The Regression Model and the Problem of Inventory Centralization: Is the “Square Root Law” Applicable?
Source abstract
Abstract
The research problem undertaken by the authors of this article concerns the optimization of the size of the distribution network (the number of warehouses). The authors developed regression models, which are an alternative to the classical “Square Root law” optimization formula. The models were built for the two distributions of demand most commonly used in the literature: Gaussian and Gamma distribution. They allow the calculation of the level of inventory with a given number of warehouses and the level of stock availability as a measure of logistic customer service. The aim was to create a useful tool for decision-makers in companies. The models were elaborated on the base of the simulations carried out for various products (loading parameters, value), sales volumes, number of warehouses, and different standard deviations. Both regression models were statistically significant; the coefficients of determination are relevant. A slightly better value was obtained in the case of Gaussian distribution. The results obtained with the use of the classic “Square Root law” were in some cases quite similar. However, the type of distribution and the variability of demand, measured by standard deviation, have a significant influence here. Thus, the authors believe that the models developed may give more accurate results and that the “Square Root law” formula should be modified taking into account the characteristics of the demand. After completing the regression models with cost components, the total costs were calculated for selected cases of product groups (food, electronics, garments), different levels of the availability of stocks, and different number of warehouses. As it turned out, centralization may not necessarily be the optimal strategy for the most expensive goods. Loading parameters are also important, as they have a significant impact on the costs of storage and, above all, transport.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Urban and Freight Transport Logistics · Transport and Logistics Innovations · Supply Chain and Inventory Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Organization and Management, Institute of Management, Faculty of Economics, Finance and Management, University of Szczecin, 71-004 Szczecin, Poland
Department of Logistics, Institute of Management, Faculty of Economics, Finance and Management, University of Szczecin, 71-004 Szczecin, Poland
References (52)
Show source-provided references
1. Milewski, D. (2020). Total Costs of Centralized and Decentralized Inventory Strategies—Including External Costs. Sustainability, 12.10.3390/su12229346 ↗
2. Kotler, P. (2002). Marketing Management, Prentice Hill of India. [2nd ed.]. The Millennium Edition.
3. A simple method to compute economic order quantities10.1016/j.ejor.2008.05.019 ↗
4. The economic production quantity (EPQ) with shortage derived algebraically10.1016/S0925-5273(00)00068-2 ↗
5. EOQ and inflation uncertainty10.1016/S0925-5273(99)00034-1 ↗
6. Survey on Inventory Model of EOQ & EPQ with Partial Backorder Problems10.1016/j.matpr.2019.05.138 ↗
7. Production-inventory system with finite production rate, stock-dependent demand, and variable holding cost10.1051/ro/2013058 ↗
8. The optimal inventory policies for the economic order quantity (EOQ) model under conditions of two levels of trade credit and two warehouses in a supply chain system
9. Centralisation of Inventories and the “Square Root Law”10.1108/eb014366 ↗
10. Optimal inventories: The Square Root rule and profit maximization10.1111/j.1465-7295.1976.tb00387.x ↗
11. Inventory considerations in network design10.1002/j.2158-1592.2005.tb00197.x ↗
12. Chopra, S., and Meindl, P. (2007). Supply Chain Management: Strategy, Planning and Operation, Pearson Education.
13. Incorporating inventory control decisions into a strategic distribution network design model with stochastic demand10.1016/j.tre.2003.08.006 ↗
14. A single-product network design model with lead time and safety stock considerations10.1080/07408170600941631 ↗
15. Regression approximation for a partially centralized inventory system considering transportation costs10.1016/j.cie.2008.06.005 ↗
16. Optimal levels of (de)centralization for resilient supply chains10.1108/IJLM-01-2017-0013 ↗
17. Decentralized procurement in light of strategic inventories10.1287/mnsc.2014.1908 ↗
18. Organizational structure, and logistics service innovation10.1108/09574091111127543 ↗
19. Optimization of replenishment policies for decentralized and centralized capacitated supply chains under various demands10.1016/j.ijpe.2012.11.004 ↗
20. An integrated production and inventory model for a whole manufacturing supply chain involving reverse logistics with finite horizon period10.1016/j.omega.2012.07.001 ↗
21. An investigation on research and development cost reduction and channel strategies in competing supply chains
22. The degree of inventory centralization for food manufacturers10.1007/s11740-018-00872-1 ↗
23. Centralisation vs de-centralisation of warehousing: A small and medium-sized enterprise perspective10.1108/14626001211223946 ↗
24. Centralization versus decentralization: Risk pooling, risk diversification, and supply chain disruptions10.1016/j.omega.2014.06.002 ↗
25. Single or dual sourcing: Decision-making in the presence of supply chain disruption risks10.1016/j.omega.2008.05.006 ↗
26. A continuous-review inventory model with random disruptions at the primary supplier10.1016/j.ejor.2012.09.035 ↗
27. Selection of resilient supply portfolio under disruption risks
28. Petersson, S., and Sturesson, S. (2014). Centralization of Inventory Management for Spare Parts—A Case Study on its Performance Compared to the Current Inventory Control System at Arriva DK. [Master’s Thesis, Division of Production Management, Lund University].
