Experimental Evaluation of Load Distribution between Piles in Case of Block Failure
Source abstract
Abstract
In this study, the load distribution of the piles in the pile group was investigated in the case of the pile raft foundations failure under the effect of vertical loads in cohesive soils. For this purpose, loading tests were carried out on model pile groups in the laboratory. In addition, the effects of these conditions on the load distribution between the piles were examined by changing the pile spacing and soil properties. As a result of the experiments, it was determined that the piles in the corner region carried more load than the ones in the center region in small settlement amounts as in the literature. However, it has been determined that as the amount of settlement in the pile foundation increases, the soil between piles behaves like a block and approaches failure, and the piles in the center region of the pile group carry more load. As a result of excessive settlement, a fracture surface formed around the block and therefore the corner piles of the block began to carry less load. It has been determined that failure analyses should be performed considering the load carried by the corner piles after failure due to excessive settlement.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Engineering Faculty, Firat University, Elazig 23100, Turkey
Department of Civil Engineering, Technology Faculty, Firat University, Elazig 23100, Turkey
Funding
Firat University Scientific Research Projects Coordination Unit (FUBAP)
References (38)
Show source-provided references
1. Bilgen, G., Houlihan, M., Ryoo, S., Wang, Y., and Aydilek, A.H. (2021). Hydraulic and environmental compatibility of RCA with filters and subgrades in highways. Environ. Geotech.10.1680/jenge.20.00040 ↗
2. Sustainable re-use of waste glass, cement and lime treated dredged material as pavement material
3. Experiments with Model Piles in Groups10.1680/geot.1957.7.4.147 ↗
4. Katzenbach, R., Arslan, U., and Moormann, C. (2000). Piled raft foundation projects in Germany. Des. Appl. Raft Found., 323–391.10.1680/daorf.27657.0013 ↗
5. Mandolini, A., Russo, G., and Viggiani, C. Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, Osaka, Japan, 12–16 September 2005, AA Balkema Publishers.
6. Analysis and Performance of Piled Rafts Designed Using Innovative Criteria10.1061/(ASCE)1090-0241(2008)134:8(1118) ↗
7. In-situ measurements of pile-to-pile load distribution in foundations10.1007/s11204-010-9074-8 ↗
8. Load tests on full-scale bored pile groups10.1139/t2012-087 ↗
9. Katzenbach, R., and Moormann, C. (2001, January 27–31). Recommendations for the design and construction of piled rafts. Proceedings of the Fifteenth International Conference on Soil Mechanics and Geotechnical Engineering, Istanbul, Turkey.
10. Settlement and Load Distribution Analysis of Pile Groups
11. Analysis of Piled Raft Foundations Using a Variational Approach10.1061/(ASCE)1532-3641(2001)1:2(129) ↗
12. Generalized Solutions for Axially and Laterally Loaded Piles in Multilayered Soil Deposits with Transfer Matrix Method10.1061/(ASCE)GM.1943-5622.0000800 ↗
13. Behavior of Piled Raft Foundations Under Lateral and Vertical Loading10.1061/(ASCE)1532-3641(2002)2:1(29) ↗
14. Kazık Gruplarında Eksenel Yük Dağılımının Bulunması için Yeni bir Yöntem
15. Comprehensive group pile settlement formula based on 3D finite element analyses10.1016/j.sandf.2017.11.012 ↗
16. New Approach to Group Pile Load Estimation10.1061/(ASCE)GM.1943-5622.0001374 ↗
17. Wedge Failure Analysis of Slopes in Highly Jointed Rock Masses in the Zones of High Seismicity10.1007/s40098-022-00600-8 ↗
18. Ergun, U.M., and Turkmen, K.H. (2023, March 01). Kazıklı Radye Temellerin Etkin Tasarımı. Available online: https://open.metu.edu.tr/bitstream/handle/11511/50017/T0RRMU9Uaz0.pdf.
19. Settlement Profile and Pile Load Distribution Under Vertical Load of Piled Raft Foundation in Clay10.1007/s10706-020-01359-6 ↗
20. Experimental Study of Eccentrically Loaded Raft with Connected and Unconnected Short Piles10.1061/(ASCE)GT.1943-5606.0000341 ↗
21. Distribution of Stresses in Unreinforced and Reinforced Soils Induced by a Circular Foundation
22. A systematic approach for the analyses and design of jointed rock mass slopes against wedge and toppling failures: A case study of the stability of the abutments of the bridge across the Chenab River10.1080/19386362.2018.1480151 ↗
23. Soil arching and load transfer mechanism for slope stabilized with piles10.3846/13923730.2012.723353 ↗
24. A new design chart for estimating friction angle between soil and pile materials
25. Yanal Yüklü Bir Model Kaziğin Kum Ortamindaki Davranişinin Deneysel Ve Nümerik Yöntemlerle İncelenmesi
26. Forensic analysis of a pile foundation failure10.1016/j.engfailanal.2009.09.008 ↗
27. Numerical analysis of pile-soil system under seismic liquefaction10.1016/j.engfailanal.2018.07.031 ↗
28. Investigation on determining uplift capacity and failure mechanism of the pile groups in sand10.1016/j.oceaneng.2020.108145 ↗
29. Wang, Y., Zou, X., and Hu, J. (2021). Bearing Capacity of Single Pile-Friction Wheel Composite Foundation on Sand-over-Clay Deposit under V-H-M Combined Loadings. Appl. Sci., 11.10.3390/app11209446 ↗
30. Zhang, J., Wang, X., Wang, H., and Qin, H. (2020). Model Test and Numerical Simulation of Single Pile Response under Combined Loading in Slope. Appl. Sci., 10.10.3390/app10176140 ↗
31. (2013). Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate (Standard No. ASTM C127-15).
32. (2014). Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer 1 (Standard No. ASTM D 854-14).
33. (2007). Standard Test Method for Particle-Size Analysis of Soils (ASTM 2016) (Standard No. ASTM D422-63(2007)e2).
34. (2004). Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Standard No. ASTM D3080-03).
35. Group Effect on Driven Piles under Lateral Load10.1061/(ASCE)1090-0241(1997)123:8(702) ↗
36. Bearing Capacity of Footings on Vibratory Compacted Sand
37. Wood, D.M. (2004). Geotechnical Modelling (Applied Geotechnics, Volume 1), Taylor & Francis Group/Books.
38. Pile and Pile Group Capacity: Some Findings from Centrifuge Tests