Mechanistic Study on the Influence of Stratigraphy on the Initiation and Expansion Pattern of Hydraulic Fractures in Shale Reservoirs
Source abstract
Abstract
The unique depositional characteristics of shale reservoirs lead to the extreme development of shale laminae, natural fractures, and other weak surfaces, which have an important influence on the hydraulic fracture extension behavior and the final fracture geometry. Therefore, because the deep shale laminar development and hydraulic fracture interaction theory and influence mechanism are not clear, this paper focuses on the analysis of the influence law of the ground stress difference, laminar surface cementation characteristics, laminar surface dip angle, and other factors on the hydraulic fracture extension pattern in shale reservoirs based on the cohesive unit method. Numerical calculation results show that (1) the hydraulic cracks are first expanded along the direction perpendicular to the minimum horizontal principal stress after starting to crack from the injection point and then turn to expand along the side of the laminar surface when encountering the laminar surface. (2) Three laminar dips of 5°, 30°, and 60° were compared and found. A certain ground stress difference is conducive to communicating more laminated joints and forming a more complex fracture network, while too large of a ground stress difference reduces the complexity of artificial fractures. (3) The smaller the inclination of the laminate surface is, the greater the positive stress it is subjected to, the more difficult it is for the laminate joints to undergo shear slip, and the more difficult it is to open. (4) Under the same ground stress combination state and laminar surface inclination, laminated cementation strengths of 2 and 0.5 MPa were compared, and it was found that the lower the cementation strength of the laminate is, the more likely the hydraulic fracture will be activated to shear slip damage. At the same time, the reliability of the simulation study on the effect of laminar surfaces on hydraulic fracture extension based on the cohesive unit method is verified by combining with the corresponding indoor hydraulic physical model test, which provides a reference for the accurate description of the interaction mechanism between laminar surfaces and hydraulic fractures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Underground Structures · Tunneling and Rock Mechanics · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development, Beijing 102206, China
Sinopec Research Institute of Petroleum Engineering, Beijing 102206, China
State Key Laboratory for Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing 400044, China
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China
Funding
State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development
References (20)
Show source-provided references
1. Global conventional−unconventional oil and gas formation distribution, resource potential and trend forecast
2. Basic characteristics of shale oil reservoirs and evaluation elements
3. Shale oil classification and evaluation
4. Exploring the evaluation criteria of shale oil and gas resources classification
5. Exploring the evaluation criteria of shale oil and gas resources classification
6. Meaning, Characteristics, Potential and Challenges of Tight Oil and Shale Oil
7. Current status of tight oil development in the U.S. and insights
8. Woodford growing revenues by farming to oil shale
9. Evaluation of Shale Gas Selection Areas in China from North American Shale Gas Exploration and Development
10. Study on the evaluation criteria of the “sweet spot” of inter−salt shale oil in Qianjiang Depression
11. Fan, S. (2020). Pore Structure Characteristics and Influencing Factors of the Inter−Salt Shale Oil Reservoir in Qianjiang Depression, Qianjiang Section 3, China University of Petroleum.
12. Zhang, C. (2020). Oil−Bearing and Movability Analysis of Inter−Salt Shales of Qianjiang Formation in Qianjiang Depression, Jianghan Basin, China University of Petroleum.
13. Microscopic reservoir characteristics of different petrographic phases of inter−salt shale oil reservoirs in Qianjiang Depression, Jianghan Basin—Example of 4 subsections of 10 rhymes in three sections of the Paleoproterozoic Qianjiang Formation
14. Analysis of the influence of mechanical parameters of stratified shale on fracture morphology of hydraulic fracturing
15. Wang, Y., Han, D., Zhao, L., Mitra, A., and Aldin, S. (2019, January 20–22). An experimental investigation of the anisotropic dynamic and static properties of eagle ford shales. Proceedings of the SPE/AAPG/SEG Unconventional Resources Technology Conference, Denver, CO, USA.10.15530/urtec-2019-304 ↗
16. Spatial and temporal characteristics of the damage process in carbonaceous shale Brazil under cleavage load
17. Analysis of physical characteristics of shale rock based on ultrasonic testing
18. Capacity model for fractured horizontal wells in shale reservoirs considering laminar seams
19. Study on the influence of laminae on shale hydraulic fracture extension
20. Fracture height prediction model and construction optimization method for fracturing Weiyuan shale gas reservoirs considering the influence of stratigraphy