29. Time-based distribution10.1108/09574099310805000 ↗
30. Impact on inventory costs with consolidation of distribution centers10.1080/07408170108936811 ↗
31. Role of inventory and transportation costs in determining the optimal degree of centralization10.1016/S1366-5545(97)00019-7 ↗
32. A simple decision rule for decentralized twoechelon inventory control
33. The impact of the number of parallel warehouses on total inventory10.1007/s00291-016-0442-2 ↗
34. An empirical examination of the assumptions of the Square Root Law for inventory centralisation and decentralization10.1080/00207543.2015.1071895 ↗
35. What’s the Penalty for Using the Square Root Law of Inventory Centralisation?10.1108/IJRDM-05-2017-0108 ↗
36. Milewski, D. (2011, January 4–6). Problem of optimal delivery sizes in a logistics system of a manufacturing enterprises. Proceedings of the BAI International Conference on Business and Information, Bangkok, Thailand.
37. Simulation as a way of optimizing a delivery size: Impact on the profitability of an enterprise
38. Mellin, A., Wikberg, A., Vierth, I., and Karlsson, R. (2013). Internalisation of External Effects in European Freight Corridors, International Transport Forum Discussion Papers.
39. The Economic and Environmental Implications of Centralized Stock Keeping10.1162/108819802763471799 ↗
40. Environmental impact of warehousing: A scenario analysis for the United States10.1080/00207543.2016.1211342 ↗
41. Assessment of CO2 emissions reduction in a distribution warehouse10.1016/j.energy.2010.05.006 ↗
42. Incorporating the environmental dimension in the assessment of automated warehouses10.1080/09537287.2014.990945 ↗
43. Energy-saving methodology for material handling applications10.1016/j.apenergy.2005.11.005 ↗
44. Carli, R., Dotoli, M., Digiesi, S., Facchini, F., and Mossa, G. (2020). Sustainable Scheduling of Material Handling Activities in Labor-Intensive Warehouses: A Decision and Control Model. Sustainability, 12.10.3390/su12083111 ↗
45. Boenzi, F., Digiesi, S., Facchini, F., and Mummmolo, G. (2017, January 18–20). Electric and LPG forklifts GHG assessment in material handling activities in actual operational conditions. Proceedings of the IEEE International Conference on Service Operations and Logistics, and Informatics, Bari, Italy.10.1109/SOLI.2017.8120982 ↗
46. Katalinic, B. (2015). Greening Activities in Warehouses: A Model for Identifying Sustainable Strategies in Material Handling. DAAAM International Scientific Book, Proceedings of the 26th DAAAM International Symposium, Zadar, Croatia, 21–24 October 2015, DAAAM International.
47. Minimizing the Carbon Footprint of Material Handling Equipment: Comparison of Electric and LPG Forklifts
48. Johnson, R., and Wichern, D. (1982). Applied Multivariate Statistical Analysis, Prentice-Hall.
49. Zastosowanie regresji wielokrotnej i sieci neuronowej do modelowania zjawiska tarcia
50. Między teorią a praktyką zarządzania zapasami
51. Maibach, M., Schreyer, C., Sutter, D., Van Essen, H.P., Boon, B.H., Smokers, R., Schroten, A., Doll, C., Pawlowska, B., and Bak, M. (2008). Handbook on Estimation of External Costs in the Transport Sector, CE Delft.
52. Schroten, A., van Essen, H., van Wijngaarden, L., Sutter, D., and Andrew, E. (2019). Sustainable Transport Infrastructure Charging and Internalisation of Transport Externalities: Executive Summary, INFRAS.