Factorial Design to Stimulate Biomass Development with Chemically Modified Starch
Source abstract
Abstract
The present study is focused on mathematical modeling by testing the benefits of modified potato starch in the biomass production of microorganisms, such as the fungus type. Microorganisms need a carbon source for the biomass development. In different industries, microorganisms, such as the Penicillium type, are used for the extraction of different important compounds utilized in biotechnologies. The aim of this study is to establish some important parameters in order to stimulate the biomass production in the presence of chemically modified starch. The carbon sources used in this research are glucose, native potato starch, and chemically modified potato starch. The chemical modification of potato starch was realized with green chemical compounds in order to not influence biomass development. The chemical characterization of starch and modified starch was important in order to confirm the chemical modification of starch. The response function in mathematical modeling is the amount of biomass developed when there are varied parameters. The varied parameters for the factorial design are as follows: time of biomass development, mass report of glucose:starch (G:S), and mass report of glucose:modified starch (G:MS). The results obtained for the optimal values are as follows: 6 days for the biomass development, 1:1.35 for the mass report of G:S, and 1:1.27 for the report of G:MS.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Biofuel production and bioconversion · Anaerobic Digestion and Biogas Production · Microbial Metabolic Engineering and Bioproduction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial Systems Engineering and Management, University “Vasile Alecsandri”, 600115 Bacau, Romania
Department of Chemical and Food Engineering, University “Vasile Alecsandri”, 600115 Bacau, Romania
Department of Biology, Ecology, and Environmental Protection, University “Vasile Alecsandri”, 600115 Bacau, Romania
Funding
Ministry of Education and Research
References (31)
Show source-provided references
1. Hong, Y.-E., and Kweon, M. (2020). Optimization of the Formula and Processing Factors for Gluten-Free Rice Bread with Tamarind Gum. Foods, 9.10.3390/foods9020145 ↗
2. Kristiawan, M., Della Valle, G., and Berzin, F. (2022). Extrusion Simulation for the Design of Cereal and Legume Foods. Foods, 11.10.3390/foods11121780 ↗
3. Tian, Z., Hou, L., Hu, M., Gao, Y., Li, D., Fan, B., Wang, F., and Li, S. (2022). Optimization of Sporulation Conditions for Bacillus subtilis BSNK-5. Processes, 10.10.3390/pr10061133 ↗
4. Cassava-Starch-Based Films Incorporated with Buriti (Mauritia flexuosa L.) Oil: A New Active and Bioactive Material for Food Packaging Applications10.3390/polysaccharides3010006 ↗
5. Franco, E., Dussán, R., Navia, D.P., and Amú, M. (2021). Study of the Annealing Effect of Starch/Polyvinyl Alcohol Films Crosslinked with Glutaraldehyde. Gels, 7.10.3390/gels7040249 ↗
6. Synthesis and evaluation of hydroxypropylated potato starch as polymeric support for benzo[a]pyrene degradation by Fenton reaction10.1016/j.carbpol.2010.09.059 ↗
7. de Souza, A.F., Galindo, H.M., de Lima, M.A.B., Ribeaux, D.R., Rodríguez, D.M., da Silva Andrade, R.F., Gusmão, N.B., and de Campos-Takaki, G.M. (2020). Biotechnological Strategies for Chitosan Production by Mucoralean Strains and Dimorphism Using Renewable Substrates. Int. J. Mol. Sci., 21.10.3390/ijms21124286 ↗
8. Dudeney, A.W.L., Narayanan, A., and Tarasova, I.I. (1999). Removal Of Iron From Silica Sand: Integrated Effluent Treatment By Sulfate Reduction, Photochemical Reduction And Reverse Osmosis. Biohydrometallurgy and the Environment toward the Mining of the 21st Century, Elsevier. Process Metallurgy 9A.10.1016/S1572-4409(99)80151-5 ↗
9. An Archaeal Iron-Oxidising Extreme Acidophile Important In Acid Mine Drainage10.1126/science.287.5459.1796 ↗
10. Dynamic modelling of tetrazolium-based microbial toxicity assay—A parametric proxy of traditional dose-response relationship10.1007/s11356-021-13870-1 ↗
11. Importance Of Microbial Ecology In The Development Of New Mineral Technologies10.1016/S0304-386X(00)00183-3 ↗
12. Lens, P., and Hulshoff Pol, L. (2000). Biological Removal Of Sulfurous Compounds From Inorganic Wastewaters. Environmental Technologies to Treat Sulfur Pollution: Principles and Engineering, International Association on Water Quality.
