The Hypoplastic Constitutive Model for Sandy Soil Considering the Rotation of the Principal Stress Axis

Considering the influence of fabric on the critical state of sandy soil, an anisotropic hypoplastic constitutive model is developed by introducing the anisotropic critical state line that takes into account the rotation of the principal stress axes. With the introduction of new anisotropic state variables defined by the joint invariants of the stress tensor and fabric tensor, the critical state equation of sandy soil is established to describe the effects of three factors, namely, anisotropic parameters, stress states, and the relationship between principal stresses and fabric directions, on the critical state. The mechanical response of sandy soil under different deposition angles can be described by considering the rotation of principal stresses relative to the fabric. The application range of Wu et al.’s isotropic hypoplastic model (2017) is extended by incorporating the effect of principal stress rotation on the stress–strain relationship of sandy soil. Based on a series of Toyoura sand plane strain tests, the effects of void ratio, confining pressure, and principal stress axis rotation angle on anisotropic strength and deformation characteristics are simulated under low confining pressure. Furthermore, a comparison with Wu’s transversely isotropic hypoplastic model (1998) is made regarding their simulation performances. The proposed model exhibits a balanced performance when simulating the variation of anisotropy in both strength and deformation with respect to the rotation angle, without being overestimated within a certain range of rotation angles. The prediction results demonstrate, to a certain degree, the validity and effectiveness of the proposed model.