.2014.2302474 ↗
22. Analysis of various scenarios of the behavior of voltage-current characteristics of direct-current microdischarge at atmospheric pressure10.1134/S0021364016150145 ↗
23. Feng, N., Ma, T., Chen, C., Yao, B., and Gao, W. (2022). Simulation and study of DC corona discharge characteristics of bar-plate gap. Energies, 15.10.3390/en15176431 ↗
24. Electro-hydrodynamics and kinetic modeling of dry and humid air flows activated by corona discharges10.1088/1009-0630/18/5/04 ↗
25. Kinetic study on non-thermal volumetric plasma decay in the early afterglow of air discharge generated by a short pulse microwave or laser10.1063/1.4961951 ↗
26. 3D PIC-MCC simulation of corona discharge in needle-plate electrode with external circuit10.1088/1361-6595/ab6755 ↗
27. Numerical modelling of atmospheric pressure gas discharges leading to plasma production10.1088/0022-3727/38/20/R01 ↗
28. The LXCat project: Electron scattering cross sections and swarm parameters for low temperature plasma modeling10.1016/j.chemphys.2011.04.020 ↗
29. (2023, February 15). Gas Discharge Plasma Database (GPLAS). (In Chinese).
30. Atmospheric pressure methane–hydrogen dc micro-glow discharge for thin film deposition10.1088/0022-3727/41/17/175202 ↗
31. Spatially hybrid computations for streamer discharges with generic features of pulled fronts: I. Planar fronts10.1016/j.jcp.2009.09.027 ↗
32. Solving the Boltzmann equation to obtain electron transport coefficients and rate coefficients for fluid models10.1088/0963-0252/14/4/011 ↗
33. Numerical simulation of direct current glow discharge in air with experimental validation10.1143/JJAP.51.026001 ↗
34. Corona discharge processes10.1109/27.125038 ↗
35. Modes of corona discharges in air10.1109/TPAS.1968.292211 ↗
36. Zogning, C., Lobry, J., and Moiny, F. (2020, January 13–17). Comparison between positive and negative corona discharges by hydrodynamic plasma simulations. Proceedings of the 2020 International Symposium on Electrical Insulating Materials (ISEIM), Tokyo, Japan.