Numerical Simulation and Experimental Research on Multi-Channel Laser Directional Energy Deposition of IN718
Source abstract
Abstract
In this paper, the deposition layer calculation model is proposed for laser-directed energy deposition (DED) with coaxial powder feeding by combining the powder feeding equation with the volume of fluid (VOF) method, and the single-channel IN718 forming process is simulated in real-time with moving boundary conditions in a fixed coordinate system and experimentally validated. Under single-layer single-channel deposition processing, the deposition height and width decreased by 57.1% and 21.6%, respectively, as the scanning speed increased from 8 mm/s to 14 mm/s. The calculated deposition height, width, and melt pool depth were in good agreement with the experimental results. Calculating the temperature field distribution of the single-layer double-channel deposition at an overlapping-rate of 30% yielded the temperature fluctuation pattern of the deposition at various lap moments. Under the influence of the thermal accumulation of the first deposition channel, the latent heat effect of the melt pool will cause the maximum surface temperature during overlap processing to be slightly lower than the maximum surface temperature during single channel processing; at the same time, under the influence of the high-temperature state of the overlap deposition channel during the scanning process, the first deposition channel will exhibit rewarming during the overlap scanning process. The deposition layer and temperature field of single-layer multi-channel laser deposition are modelled using this information. It has been proved that the model may be used to forecast deposition and temperature fields for intricate processing procedures. The study findings are significant for understanding the process mechanism of coaxial powder feeding laser-directed energy deposition in detail and optimizing the process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China
Funding
National Natural Science Foundation of China-Joint Fund Key Projects in Guangdong Province · Project of Funds for International Cooperation and Exchange of the National Natural Science Foundation of China NSFC-RFBR
References (16)
Show source-provided references
1. Simulation Analysis of Temperature Field and Process Optimization of Laser Cladding Based on Internal Wire Feeding of Three Beams
2. Numerical Simulation and Experimental Study of Single Track Laser Cladding of 304 Stainless Steels10.3788/LOP56.091401 ↗
3. Laser Cladding Forming of Cantilevered Thin Walled PartBased on Hollow-Laser Beam Inside Powder Feeding Technology10.3788/CJL201542.1003003 ↗
4. Progerss in Numerical Simulation of Laser 3D Printing of Metal by Coaxial Powder Feeding: Flow in Welding Pool, Composition Distribution and Tissue Growth
5. Simulation Analysis and Experimental Study on Nanosecond Laser Cladding Silicon Nano Film10.3788/CJL201946.0402008 ↗
6. A Coupled Thermal, Fluid Flow, and Solidification Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part I)10.1007/s11663-014-0117-9 ↗
7. Numerical Simulation of Temperature Field Evolution in the Process of Laser Metal Deposition10.3788/CJL201542.0503006 ↗
8. Numerical Simulation and Experimental Research of Laser Cladding Based on Thermo-Mechanical Coupling10.3788/LOP56.051404 ↗
9. Caiazzo, F., and Alfieri, V. (2019). Simulation of Laser-assisted Directed Energy Deposition of Aluminum Powder: Prediction of Geometry and Temperature Evolution. Materials, 12.10.3390/ma12132100 ↗
10. Effect of pause time on temperature field of multi-channel cladding nickel-based alloy
11. Numerical simulation of flow field and temperature field in laser melting pool of titanium alloy10.3788/AL20143405.0389 ↗
12. Numerical modeling of coaxial powder stream in laser-powder-based Directed Energy Deposition process
13. Numerical simulation of laser cladding pool on titanium alloy surface
14. Effect of surface tension on small hole of laser deep fusion welding pool
15. Laser Additive Melting and Solidification of Inconel 718: Finite Element Simulation and Experiment10.1007/s11837-015-1765-1 ↗
16. Thermodynamic Calculation And Precipitation Behavior of α-Cr Phase In IN718 Alloy