13. Pitfalls of passive mine water treatment10.1023/A:1023219300286 ↗
14. Acidophiles In Bioreactor Mineral Processing10.1007/s007920050139 ↗
15. Enumeration And Characterization Of Acidophilic Microorganisms Isolated From A Pilot Plant Stirred Tank Bioleaching Operation10.1128/AEM.69.4.1936-1943.2003 ↗
16. Utilization Of Experimental Design For Specific Area Optimization Of A Pillared Bentonite
17. Modeling And Optimization of Al-Pillaring Process Using Experimental Design Procedure
18. Cerasola, V.A., Perlotti, L., Pennisi, G., Orsini, F., and Gianquinto, G. (2022). Potential Use of Superabsorbent Polymer on Drought-Stressed Processing Tomato (Solanum lycopersicum L.) in a Mediterranean Climate. Horticulturae, 8.10.3390/horticulturae8080718 ↗
19. Ajbar, A., Alqahtani, R.T., and Musa, S.S. (2022). Static and Dynamic Analysis of a Continuous Bioreactor Model for the Production of Biofuel from Refinery Wastewater Using Rhodococcus opacus. Mathematics, 10.10.3390/math10162842 ↗
20. Kubit, A., Trzepieciński, T., Kluz, R., Ochałek, K., and Slota, J. (2022). Multi-Criteria Optimisation of Friction Stir Welding Parameters for EN AW-2024-T3 Aluminium Alloy Joints. Materials, 15.10.3390/ma15155428 ↗
21. Meengam, C., and Sillapasa, K. (2020). Evaluation of Optimization Parameters of Semi-Solid Metal 6063 Aluminum Alloy from Friction Stir Welding Process Using Factorial Design Analysis. J. Manuf. Mater. Process., 4.10.3390/jmmp4040123 ↗
22. Nejrotti, S., Mannu, A., Blangetti, M., Baldino, S., Fin, A., and Prandi, C. (2020). Optimization of Nazarov Cyclization of 2,4-Dimethyl-1,5-diphenylpenta-1,4-dien-3-one in Deep Eutectic Solvents by a Design of Experiments Approach. Molecules, 25.10.3390/molecules25235726 ↗
23. Fotovvati, B., Balasubramanian, M., and Asadi, E. (2020). Modeling and Optimization Approaches of Laser-Based Powder-Bed Fusion Process for Ti-6Al-4V Alloy. Coatings, 10.10.3390/coatings10111104 ↗
24. Kiss, E.L., Berkó, S., Gácsi, A., Kovács, A., Katona, G., Soós, J., Csányi, E., Gróf, I., Harazin, A., and Deli, M.A. (2019). Design and Optimization of Nanostructured Lipid Carrier Containing Dexamethasone for Ophthalmic Use. Pharmaceutics, 11.10.3390/pharmaceutics11120679 ↗
25. Ramalho, M.J., Loureiro, J.A., Coelho, M.A.N., and Pereira, M.C. (2019). Factorial Design as a Tool for the Optimization of PLGA Nanoparticles for the Co-Delivery of Temozolomide and O6-Benzylguanine. Pharmaceutics, 11.10.3390/pharmaceutics11080401 ↗
26. Ali, I., Ahmad, M., and Ganat, T. (2021). Experimental Study of Bentonite-Free Water Based Mud Reinforced with Carboxymethylated Tapioca Starch: Rheological Modeling and Optimization Using Response Surface Methodology (RSM). Polymers, 13.10.3390/polym13193320 ↗
27. Influence of sugar and starch content of palm wood on fungal development and prevention of fungal colonization by acid treatment10.1515/hf-2015-0181 ↗
28. Use of a fractional factorial design to evaluate interactions of environmental factors affecting biodegradation rates10.1128/aem.42.6.936-943.1981 ↗
29. Worsfold, P., Townshend, A., and Poole, C. (2005). Chemometrics And Statistics | Experimental Design. Encyclopedia of Analytical Science, Elsevier. [2nd ed.].
30. Effects of process factors on the performance of electrochemical disinfection for wastewater in a continuous-flow cell reactor10.1007/s11356-021-13193-1 ↗
31. Kushwaha, O., Uthayakumar, H., and Kumaresan, K. (Environ. Sci. Pollut. Res., 2022). Modeling of carbon dioxide fixation by microalgae using hybrid artificial intelligence (AI) and fuzzy logic (FL) methods and optimization by genetic algorithm (GA), Environ. Sci. Pollut. Res., Online ahead of print.10.1007/s11356-022-19683-0 ↗