journal article·2023-02-10Open access

An Aeroacoustic Study of Full-Scale and Small-Scale Generic Landing Gear Models with Identical Geometry

Victor Kopiev, Ivan Belyaev, Mikhail Zaytsev, Kun Zhao

Applied Sciences· Volume 13· Issue 4

Abstract

The paper reports on the results of acoustic measurements of full-scale and small-scale generic landing gear models, which have identical geometry and differ only by their scales. The large-scale landing gear models were simplified and lack small geometric details, which for the first time allows their results to be directly compared with those for the small-scale models of the same geometry. It is shown that after application of the scaling procedure to their noise spectra, the normalized results for broadband noise of the landing gear models of different scales are in good agreement with each other. This result seems to support the feasibility of developing technologies for low-frequency noise reduction of landing gears based on small-scale tests and allowing refinement of semi-empirical models of noise prediction for different landing gear elements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vehicle Noise and Vibration Control · Aerodynamics and Fluid Dynamics Research · Aerodynamics and Acoustics in Jet Flows

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Central Aerohydrodynamic Institute (TsAGI), 105005 Moscow, Russia

China Aerodynamics Research and Development Center, Mianyang 621000, China

Funding

Ministry of Science and Higher Education of the Russian Federation

References (26)

Show source-provided references
1. Airframe Noise
2. Almost 40 Years of Airframe Noise Research: What Did We Achieve?10.2514/1.44457 ↗
3. Noise Reduction Technologies for Aircraft Landing Gear—A Bibliographic Review10.1016/j.paerosci.2019.100589 ↗
4. Sound radiation from aircraft Wheel-Well/Landing-Gear configurations10.2514/3.58851 ↗
5. Hayes, J., Horne, W., Soderman, P., and Bent, P. (1997, January 12–14). Airframe Noise Characteristics of a 4.7 Percent Scale DC-10 Model. Proceedings of the 3rd AIAA/CEAS Aeroacoustics Conference, Atlanta, GA, USA.10.2514/6.1997-1594 ↗
6. Stoker, R., and Sen, R. (2001, January 8–11). An experimental investigation of airframe noise using a model-scale Boeing 777. Proceedings of the 39th Aerospace Sciences Meeting and Exhibit, Reno, NV, USA.10.2514/6.2001-987 ↗
7. Jaeger, S., Burnside, N., Soderman, P., Horne, W., and James, K. (2002, January 17–19). Microphone array assessment of an isolated, 26%-scale, high-fidelity landing gear. Proceedings of the 8th AIAA/CEAS Aeroacoustics Conference & Exhibit, Breckenridge, CO, USA.10.2514/6.2002-2410 ↗
8. Horne, W.C., Burnside, N.J., Soderman, P.T., Jaeger, S.M., Reinero, B.R., James, K.D., and Arledge, T.K. (2023, January 24). Aeroacoustic Study of a 26%-Scale Semispan Model of a Boeing 777 Wing in the NASA Ames 40-by 80-Foot Wind Tunnel, NASA Report 20060048307, Available online: https://ntrs.nasa.gov/citations/20060048307.
9. Horne, W., James, K., Arledge, T., Soderman, P., Burnside, N., and Jaeger, S. (2005, January 23–25). Measurements of 26%-scale 777 airframe noise in the NASA Ames 40-by 80 Foot Wind Tunnel. Proceedings of the 11th AIAA/CEAS Aeroacoustics Conference (26th AIAA Aeroacoustics Conference), Monterey, CA, USA.10.2514/6.2005-2810 ↗
10. Noise spectra and directivity for a scale-model landing gear10.1260/147547209788549316 ↗
11. ANOPP landing-gear noise prediction with comparison to model-scale data10.1260/147547209788549299 ↗
12. Dobrzynski, W., and Buchholz, H. (1997, January 12–14). Full-scale noise testing on Airbus landing gears in the German Dutch wind tunnel. Proceedings of the 3rd AIAA/CEAS Aeroacoustics Conference, Atlanta, GA, USA.10.2514/6.1997-1597 ↗
13. Dobrzynski, W., Chow, L., Guion, P., and Shiells, D. (2000, January 12–14). A European study on landing gear airframe noise sources. Proceedings of the 6th Aeroacoustics Conference and Exhibit (21st AIAA Aeroacoustics Conference), Lahaina, HI, USA.10.2514/6.2000-1971 ↗
14. Experimental study on aircraft landing gear noise10.2514/1.11085 ↗
15. Noise characterization of a full-scale nose landing gear10.2514/1.C034750 ↗
16. Feasibility of measuring noise sources on a detailed nose landing gear at low cost development10.1016/j.apacoust.2021.108263 ↗
17. Identification and attenuation of a tonal-noise source on an aircraft’s landing gear10.2514/1.43183 ↗
18. Measurement and control of aircraft landing gear broadband noise10.1016/j.ast.2011.07.009 ↗
19. Yokokawa, Y., Murayama, M., Takaishi, T., Ura, H., Kohzai, M., Ito, Y., and Hayama, K. (2018, January 25–29). Acoustic Wind Tunnel Test with 18% Scale Half-span Model toward FQUROH Second Flight Demonstration. Proceedings of the 2018 AIAA/CEAS Aeroacoustics Conference, Atlanta, GA, USA.10.2514/6.2018-4086 ↗
20. Ueno, Y., Isotani, K., Hayama, K., Takaishi, T., Ito, Y., Yokokawa, Y., and Yamamoto, K. (2019, January 20–23). Validation of Noise Reduction Design for Landing Gear in the FQUROH Flight Demonstration Project. Proceedings of the 25th AIAA/CEAS Aeroacoustics Conference, Delft, The Netherlands.10.2514/6.2019-2506 ↗
21. Experimental Study of Truncated-Cylinder Struts for Noise Reduction of Large-Scale Landing Gears10.1016/j.jsv.2021.116362 ↗
22. Parametric study of nose landing gear noise in a large-scale aeroacoustic wind tunnel10.1016/j.apacoust.2022.109130 ↗
23. Refraction of sound by a shear layer10.1016/0022-460X(78)90353-X ↗
24. Jiao, J. (2017). Aeroacoustic Wind Tunnel Correction Based on Numerical Simulation. [Ph.D. Thesis, Technische Universität Braunschweig]. Available online: https://elib.dlr.de/113499/.
25. Huang, L., Zhao, K., Liang, J., Kopiev, V., Belyaev, I., and Zhang, T. (2021). A Numerical Study of the Wind Speed Effect on the Flow and Acoustic Characteristics of the Minor Cavity Structures in a Two-Wheel Landing Gear. Appl. Sci., 11.10.3390/app112311235 ↗
26. Atmospheric Absorption of Sound: Update10.1121/1.400176 ↗