journal article·2023-01-13Open access

Conditions for and Characteristics of the Dispersion of Gel Fuel Droplets during Ignition

Dmitriy Feoktistov, Evgeniya Orlova, Dmitriy Glushkov, Akram Abedtazehabadi, Saveliy Belyaev

Applied Sciences· Volume 13· Issue 2

Abstract

We formulated and experimentally proved a hypothesis on the causes of dispersion (puffing and microexplosion) of binary fuel droplets, including those in the composition of gel fuels. This hypothesis is based on the concepts of wetting thermodynamics and the theory of the two-component surface energy of substances and materials. An effective and reliable criterion was established that allowed the assessment of the possibility of the onset of puffing and microexplosion during the high-temperature heating of binary liquids. Microexplosions were found to occur only when isothermal conditions were necessarily reached at the liquid–liquid interface during the mixing of mutually insoluble components, provided that one component had to be polar, and the second had to be dispersive. In addition, it was necessary to provide external heating conditions under which the value of the surface free energy of the liquid–liquid interface formation tended to zero.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Coal Combustion and Slurry Processing · Thermochemical Biomass Conversion Processes · Environmental and Industrial Safety

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Heat and Mass Transfer Laboratory, National Research Tomsk Polytechnic University, 634050 Tomsk, Russia

School of Energy & Power Engineering, National Research Tomsk Polytechnic University, 634050 Tomsk, Russia

Funding

Russian Science Foundation

References (38)

Show source-provided references
1. Gel Fuels Based on Oil-Filled Cryogels: Corrosion of Tank Material and Spontaneous Ignition10.1016/j.cej.2020.127765 ↗
2. Recent Advances in the Combustion of Water Fuel Emulsion10.1016/S0360-1285(02)00005-9 ↗
3. Experimental Studies on Coal-Water Slurry Fuel Prepared from Pretreated Low-Grade Coal10.1080/19392699.2019.1666830 ↗
4. Composition of Gas Produced from the Direct Combustion and Pyrolysis of Biomass10.1016/j.psep.2021.09.039 ↗
5. Effective Incineration of Fuel-Waste Slurries from Several Related Industries10.1016/j.envres.2019.108559 ↗
6. Observation of Sooting Behavior in an Emulsion Droplet Flame by Planar Laser Light Scattering in Microgravity10.1016/S0082-0784(96)80342-0 ↗
7. The Characteristics of Puffing of the Carbonated Emulsified Fuel10.1016/j.ijheatmasstransfer.2009.02.033 ↗
8. Differences of Two-Component Droplets Breakup at the High Temperatures10.1016/j.joei.2019.02.005 ↗
9. Use of Breakup Time Data and Velocity History Data to Predict the Maximum Size of Stable Fragments for Acceleration-Induced Breakup of a Liquid Drop10.1016/0301-9322(87)90063-2 ↗
10. Study of the Micro-Explosion Temperature of Water in Oil Emulsion Droplets during the Leidenfrost Effect10.1016/j.expthermflusci.2012.03.027 ↗
11. Evaporation, Boiling and Explosive Breakup of Oil–Water Emulsion Drops under Intense Radiant Heating10.1016/j.cherd.2017.09.008 ↗
12. Using Planar Laser Induced Fluorescence to Explore the Mechanism of the Explosive Disintegration of Water Emulsion Droplets Exposed to Intense Heating10.1016/j.ijthermalsci.2018.01.027 ↗
13. Parametric Study of the Micro-Explosion Occurrence of W/O Emulsions10.1016/j.ijthermalsci.2018.07.016 ↗
14. Physics of Puffing and Microexplosion of Emulsion Fuel Droplets10.1063/1.4897918 ↗
15. Experimental Evaluation of the Effect of Emulsion Stability on Micro-Explosion Phenomena for Water-in-Oil Emulsions10.1016/j.fuel.2013.08.073 ↗
16. Visualization of Aggregation Process of Dispersed Water Droplets and the Effect of Aggregation on Secondary Atomization of Emulsified Fuel Droplets10.1016/j.proci.2010.05.115 ↗
17. Puffing and Microexplosion Behavior of Water in Pure Diesel Emulsion Droplets During Leidenfrost Effect10.1080/00102202.2016.1275593 ↗
18. Bubble Nucleation Mechanisms of Liquid Droplets Superheated in Other Liquids10.1016/0021-9797(75)90240-4 ↗
19. Experimental Study on Influence of Surfactant Dosage on Micro Explosion Occurrence in Water in Diesel Emulsion10.4028/www.scientific.net/AMM.819.287 ↗
20. Breakup and Explosion of Droplets of Two Immiscible Fluids and Emulsions10.1016/j.ijthermalsci.2019.04.011 ↗
21. An Explosive Disintegration of Heated Fuel Droplets with Adding Water10.1016/j.cherd.2018.10.031 ↗
22. Combustion Characteristics of Inorganic Kerosene Gel Droplet with Fumed Silica as Gellant10.1016/j.expthermflusci.2019.01.031 ↗
23. Experimental Studies the Burning Process of Gelled Unsymmetrical Dimethylhydrazine Droplets under Oxidant Convective Conditions10.1016/j.fuel.2013.03.071 ↗
24. Like Dissolves like: A First-Principles Theory for Predicting Liquid Miscibility and Mixture Dielectric Constant10.1126/sciadv.abe7275 ↗
25. Conditions and Characteristics of Droplets Breakup for Industrial Waste-Derived Fuel Suspensions Ignited in High-Temperature Air10.1016/j.fuel.2019.116915 ↗
26. Alekseev, V.A. (1972). Handbook of Thermophysical Properties of Gases and Liquids, Nauka.
27. Volkov, A.I., and Zharsky, I.M. (2005). Big Chemical Reference Book, Modern School.
28. Contact Angles, Work of Adhesion, and Interfacial Tensions at a Dissolving Hydrocarbon Surface10.1016/0021-9797(87)90280-3 ↗
29. Components of Solid Surface Free Energy from Wetting Measurements10.1016/0021-9797(73)90201-4 ↗
30. The Effect of Composition and Thermodynamics on the Surface Morphology of Durable Superhydrophobic Polymer Coatings10.2147/NSA.S123447 ↗
31. Koerner, G., Rossmy, G., and Sanger, G. (1974). Oberflächen und Grenzflächen. Ein Versuch, diephysikalisch-chemischen Grundgrößen darzustellen und sie mit Aspekten der Anwendungstechnik zu verbinden. Goldschmidt Informiert Essen No. 29, Goldschmidt AG.
32. Studies on the Surface Free Energy and Surface Structure of PTFE Film Treated with Low Temperature Plasma10.1002/(SICI)1097-4628(19970328)63:13<1733::AID-APP4>3.0.CO;2-H ↗
33. Experimental Determination of the Surface Energy of Polycrystalline Ice10.1134/S0012501614120045 ↗
34. Estimation of the Surface Free Energy of Polymers10.1002/app.1969.070130815 ↗
35. Influence of Roughness on Polar and Dispersed Components of Surface Free Energy and Wettability Properties of Copper and Steel Surfaces10.1016/j.surfcoat.2021.127518 ↗
36. Recent Progress in Axisymmetric Drop Shape Analysis (ADSA)10.1016/j.cis.2006.06.001 ↗
37. A High-Accuracy Polynomial Fitting Approach to Determine Contact Angles10.1016/S0927-7757(03)00053-0 ↗
38. Ignition and Combustion Characteristics of Coal-Water-Oil Slurry Placed on Modified Metal Surface at Mixed Heat Transfer10.1016/j.fuproc.2022.107291 ↗